SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Garcia Carrasco Alvaro 1989 ) "

Sökning: WFRF:(Garcia Carrasco Alvaro 1989 )

  • Resultat 51-60 av 166
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
51.
  • de la Luna, E., et al. (författare)
  • Understanding the physics of ELM pacing via vertical kicks in JET in view of ITER
  • 2016
  • Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 56:2
  • Tidskriftsartikel (refereegranskat)abstract
    • Experiments on JET, with both the previous carbon wall (JET-C) and the new Be/W wall (JET-ILW), have demonstrated the efficacy of using a fast vertical plasma motion (known as vertical kicks in JET) for active ELM control. In this paper we report on a series of experiments that have been recently conducted in JET-ILW with the goal of further improving the physics understanding of the processes governing the triggering of ELMs via vertical kicks. This is a necessary step to confidently extrapolate this ELM control method to ITER. Experiments have shown that ELMs can be reliably triggered provided a minimum vertical plasma displacement and velocity is imposed. The magnitude of the minimum displacement depends on the plasma parameters, being smaller for higher pedestal temperatures and lower collisionalities, which is encouraging in view of ITER. Modelling and stability analysis suggest that a localized current density induced by the vertical plasma movement close to the separatrix plays a major role in the ELM triggering mechanism, which is consistent with the experimental observations. The implications of these results for the extrapolation of this ELM control scheme to ITER are discussed.
  •  
52.
  • de Vries, P. C., et al. (författare)
  • Scaling of the MHD perturbation amplitude required to trigger a disruption and predictions for ITER
  • 2016
  • Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 56:2
  • Tidskriftsartikel (refereegranskat)abstract
    • The amplitude of locked instabilities, likely magnetic islands, seen as precursors to disruptions has been studied using data from the JET, ASDEX Upgrade and COMPASS tokamaks. It was found that the thermal quench, that often initiates the disruption, is triggered when the amplitude has reached a distinct level. This information can be used to determine thresholds for simple disruption prediction schemes. The measured amplitude in part depends on the distance of the perturbation to the measurement coils. Hence the threshold for the measured amplitude depends on the mode location (i.e. the rational q-surface) and thus indirectly on parameters such as the edge safety factor, q(95), and the internal inductance, li(3), that determine the shape of the q-profile. These dependencies can be used to set the disruption thresholds more precisely. For the ITER baseline scenario, with typically q(95) = 3.2, li(3) = 0.9 and taking into account the position of the measurement coils on ITER, the maximum allowable measured locked mode amplitude normalized to engineering parameters was estimated to be a.B-ML(r
  •  
53.
  • Denis, J., et al. (författare)
  • Dynamic modelling of local fuel inventory and desorption in the whole tokamak vacuum vessel for auto-consistent plasma-wall interaction simulations
  • 2019
  • Ingår i: Nuclear Materials and Energy. - : Elsevier. - 2352-1791. ; 19, s. 550-557
  • Tidskriftsartikel (refereegranskat)abstract
    • An extension of the SolEdge2D-EIRENE code package, named D-WEE, has been developed to add the dynamics of thermal desorption of hydrogen isotopes from the surface of plasma facing materials. To achieve this purpose, D-WEE models hydrogen isotopes implantation, transport and retention in those materials. Before launching autoconsistent simulation (with feedback of D-WEE on SolEdge2D-EIRENE), D-WEE has to be initialised to ensure a realistic wall behaviour in terms of dynamics (pumping or fuelling areas) and fuel content. A methodology based on modelling is introduced to perform such initialisation. A synthetic plasma pulse is built from consecutive SolEdge2D-EIRENE simulations. This synthetic pulse is used as a plasma background for the D-WEE module. A sequence of plasma pulses is simulated with D-WEE to model a tokamak operation. This simulation enables to extract at a desired time during a pulse the local fuel inventory and the local desorption flux density which could be used as initial condition for coupled plasma-wall simulations. To assess the relevance of the dynamic retention behaviour obtained in the simulation, a confrontation to post-pulse experimental pressure measurement is performed. Such confrontation reveals a qualitative agreement between the temporal pressure drop obtained in the simulation and the one observed experimentally. The simulated dynamic retention during the consecutive pulses is also studied.
