| 51. |
- Wang, Yuwen, et al.
(författare)
-
Fast room-temperature hydrogenation of nitroaromatics on Pd nanocrystal-boron cluster/graphene oxide nanosheets
- 2022
-
Ingår i: Molecular Catalysis. - : Elsevier. - 2468-8231. ; 529
-
Tidskriftsartikel (refereegranskat)abstract
- The reduction of nitroaromatics to aminoaromatics is essential for fine chemical production and effective sewage treatment. However, the activity of an external catalyst is essential for the reaction. In this study, Pd nanocrystals were anchored in situ on two-dimensional graphene oxide (GO), which acted as a catalyst support with high specific surface area. The oxygen-containing groups on the surface of GO bonded to the functionally rich boron clusters through hydrogen bonding interactions. A mildly reducible closed-dodecahydrododecaboric acid anion cluster (closo‑[B12H12]2–) was employed as the target site. The mild reducibility of closo‑[B12H12]2– resulted in a wide dispersion of ultrafine Pd nanocrystals on GO. Under ambient conditions, Pd/BGO rapidly hydrogenated nitroaromatics, such as 4-nitrophenol, to aminoaromatics with approximately 100% efficiency. Moreover, Pd/BGO retained its high catalytic activity for the hydrogenation/reduction of 4-nitrophenol after five catalytic cycles. Therefore, Pd/BGO could be a promising and economically viable candidate for various practical applications. The proposed innovative preparation strategy and highly efficient catalytic activity suggested the effective performance of closo‑[B12H12]2– as nanometal nucleation target sites. In addition to providing an alternate route for preparing supported nanometals, this study presents a stable and efficient catalyst for the hydrogenation of nitroaromatics.
|
|
| 52. |
- Xiao, Wenming, et al.
(författare)
-
Toward best practice in cancer mutation detection with whole-genome and whole-exome sequencing
- 2021
-
Ingår i: Nature Biotechnology. - : Springer Nature. - 1087-0156 .- 1546-1696. ; 39:9, s. 1141-1150
-
Tidskriftsartikel (refereegranskat)abstract
- Recommendations are given on optimal read coverage and selection of calling algorithm to maximize the reproducibility of cancer mutation detection in whole-genome or whole-exome sequencing. Clinical applications of precision oncology require accurate tests that can distinguish true cancer-specific mutations from errors introduced at each step of next-generation sequencing (NGS). To date, no bulk sequencing study has addressed the effects of cross-site reproducibility, nor the biological, technical and computational factors that influence variant identification. Here we report a systematic interrogation of somatic mutations in paired tumor-normal cell lines to identify factors affecting detection reproducibility and accuracy at six different centers. Using whole-genome sequencing (WGS) and whole-exome sequencing (WES), we evaluated the reproducibility of different sample types with varying input amount and tumor purity, and multiple library construction protocols, followed by processing with nine bioinformatics pipelines. We found that read coverage and callers affected both WGS and WES reproducibility, but WES performance was influenced by insert fragment size, genomic copy content and the global imbalance score (GIV; G > T/C > A). Finally, taking into account library preparation protocol, tumor content, read coverage and bioinformatics processes concomitantly, we recommend actionable practices to improve the reproducibility and accuracy of NGS experiments for cancer mutation detection.
|
|
| 53. |
- Xu, Hai-Sen, et al.
(författare)
-
Single crystal of a one-dimensional metallo-covalent organic framework
- 2020
-
Ingår i: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Although polymers have been studied for well over a century, there are few examples of covalently linked polymer crystals synthesised directly from solution. One-dimensional (1D) covalent polymers that are packed into a framework structure can be viewed as a 1D covalent organic framework (COF), but making a single crystal of this has been elusive. Herein, by combining labile metal coordination and dynamic covalent chemistry, we discover a strategy to synthesise single-crystal metallo-COFs under solvothermal conditions. The single-crystal structure is rigorously solved using single-crystal electron diffraction technique. The non-centrosymmetric metallo-COF allows second harmonic generation. Due to the presence of syntactic pendant amine groups along the polymer chains, the metallopolymer crystal can be further cross-linked into a crystalline woven network. Although polymers have been studied for well over a century, there are few examples of covalently linked polymer crystals synthesized directly from solution. Here, the authors demonstrate a strategy to synthesize single crystalline 1D metallo-covalent organic frameworks by combining dynamic covalent chemistry and metal-ligand coordination.
|
|
| 54. |
- Xue, Xiaoyin, et al.
