| 31. |
- Schrag, A, et al.
(författare)
-
Health-related quality of life in multiple system atrophy
- 2006
-
Ingår i: Movement Disorders. - : Wiley. - 0885-3185. ; 21:6, s. 809-815
-
Tidskriftsartikel (refereegranskat)abstract
- Although multiple system atrophy (MSA) is a neurodegenerative disorder leading to progressive disability and decreased life expectancy, little is known about patients' own evaluation of their illness and factors associated with poor health-related quality of life (Hr-QoL). We, therefore, assessed Hr-QoL and its determinants in MSA. The following scales were applied to 115 patients in the European MSA-Study Group (EMSA-SG) Natural History Study: Medical Outcome Study Short Form (SF-36), EQ-513, Beck Depression Inventory (BDI), Mini-Mental state examination (MMSE), Unified MSA Rating Scale (UMSARS), Hoehn & Yahr (H&Y) Parkinson's disease staging scale, Composite Autonomic Symptom Scale (COMPASS), and Parkinson's Disease Sleep Scale (PDSS). Forty-six percent of patients had moderate to severe depression (BDI >= 17); Hr-QoL scores on the SF-36 and EQ-5D were significantly impaired. Pain, the only domain with similar scores in MSA and published PD patients, was reported more frequently in patients with MSA-P (predominantly parkinsonian motor subtype) than MSA-C (predominantly cerebellar motor subtype; 76% vs. 50%; P = 0.005). Hr-QoL scores correlated most strongly with UMSARS motor, COMPASS, and BDI scores but not with MMSE scores, age at onset, or disease duration. The COMPASS and UMSARS activities of daily living scores were moderate-to-strong predictors for the SF-36 physical summary score and the BDI and UMSARS motor scores for the SF-36 mental summary score. This report is the first study to show that Hr-QoL is significantly impaired in MSA. Although not all possible factors related to impaired Hr-QoL in MSA could be assessed, autonomic dysfunction, motor impairment, and depression were most closely associated with poor Hr-QoL, and therapeutic management, therefore, should concentrate upon these aspects of the disease. (c) 2006 Movement Disorder Society.
|
|
| 32. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 33. |
- Fanidi, Anouar, et al.
(författare)
-
Is high vitamin B12 status a cause of lung cancer?
- 2019
-
Ingår i: International Journal of Cancer. - : John Wiley & Sons. - 0020-7136 .- 1097-0215. ; 145:6, s. 1499-1503
-
Tidskriftsartikel (refereegranskat)abstract
- Vitamin B supplementation can have side effects for human health, including cancer risk. We aimed to elucidate the role of vitamin B12 in lung cancer etiology via direct measurements of pre‐diagnostic circulating vitamin B12 concentrations in a nested case–control study, complemented with a Mendelian randomization (MR) approach in an independent case–control sample. We used pre‐diagnostic biomarker data from 5183 case–control pairs nested within 20 prospective cohorts, and genetic data from 29,266 cases and 56,450 controls. Exposures included directly measured circulating vitamin B12 in pre‐diagnostic blood samples from the nested case–control study, and 8 single nucleotide polymorphisms associated with vitamin B12 concentrations in the MR study. Our main outcome of interest was increased risk for lung cancer, overall and by histological subtype, per increase in circulating vitamin B12 concentrations. We found circulating vitamin B12 to be positively associated with overall lung cancer risk in a dose response fashion (odds ratio for a doubling in B12 [ORlog2B12] = 1.15, 95% confidence interval (95%CI) = 1.06–1.25). The MR analysis based on 8 genetic variants also indicated that genetically determined higher vitamin B12 concentrations were positively associated with overall lung cancer risk (OR per 150 pmol/L standard deviation increase in B12 [ORSD] = 1.08, 95%CI = 1.00–1.16). Considering the consistency of these two independent and complementary analyses, these findings support the hypothesis that high vitamin B12 status increases the risk of lung cancer.
|
|
| 34. |
|
|
| 35. |
|
|
| 36. |
- Key, Timothy J., et al.
