| 31. |
|
|
| 32. |
- Agostini, Marco, 1987, et al.
(författare)
-
A high-power and fast charging Li-ion battery with outstanding cycle-life
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 7:1
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical energy storage devices based on Li-ion cells currently power almost all electronic devices and power tools. The development of new Li-ion cell configurations by incorporating innovative functional components (electrode materials and electrolyte formulations) will allow to bring this technology beyond mobile electronics and to boost performance largely beyond the state-of-theart. Here we demonstrate a new full Li-ion cell constituted by a high-potential cathode material, i.e. LiNi0.5Mn1.5O4, a safe nanostructured anode material, i.e. TiO2, and a composite electrolyte made by a mixture of an ionic liquid suitable for high potential applications, i.e. Pyr(1),4PF6, a lithium salt, i.e. LiPF6, and standard organic carbonates. The final cell configuration is able to reversibly cycle lithium for thousands of cycles at 1000 mAg(-1) and a capacity retention of 65% at cycle 2000.
|
|
| 33. |
- Agostini, Marco, 1987, et al.
(författare)
-
Stabilizing the Performance of High-Capacity Sulfur Composite Electrodes by a New Gel Polymer Electrolyte Configuration
- 2017
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 10:17, s. 3490-3496
-
Tidskriftsartikel (refereegranskat)abstract
- Increased pollution and the resulting increase in global warming are drawing attention to boosting the use of renewable energy sources such as solar or wind. However, the production of energy from most renewable sources is intermittent and thus relies on the availability of electrical energy-storage systems with high capacity and at competitive cost. Lithium–sulfur batteries are among the most promising technologies in this respect due to a very high theoretical energy density (1675 mAh g?1) and that the active material, sulfur, is abundant and inexpensive. However, a so far limited practical energy density, life time, and the scaleup of materials and production processes prevent their introduction into commercial applications. In this work, we report on a simple strategy to address these issues by using a new gel polymer electrolyte (GPE) that enables stable performance close to the theoretical capacity of a low cost sulfur–carbon composite with high loading of active material, that is, 70 % sulfur. We show that the GPE prevents sulfur dissolution and reduces migration of polysulfide species to the anode. This functional mechanism of the GPE membranes is revealed by investigating both its morphology and the Li-anode/GPE interface at various states of discharge/charge using Raman spectroscopy.
|
|
| 34. |
- Ahmed, Istaq, 1972, et al.
(författare)
-
Crystal structure and proton conductivity of BaZr0.9Sc0
- 2008
-
Ingår i: Journal of the American Ceramic Society. - : Wiley. - 0002-7820 .- 1551-2916. ; 91:9, s. 3039-3044
-
Tidskriftsartikel (refereegranskat)abstract
- Solid-state sintering has been used to prepare the perovskite BaZr0.9Sc0.1O3-delta. Analysis of X-ray powder diffraction data shows that an increase of the unit cell parameter, a, was observed after deuteration. Rietveld analysis of room-temperature neutron powder diffraction data confirmed cubic symmetry (space group Pm-3m). Dynamic thermogravimetric analysis indicates that the hydration process occurs below 335 degrees C and approximately 58% of the theoretical number of protonic defects can be filled. The presence of protons/deutrons is seen from the strong O-H/O-D stretch band in the infrared spectrum of the hydrated/deuterated samples. The proton conductivity of a prehydrated sample was investigated under dry and wet Ar atmospheres
|
|
| 35. |
- Ahmed, Istaq, 1972, et al.
(författare)
-
Structural study and proton conductivity of BaZr0.90Ga0.10O2.95
- 2006
-
Ingår i: Advances of Solid Oxide Fuel Cells II, Ceramic Engineering and Science Proceedings. - Hoboken, NJ, USA : John Wiley & Sons, Inc.. ; 27:4, s. 105-117
-
Tidskriftsartikel (refereegranskat)abstract
- Traditional solid state sintering has been used to prepare the perovskite BaZr0.9Ga0.1O2.95. Analysis of X-ray powder diffraction data shows that a decrease of the unit cell parameter a was observed compared to the undoped BaZrO3, which confirms successful substitution of Ga3+ for Zr4+ at the B site. Rietveld analysis of room temperature neutron powder diffraction data confirmed cubic symmetry (space group Pm-3m) for both as- prepared and deuterated BaZr0.90Ga0.10O2.95 samples. The strong O-H stretch band (2500-3500 cm−1) in the infrared absorbance spectrum clearly manifests the presence of protons in the pre-hydrated material. The bulk and total conductivities of prehydrated BaZr0.9Ga0.1O2.95 are 1.17 × 10−5 and 3.55 × 10−6 Scm−1, respectively at 400°C, which are more than one order of magnitude higher than for dried a sample at the same temperature. In contrast, the total conductivity of pre-hydrated and dried samples is similar at higher temperature, e. g. T > 800 °C. The higher activation energy (e. g. 0.7 eV) for pre-hydrated sample compared to typical value (0.4-0.5 eV) of proton conduction may suggest that the protons are trapped in the material.
|
|
| 36. |
|
|
| 37. |
|
|
| 38. |
- Antonson, P., et al.