(författare)
-
PEDOT:PSS @Molecular Sieve as Dual-Functional Additive to Enhance Electrochemical Performance and Stability of Ni-Rich NMC Lithium-Ion Batteries
- 2020
-
Ingår i: Energy Technology. - : Wiley. - 2194-4288 .- 2194-4296. ; 8:10
-
Tidskriftsartikel (refereegranskat)abstract
- Molecular sieves (MSs) coated with conductive polymer (PEDOT:PSS) are used as water scavengers to modify the nickel‐rich LiNi1–x–yCoxMnyO2 (NMC)‐layered cathode. This strategy proactively captures residual water in the battery system without affecting the transport performance of electrons and Li+ ions. The moisture content and nuclear magnetic resonance (NMR) tests show that MSs after coating still maintain good water absorption characteristics and inhibit the decomposition of the electrolyte. The conductivity of the PEDOT:PSS@MS‐NMC electrode is 1.08 × 10−4 S cm−1, which is improved by 63.9%, compared with the MS‐NMC electrode. Through X‐ray photoelectron spectroscopy, transmission electron microscopy, and scanning electron microscopy measurements, it is also shown that the surface structure stability and particle integrity for PEDOT:PSS@MS‐NMC electrode is well retained. After 500 cycles, the capacity retention of the composite cathode is 71.3%, which is higher than that of the NMC (38.3%) and MS‐NMC cathode (62.4%). This is a novel and effective strategy to suppress side reactions at the electrode interface and improve electrode stability, capacity retention, and cycle performance of the Ni‐rich NMC cathode.
|
|
| 55. |
- Yang, Fu-Sheng, et al.
(författare)
-
Chromosome-level genome assembly of a parent species of widely cultivated azaleas
- 2020
-
Ingår i: Nature Communications. - : Nature Publishing Group. - 2041-1723. ; 11:1
-
Tidskriftsartikel (refereegranskat)abstract
- Azaleas (Ericaceae) comprise one of the most diverse ornamental plants, renowned for their cultural and economic importance. We present a chromosome-scale genome assembly for Rhododendron simsii, the primary ancestor of azalea cultivars. Genome analyses unveil the remnants of an ancient whole-genome duplication preceding the radiation of most Ericaceae, likely contributing to the genomic architecture of flowering time. Small-scale gene duplications contribute to the expansion of gene families involved in azalea pigment biosynthesis. We reconstruct entire metabolic pathways for anthocyanins and carotenoids and their potential regulatory networks by detailed analysis of time-ordered gene co-expression networks. MYB, bHLH, and WD40 transcription factors may collectively regulate anthocyanin accumulation in R. simsii, particularly at the initial stages of flower coloration, and with WRKY transcription factors controlling progressive flower coloring at later stages. This work provides a cornerstone for understanding the underlying genetics governing flower timing and coloration and could accelerate selective breeding in azalea. Azaleas are one of the most diverse ornamental plants and have cultural and economic importance. Here, the authors report a chromosome-scale genome assembly for the primary ancestor of the azalea cultivar Rhododendro simsi and identify transcription factors that may function in flower coloration at different stages.
|
|
| 56. |
- Zhai, Pan, et al.