(författare)
-
Carotenoids, retinol, tocopherols, and prostate cancer risk : pooled analysis of 15 studies
- 2015
-
Ingår i: American Journal of Clinical Nutrition. - : Elsevier BV. - 0002-9165 .- 1938-3207. ; 102:5, s. 1142-1157
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Individual studies have suggested that circulating carotenoids, retinol, or tocopherols may be associated with prostate cancer risk, but the studies have not been large enough to provide precise estimates of associations, particularly by stage and grade of disease. Objective: The objective of this study was to conduct a pooled analysis of the associations of the concentrations of 7 carotenoids, retinol, alpha-tocopherol, and gamma-tocopherol with risk of prostate cancer and to describe whether any associations differ by stage or grade of the disease or other factors. Design: Principal investigators of prospective studies provided individual participant data for prostate cancer cases and controls. Risk by study-specific fifths of each biomarker was estimated by using multivariable-adjusted conditional logistic regression in matched case-control sets. Results: Data were available for up to 11,239 cases (including 1654 advanced stage and 1741 aggressive) and 18,541 controls from 15 studies. Lycopene was not associated with overall risk of prostate cancer, but there was statistically significant heterogeneity by stage of disease, and the OR for aggressive disease for the highest compared with the lowest fifth of lycopene was 0.65 (95% CI: 0.46, 0.91; P-trend = 0.032). No other carotenoid was significantly associated with overall risk of prostate cancer or with risk of advanced-stage or aggressive disease. For retinol, the OR for the highest compared with the lowest fifth was 1.13 (95% CI: 1.04, 1.22; P-trend = 0.015). For alpha-tocopherol, the OR for the highest compared with the lowest fifth was 0.86 (95% CI: 0.78, 0.94; P-trend < 0.001), with significant heterogeneity by stage of disease; the OR for aggressive prostate cancer was 0.74 (95% CI: 0.59, 0.92; P-trend = 0.001). gamma-Tocopherol was not associated with risk. Conclusions: Overall prostate cancer risk was positively associated with retinol and inversely associated with alpha-tocopherol, and risk of aggressive prostate cancer was inversely associated with lycopene and alpha-tocopherol. Whether these associations reflect causal relations is unclear.
|
|
| 37. |
- Crowe, Francesca L., et al.
(författare)
-
Circulating Fatty Acids and Prostate Cancer Risk : Individual Participant Meta-Analysis of Prospective Studies
- 2014
-
Ingår i: Journal of the National Cancer Institute. - : Oxford University Press (OUP). - 0027-8874 .- 1460-2105. ; 106:9, s. dju240-
-
Forskningsöversikt (refereegranskat)abstract
- BackgroundIndividual studies have suggested that some circulating fatty acids are associated with prostate cancer risk, but have not been large enough to provide precise estimates of associations, particularly by stage and grade of disease.MethodsPrincipal investigators of prospective studies on circulating fatty acids and prostate cancer were invited to collaborate. Investigators provided individual participant data on circulating fatty acids (weight percent) and other characteristics of prostate cancer cases and controls. Prostate cancer risk by study-specific fifths of 14 fatty acids was estimated using multivariable-adjusted conditional logistic regression. All statistical tests were two-sided.ResultsFive thousand and ninety-eight case patients and 6649 control patients from seven studies with an average follow-up of 5.1 (SD = 3.3) years were included. Stearic acid (18: 0) was inversely associated with total prostate cancer (odds ratio [OR] Q5 vs Q1 = 0.88, 95% confidence interval [CI] = 0.78 to 1.00, P-trend = .043). Prostate cancer risk was, respectively, 14% and 16% greater in the highest fifth of eicosapentaenoic acid (20:5n-3) (OR = 1.14, 95% CI = 1.01 to 1.29, P-trend = .001) and docosapentaenoic acid (22: 5n-3) (OR = 1.16, 95% CI = 1.02 to 1.33, P-trend = .003), but in each case there was heterogeneity between studies (P = .022 and P < .001, respectively). There was heterogeneity in the association between docosapentaenoic acid and prostate cancer by grade of disease (P = .006); the association was statistically significant for low-grade disease but not high-grade disease. The remaining 11 fatty acids were not statistically associated with total prostate cancer risk.ConclusionThere was no strong evidence that circulating fatty acids are important predictors of prostate cancer risk. It is not clear whether the modest associations of stearic, eicosapentaenoic, and docosapentaenoic acid are causal.
|
|
| 38. |
- Markt, Sarah C., et al.