  •  
54.
  • Drenik, A., et al. (författare)
  • Analysis of the outer divertor hot spot activity in the protection video camera recordings at JET
  • 2019
  • Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 139, s. 115-123
  • Tidskriftsartikel (refereegranskat)abstract
    • Hot spots on the divertor tiles at JET result in overestimation of the tile surface temperature which causes unnecessary termination of pulses. However, the appearance of hot spots can also indicate the condition of the divertor tile surfaces. To analyse the behaviour of the hot spots in the outer divertor tiles of JET, a simple image processing algorithm is developed. The algorithm isolates areas of bright pixels in the camera image and compares them to previously identified hot spots. The activity of the hot spots is then linked to values of other signals and parameters in the same time intervals. The operation of the detection algorithm was studied in a limited pulse range with high hot spot activity on the divertor tiles 5, 6 and 7. This allowed us to optimise the values of the controlling parameters. Then, the wider applicability of the method has been demonstrated by the analysis of the hot spot behaviour in a whole experimental campaign.
  •  
55.
  • Dumortier, P., et al. (författare)
  • Commissioning and first results of the reinstated JET ICRF ILA
  • 2017
  • Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 123, s. 285-288
  • Tidskriftsartikel (refereegranskat)abstract
    • The JET ICRF ITER-like Antenna (ILA) has been operated at 33,42 and 47 MHz in 2008-2009 but stopped operation in 2009 due to the failure of one of the tuning capacitors inside the antenna. Tests on a spare capacitor showed that a micro-leak was caused by the cycle wear of a capacitor's internal bellows. The ILA was reinstated with a new operating scheme minimizing the full stroke requests of the capacitor. This contribution gives an overview of the works undertaken to reinstate the JET ILA up to the first results on plasma. The capacitors were replaced and high voltage tests of the capacitors were performed. An extensive calibration of all the measurements in the RF circuit was carried out. New simulation tools were created and control algorithms were implemented for the - toroidal and poloidal - phase control of the array as well as for the matching of the second stage. New protections are being implemented for the thermal and voltage protection of the capacitors. Low voltage matching tests were performed before the high power commissioning. Finally the first results on plasma are presented, showing that the new controls allow extending the range of the operation to lower (29 MHz) and higher (51 MHz) frequencies than previously achieved.
  •  
56.
  • Eich, T., et al. (författare)
  • ELM divertor peak energy fluence scaling to ITER with data from JET, MAST and ASDEX upgrade
  • 2017
  • Ingår i: Nuclear Materials and Energy. - : Elsevier. - 2352-1791. ; 12, s. 84-90
  • Tidskriftsartikel (refereegranskat)abstract
    • A newly established scaling of the ELM energy fluence using dedicated data sets from JET operation with CFC & ILW plasma facing components (PFCs), ASDEX Upgrade (AUG) operation with both CFC and full-W PFCs and MAST with CFC walls has been generated. The scaling reveals an approximately linear dependence of the peak ELM energy with the pedestal top electron pressure and with the minor radius; a square root dependence is seen on the relative ELM loss energy. The result of this scaling gives a range in parallel peak ELM energy fluence of 10-30 MJm(-2) for ITER Q = 10 operation and 2.5-7.5 MJm(-2) for intermediate ITER operation at 7.5 MA and 2.65 T. These latter numbers are calculated using a numerical regression (epsilon(II) = 0.28 MJ/m(2) n(e)(0.75) T-e(1) Delta E-ELM(0.5) R-1(geo)). A simple model for ELM induced thermal load is introduced, resulting in an expression for the ELM energy fluence of epsilon(II) congruent to 6 pi p(e) R-geo q(edge). The relative ELM loss energy in the data is between 2-10% and the ELM energy fluence varies within a range of 10(0.5) similar to 3 consistently for each individual device. The so far analysed power load database for ELM mitigation experiments from JET-EFCC and Kicks, MAST-RMP and AUG-RMP operation are found to be consistent with both the scaling and the introduced model, ie not showing a further reduction with respect to their pedestal pressure. The extrapolated ELM energy fluencies are compared to material limits in ITER and found to be of concern.