(författare)
-
Ionic Conductive Thermoplastic Polymer Welding Layer for Low Electrode/Solid Electrolyte Interface Resistance
- 2020
-
Ingår i: ACS Applied Energy Materials. - : AMER CHEMICAL SOC. - 2574-0962. ; 3:7, s. 7011-7019
-
Tidskriftsartikel (refereegranskat)abstract
- The application of LAGP ceramic solid electrolytes is circumscribed by the large electrode/electrolyte interfacial resistance because of their rigidity and brittleness. Here, a highly cohesive composite polymer layer consisting of poly(vinylene carbonate)-thermoplastic polyurethanes (PVC-TPU) is coated onto both sides of the Li1.5Al0.5Ge1.5(PO4)(3) pellet to address the interfacial problems with the electrodes. The coated PVC-TPU acts as an ionic conductive welding layer to facilitate the interfacial contact of the LAGP pellet with both electrodes and decreases the interfacial resistance of the LAGP pellet against the cathode (from 1.4 x 10(6) to 3.8 x 10(3) Omega cm(2)) and the Li-metal anode (from 3.3 x 10(4) to 890 Omega cm(2)). The resulting composite solid-state electrolyte (CSSE) presents the synergistic effect of the LAGP ceramic pellet and the PVC-TPU layer in terms of electrochemical stability, ionic transport properties, and stable lithium plating/stripping cycling with a low overpotential for 1000 h. Consequently, the LiFePO4/Li solid-state batteries utilizing this CSSE deliver a high capacity retention of 95.3% after 100 cycles at room temperature with a high Coulombic efficiency exceeding 99.99% per cycle and lithium dendrite inhibition.
|
|
| 57. |
- Zhao, Beibei, et al.
(författare)
-
NaSn2(PO4)(3) submicro-particles for high performance Na/Li mixed-ion battery anodes
- 2020
-
Ingår i: Journal of Alloys and Compounds. - : ELSEVIER SCIENCE SA. - 0925-8388 .- 1873-4669. ; 844
-
Tidskriftsartikel (refereegranskat)abstract
- NaSn2(PO4)(3) has open framework, high ionic conductivity, low working potential, high theoretical capacity more than twice of graphite. However, its commercial application is limited by its low electrical conductivity and rapid capacity fading. To overcome this challenge, we synthesize NaSn2(PO4)(3) submicro-particles (around 100-300 nm in size) by hydrothermally assisted pyrolysis reactions. The synthesized NaSn2(PO4)(3) anode for Na/Li mixed-ion batteries delivers an ultrahigh initial discharge capacities, excellent rate performance and superior cycling stability. This design provides a promising pathway for developing high performance mixed-ion batteries. (C) 2020 Elsevier B.V. All rights reserved.
|
|
| 58. |
- Zhao, Hongxing, et al.
(författare)
-
Detection of SARS-CoV-2 antibodies in serum and dried blood spot samples of vaccinated individuals using a sensitive homogeneous proximity extension assay.
- 2022
-
Ingår i: New biotechnology. - : Elsevier BV. - 1871-6784 .- 1876-4347. ; 72, s. 139-148
-
Tidskriftsartikel (refereegranskat)abstract
- A homogeneous PCR-based assay for sensitive and specific detection of antibodies in serum or dried blood spots (DBS) is presented and the method is used to monitor individuals infected with or vaccinated against SARS-CoV-2. Detection probes were prepared by conjugating the recombinant spike protein subunit 1 (S1), containing the receptor binding domain (RBD) of SARS-CoV-2, to each of a pair of specific oligonucleotides. The same was done for the nucleocapsid protein (NP). Upon incubation with serum or DBS samples, the bi- or multivalency of the antibodies (IgG, IgA or IgM) brings pairs of viral proteins with their conjugated oligonucleotides in proximity, allowing the antibodies to be detected by a modified proximity extension assay (PEA). Anti-S1 and anti-NP antibodies could be detected simultaneously from one incubation reaction. This Antibody PEA (AbPEA) test uses only 1µl of neat or up to 100,000-fold diluted serum or one ø1.2mm disc cut from a DBS. All 100 investigated sera and 21 DBS collected prior to the COVID-19 outbreak were negative, demonstrating a 100% specificity. The area under the curve, as evaluated by Receiver Operating Characteristic (ROC) analysis reached 0.998 (95%CI: 0.993-1) for samples taken from 11 days after symptoms onset. The kinetics of antibody responses were monitored after a first and second vaccination using serially collected DBS from 14 individuals. AbPEA offers highly specific and sensitive solution-phase antibody detection without requirement for secondary antibodies, no elution step when using DBS sample in a simple procedure that lends itself to multiplex survey of antibody responses.