(författare)
-
aP2-Cre-Mediated Inactivation of Estrogen Receptor Alpha Causes Hydrometra
- 2014
-
Ingår i: Plos One. - : Public Library of Science (PLoS). - 1932-6203. ; 9:1
-
Tidskriftsartikel (refereegranskat)abstract
- In this study we describe the reproductive phenotypes of a novel mouse model in which Cre-mediated deletion of ER alpha is regulated by the aP2 (fatty acid binding protein 4) promoter. ER alpha-floxed mice were crossed with transgenic mice expressing Cre-recombinase under the control of the aP2 promoter to generate aP2-Cre/ER alpha(flox/flox) mice. As expected, ER alpha mRNA levels were reduced in adipose tissue, but in addition we also detected an 80% reduction of ER alpha levels in the hypothalamus of aP2-Cre/ER alpha(flox/flox) mice. Phenotypic analysis revealed that aP2-Cre/ER alpha(flox/flox) female mice were infertile. In line with this, aP2-Cre/ER alpha(flox/flox) female mice did not cycle and presented 3.8-fold elevated estrogen levels. That elevated estrogen levels were associated with increased estrogen signaling was evidenced by increased mRNA levels of the estrogen-regulated genes lactoferrin and aquaporin 5 in the uterus. Furthermore, aP2-Cre/ER alpha(flox/flox) female mice showed an accumulation of intra-uterine fluid, hydrometra, without overt indications for causative anatomical anomalies. However, the vagina and cervix displayed advanced keratosis with abnormal quantities of accumulating squamous epithelial cells suggesting functional obstruction by keratin plugs. Importantly, treatment of aP2-Cre/ER alpha(flox/flox) mice with the aromatase inhibitor Letrozole caused regression of the hydrometra phenotype linking increased estrogen levels to the observed phenotype. We propose that in aP2-Cre/ER alpha(flox/flox) mice, increased serum estrogen levels cause over-stimulation in the uterus and genital tracts resulting in hydrometra and vaginal obstruction.
|
|
| 39. |
- Bruijn, Laura E., et al.
(författare)
-
A histopathological classification scheme for abdominal aortic aneurysm disease
- 2021
-
Ingår i: JVS-Vascular Science. - : Elsevier. - 2666-3503. ; 2, s. 260-273
-
Tidskriftsartikel (refereegranskat)abstract
- Objective: Two consensus histopathological classifications for thoracic aortic aneurysms (TAAs) and inflammatory aortic diseases have been issued to facilitate clinical decision-making and inter-study comparison. However, these consensus classifications do not specifically encompass abdominal aortic aneurysms (AAAs). Given its high prevalence and the existing profound pathophysiologic knowledge gaps, extension of the consensus classification scheme to AAAs would be highly instrumental. The aim of this study was to test the applicability of, and if necessary to adapt, the issued consensus classification schemes for AAAs.Methods: Seventy-two AAA anterolateral wall samples were collected during elective and emergency open aneurysm repair performed between 2002 and 2013. Histologic analysis (hematoxylin and eosin and Movat Pentachrome) and (semi-quantitative and qualitative) grading were performed in order to map the histological aspects of AAA. Immunohistochemistry was performed for visualization of aspects of the adaptive and innate immune system, and for a more detailed analysis of atherosclerotic lesions in AAA.Results: Because the existing consensus classification schemes do not adequately capture the aspects of AAA disease, an AAA-specific 11-point histopathological consensus classification was devised. Systematic application of this classification indicated several universal features for AAA (eg, [almost] complete elastolysis), but considerable variation for other aspects (eg, inflammation and atherosclerotic lesions).Conclusions: This first multiparameter histopathological AAA consensus classification illustrates the sharp histological contrasts between thoracic and abdominal aneurysms. The value of the proposed scoring system for AAA disease is illustrated by its discriminatory capacity to identify samples from patients with a nonclassical (genetic) variant of AAA disease.
|
|
| 40. |
- Calcagno, Giulio, 1990, et al.
(författare)
-
Fast charging negative electrodes based on anatase titanium dioxide beads for highly stable Li-ion capacitors
- 2020
-
Ingår i: Materials Today Energy. - : Elsevier BV. - 2468-6069. ; 16
-
Tidskriftsartikel (refereegranskat)abstract
- Hybrid energy storage systems aim to achieve both high power and energy densities by combining supercapacitor-type and battery-type electrodes in tandem. The challenge is to find sustainable materials as fast charging negative electrodes, which are characterized by high capacity retention. In this study, mesoporous anatase beads are synthetized with tailored morphology to exploit fast surface redox reactions. The TiO2-based electrodes are properly paired with a commercial activated carbon cathode to form a Li-ion capacitor. The titania electrode exhibits high capacity and rate performance. The device shows extremely stable performance with an energy density of 27 mWh g-1 at a specific current of 2.5 A g−1 for 10,000 cycles. The remarkable stability is associated with a gradual shift of the potential during cycling as result of the formation of cubic LiTiO2 on the surface of the beads. This phenomenon renews the interest in using TiO2 as negative electrode for Li-ion capacitors.
|
|