  •  
57.
  • Eriksson, Frida, 1986, et al. (författare)
  • Impact of fast ions on density peaking in JET : fluid and gyrokinetic modeling
  • 2019
  • Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics Publishing (IOPP). - 0741-3335 .- 1361-6587. ; 61:7
  • Tidskriftsartikel (refereegranskat)abstract
    • The effect of fast ions on turbulent particle transport, driven by ion temperature gradient (ITG)/trapped electron mode turbulence, is studied. Two neutral beam injection (NBI) heated JET discharges in different regimes are analyzed at the radial position rho(t) = 0.6, one of them an L-mode and the other one an H-mode discharge. Results obtained from the computationally efficient fluid model EDWM and the gyro-fluid model TGLF are compared to linear and nonlinear gyrokinetic GENE simulations as well as the experimentally obtained density peaking. In these models, the fast ions are treated as a dynamic species with a Maxwellian background distribution. The dependence of the zero particle flux density gradient (peaking factor) on fast ion density, temperature and corresponding gradients, is investigated. The simulations show that the inclusion of a fast ion species has a stabilizing influence on the ITG mode and reduces the peaking of the main ion and electron density profiles in the absence of sources. The models mostly reproduce the experimentally obtained density peaking for the L-mode discharge whereas the H-mode density peaking is significantly underpredicted, indicating the importance of the NBI particle source for the H-mode density profile.
  •  
58.
  • Eriksson, Frida, 1986, et al. (författare)
  • Interpretative and predictive modelling of Joint European Torus collisionality scans
  • 2019
  • Ingår i: Plasma Physics and Controlled Fusion. - : Institute of Physics Publishing (IOPP). - 0741-3335 .- 1361-6587. ; 61:11
  • Tidskriftsartikel (refereegranskat)abstract
    • Transport modelling of Joint European Torus (JET) dimensionless collisionality scaling experiments in various operational scenarios is presented. Interpretative simulations at a fixed radial position are combined with predictive JETTO simulations of temperatures and densities, using the TGLF transport model. The model includes electromagnetic effects and collisions as well as (E)over-right-arrow x (b)over-right-arrow shear in Miller geometry. Focus is on particle transport and the role of the neutral beam injection (NBI) particle source for the density peaking. The experimental 3-point collisionality scans include L-mode, and H-mode (D and H and higher beta D plasma) plasmas in a total of 12 discharges. Experimental results presented in (Tala et al 2017 44th EPS Conf.) indicate that for the H-mode scans, the NBI particle source plays an important role for the density peaking, whereas for the L-mode scan, the influence of the particle source is small. In general, both the interpretative and predictive transport simulations support the experimental conclusions on the role of the NBI particle source for the 12 JET discharges.
  •  
59.
  • Fonnesu, N., et al. (författare)
  • The preparation of the Shutdown Dose Rate experiment for the next JET Deuterium-Tritium campaign
  • 2017
  • Ingår i: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 123, s. 1039-1043
  • Tidskriftsartikel (refereegranskat)abstract
    • The assessment of the Shutdown Dose Rate (SDR) due to neutron activation is a major safety issue for fusion devices and in the last decade several benchmark experiments have been conducted at JET during Deuterium-Deuterium experiments for the validation of the numerical tools used in ITER nuclear analyses. The future Deuterium-Tritium campaign at JET (DTE2) will provide a unique opportunity to validate the codes under ITER-relevant conditions through the comparison between numerical predictions and measured quantities (C/E). For this purpose, a novel SDR experiment, described in the present work, is in preparation in the frame of the WPJET3-NEXP subproject within EUROfusion Consortium. The experimental setup has been accurately designed to reduce measurement uncertainties; spherical air-vented ionization chambers (ICs) will be used for on-line ex-vessel decay gamma dose measurements during JET shutdown following DT operations and activation foils have been selected for measuring the neutron fluence near ICs during operations. Active dosimeters (based on ICs) have been calibrated over a broad energy range (from about 30 keV to 1.3 MeV) with X and gamma reference beam qualities. Neutron irradiation tests confirmed the capability of active dosimeters of performing on-line decay gamma dose rate measurements, to follow gamma dose decay at the end of neutron irradiation as well as insignificant activation of the ICs.