(författare)
-
ABO Blood Group Alleles and Prostate Cancer Risk : results from the Breast and Prostate Cancer Cohort Consortium (BPC3)
- 2015
-
Ingår i: The Prostate. - : John Wiley & Sons. - 0270-4137 .- 1097-0045. ; 75:15, s. 1677-1681
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND. ABO blood group has been associated with risk of cancers of the pancreas, stomach, ovary, kidney, and skin, but has not been evaluated in relation to risk of aggressive prostate cancer. METHODS. We used three single nucleotide polymorphisms (SNPs) (rs8176746, rs505922, and rs8176704) to determine ABO genotype in 2,774 aggressive prostate cancer cases and 4,443 controls from the Breast and Prostate Cancer Cohort Consortium (BPC3). Unconditional logistic regression was used to calculate age and study-adjusted odds ratios and 95% confidence intervals for the association between blood type, genotype, and risk of aggressive prostate cancer (Gleason score >= 8 or locally advanced/metastatic disease (stage T3/T4/N1/M1). RESULTS. We found no association between ABO blood type and risk of aggressive prostate cancer (Type A: OR = 0.97, 95% CI = 0.87-1.08; Type B: OR = 0.92, 95% CI = n0.77-1.09; Type AB: OR = 1.25, 95% CI = 0.98-1.59, compared to Type O, respectively). Similarly, there was no association between "dose" of A or B alleles and aggressive prostate cancer risk. CONCLUSIONS. ABO blood type was not associated with risk of aggressive prostate cancer. Prostate 75: 1677-1681, 2015. (C) 2015 Wiley Periodicals, Inc.
|
|
| 39. |
|
|
| 40. |
- Merino, Jordi, et al.
(författare)
-
Quality of dietary fat and genetic risk of type 2 diabetes : individual participant data meta-analysis
- 2019
-
Ingår i: BMJ. British Medical Journal. - : BMJ Publishing Group Ltd. - 0959-8146 .- 0959-535X. ; 366
-
Tidskriftsartikel (refereegranskat)abstract
- OBJECTIVE To investigate whether the genetic burden of type 2 diabetes modifies the association between the quality of dietary fat and the incidence of type 2 diabetes.DESIGN Individual participant data meta-analysis.DATA SOURCES Eligible prospective cohort studies were systematically sourced from studies published between January 1970 and February 2017 through electronic searches in major medical databases (Medline, Embase, and Scopus) and discussion with investigators.REVIEW METHODS Data from cohort studies or multicohort consortia with available genome-wide genetic data and information about the quality of dietary fat and the incidence of type 2 diabetes in participants of European descent was sought. Prospective cohorts that had accrued five or more years of follow-up were included. The type 2 diabetes genetic risk profile was characterized by a 68-variant polygenic risk score weighted by published effect sizes. Diet was recorded by using validated cohort-specific dietary assessment tools. Outcome measures were summary adjusted hazard ratios of incident type 2 diabetes for polygenic risk score, isocaloric replacement of carbohydrate (refined starch and sugars) with types of fat, and the interaction of types of fat with polygenic risk score.RESULTS Of 102 305 participants from 15 prospective cohort studies, 20 015 type 2 diabetes cases were documented after a median follow-up of 12 years (interquartile range 9.4-14.2). The hazard ratio of type 2 diabetes per increment of 10 risk alleles in the polygenic risk score was 1.64 (95% confidence interval 1.54 to 1.75, I-2 = 7.1%, tau(2) = 0.003). The increase of polyunsaturated fat and total omega 6 polyunsaturated fat intake in place of carbohydrate was associated with a lower risk of type 2 diabetes, with hazard ratios of 0.90 (0.82 to 0.98, I-2 = 18.0%, tau(2) = 0.006; per 5% of energy) and 0.99 (0.97 to 1.00, I-2 = 58.8%, tau(2) = 0.001; per increment of 1 g/d), respectively. Increasing monounsaturated fat in place of carbohydrate was associated with a higher risk of type 2 diabetes (hazard ratio 1.10, 95% confidence interval 1.01 to 1.19, I-2 = 25.9%, tau(2) = 0.006; per 5% of energy). Evidence of small study effects was detected for the overall association of polyunsaturated fat with the risk of type 2 diabetes, but not for the omega 6 polyunsaturated fat and monounsaturated fat associations. Significant interactions between dietary fat and polygenic risk score on the risk of type 2 diabetes (P>0.05 for interaction) were not observed.CONCLUSIONS These data indicate that genetic burden and the quality of dietary fat are each associated with the incidence of type 2 diabetes. The findings do not support tailoring recommendations on the quality of dietary fat to individual type 2 diabetes genetic risk profiles for the primary prevention of type 2 diabetes, and suggest that dietary fat is associated with the risk of type 2 diabetes across the spectrum of type 2 diabetes genetic risk.
|
|