|
|
| 59. |
- Zhao, Xue, et al.
(författare)
-
Copper confined in vesicle-like BCN cavities promotes electrochemical reduction of nitrate to ammonia in water
- 2021
-
Ingår i: Journal of Materials Chemistry A. - : ROYAL SOC CHEMISTRY. - 2050-7488 .- 2050-7496. ; 9:41, s. 23675-23686
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical methods to convert high-concentration nitrates present in sewage into high-value-added ammonia do not just alleviate the problem of environmental pollution but also provide less energy-intensive alternatives to the Haber-Bosch process. In this work, a metal-boron organic polymer precursor was annealed at high temperature to obtain copper nanoparticles encapsulated in a vesicle-like BCN matrix (BCN@Cu). In the electrochemical reduction of nitrate (E-NIRR), this species exhibited excellent catalytic activity. Specifically, the ammonia yields of BCN@Cu under applied potentials of -0.3 V, -0.4 V, -0.5 V, and -0.6 V versus the reversible hydrogen electrode were 271.1 mu mol h(-1) mg(cat.)(-1), 354.8 mu mol h(-1) mg(cat.)(-1), 435.6 mu mol h(-1) mg(cat.)(-1), and 576.2 mu mol h(-1) mg(cat.)(-1), respectively, and the corresponding Faraday efficiencies were 86.3%, 88.0%, 89.3%, and 88.9%. Isotope labeling experiments with (NO3-)-N-15 confirmed that the detected ammonia had originated from the electrochemical reduction of NO3- on the catalyst surface. Moreover, the E-NIRR activity of BCN@Cu remained high even after using it ten consecutive times or 20 h of continuous operation, suggesting the practicality of the industrial application of BCN@Cu. The presence of copper was key in determining BCN@Cus E-NIRR activity, while the presence of boron greatly improved its catalytic performance. Furthermore, density functional theory calculations indicated that BCN does not itself promote the reaction but rather assists the dispersion of Cu nanoparticles, thereby expanding the catalysts active surface area.
|
|
| 60. |
- Zhao, Yi, et al.
(författare)
-
Improved Proton Adsorption and Charge Separation on Cadmium Sulfides for Photocatalytic Hydrogen Production
- 2022
-
Ingår i: Energy Technology. - : John Wiley & Sons. - 2194-4288 .- 2194-4296. ; 10:12
-
Tidskriftsartikel (refereegranskat)abstract
- Cadmium sulfide has attracted wide attention in photocatalytic hydrogen production, due to its appropriate bandgap and band positions. However, high-rate photogenerated electron-hole recombination and few active sites on CdS lead to its low photocatalytic activity. Herein, a PANI/NCPP/CdS (PANI/NiCoP/NiCoPi/CdS) hybrid as a noble metal-free visible light-driven photocatalyst is reported, with metal phosphides, metal phosphates, and polyaniline (PANI) as reduction and oxidation cocatalysts, respectively. This hybrid not only facilitates the charge separation and transfer owing to the formation of heterojunction, but also improves the local concentration of H+ on the surface of catalysts due to the formation of the protonated amine groups on PANI, bene?cial to hydrogen evolution reaction. As a result, the as-prepared photocatalyst could show a high hydrogen evolution rate of 170.3 mmol g(-1) h(-1) and an apparent quantum efficiency of 41.37% at 420 nm, representing one of the best performances of all-CdS-based photocatalysts.
|
|