  •  
60.
  • Fortuna-Zalesna, E., et al. (författare)
  • Studies of dust from JET with the ITER-Like Wall : Composition and internal structure
  • 2017
  • Ingår i: Nuclear Materials and Energy. - : ELSEVIER. - 2352-1791. ; 12, s. 582-587
  • Tidskriftsartikel (refereegranskat)abstract
    • Results are presented for the dust survey performed at JET after the second experimental campaign with the ITER-Like Wall: 2013-2014. Samples were collected on adhesive stickers from several different positions in the divertor both on the tiles and on the divertor carrier. Brittle dust-forming deposits on test mirrors from the inner divertor wall were also studied. Comprehensive characterization accomplished by a wide range of high-resolution microscopy techniques, including focused ion beam, has led to the identification of several classes of particles: (i) beryllium flakes originating either from the Be coatings from the inner wall cladding or Be-rich mixed co-deposits resulting from material migration; (ii) beryllium droplets and splashes; (iii) tungsten and nickel-rich (from Inconel) droplets; (iv) mixed material layers with a various content of small (8-200 nm) W-Mo and Ni-based debris. A significant content of nitrogen from plasma edge cooling has been identified in all types of co-deposits. A comparison between particles collected after the first and second experimental campaign is also presented and discussed. (C) 2016 Published by Elsevier Ltd. This is an open access article under the CC BY-NC-ND license.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 51-60 av 166
Typ av publikation
tidskriftsartikel (155)
forskningsöversikt (6)
annan publikation (2)
konferensbidrag (1)
doktorsavhandling (1)
licentiatavhandling (1)
visa fler...
visa färre...
Typ av innehåll
refereegranskat (162)
övrigt vetenskapligt/konstnärligt (4)
Författare/redaktör
Garcia Carrasco, Alv ... (166)
Rubel, Marek (157)
Frassinetti, Lorenzo (155)
Zychor, I (155)
Hellsten, Torbjörn (154)
Petersson, Per (153)
visa fler...
Ström, Petter (153)
Weckmann, Armin (153)
Bykov, Igor (151)
Conroy, Sean (151)
Menmuir, Sheena (145)
Cecconello, Marco (145)
Eriksson, Jacob, Dr, ... (144)
Andersson Sundén, Er ... (143)
Ericsson, Göran (143)
Hjalmarsson, Anders (142)
Weiszflog, Matthias (141)
Possnert, Göran, 195 ... (140)
Sjöstrand, Henrik, 1 ... (140)
Bergsåker, Henric (122)
Binda, Federico, 198 ... (120)
Hellesen, Carl, 1980 ... (120)
Rachlew, Elisabeth, ... (119)
Skiba, Mateusz, 1985 ... (118)
Tholerus, Simon, 198 ... (105)
Dzysiuk, Nataliia (101)
Elevant, Thomas (90)
Ivanova, Darya (90)
Jonsson, Thomas, 197 ... (89)
Asp, E (72)
Zhou, Yushan (61)
Stefanikova, Estera (60)
Johnson, Thomas (50)
Tholerus, Emmi (38)
Rachlew, Elisabeth (34)
Ratynskaia, Svetlana (34)
Olivares, Pablo Vall ... (34)
Tolias, Panagiotis (34)
Tolias, Panagiotis, ... (32)
Ratynskaia, Svetlana ... (31)
Bergsåker, Henrik (30)
Skiba, M. (24)
Dzysiuk, N. (23)
Hellesen, C (22)
Binda, F. (22)
Militello Asp, Emili ... (13)
Dzysiuk, Natalia (13)
Batistoni, P (11)
Bobkov, V (11)
Murari, A (11)
visa färre...
Lärosäte
Kungliga Tekniska Högskolan (166)
Uppsala universitet (155)
Chalmers tekniska högskola (11)
Språk
Engelska (166)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (165)
Teknik (9)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy