| 41. |
- Fang, Keyan, et al.
(författare)
-
Climate of the late Pleistocene and early Holocene in coastal South China inferred from submerged wood samples
- 2017
-
Ingår i: Quaternary International. - : Elsevier BV. - 1040-6182. ; 447, s. 111-117
-
Tidskriftsartikel (refereegranskat)abstract
- Tree-ring variability of submerged wood specimens in coastal areas provides important clues about sea level change and climate variability of the past. We dated submerged wood samples from coastal Fujian province in China using the radiocarbon methods and investigated their tree-ring variability. The submerged wood samples from the Shenhu Bay that date to the early Holocene (similar to 8000 calibrated years B.P.) may be related to the rise of the sea level after the Last Glacial Maximum (LGM). The submerged wood samples from the Qianhu Bay site dated to the Marine Isotope Stage 3 (MIS 3) (> 40,000 calibrated years B. P.). Most of the submerged wood samples are from coniferous trees with frequent branching tree rings. Frequent branching tree rings in this region are mostly found from the currently endangered coniferous species with narrow ecological amplitude at humid sites. Tree rings of the submerged sample show conspicuous interdecadal variability (similar to 20 years) than interannual variations, which differs from modern tree rings of nearby regions which have stronger interannual and multi-decadal variability. Our study highlights the potential to use submerged samples of coastal Southeast China for paleoclimate studies.
|
|
| 42. |
- Frieler, K, et al.
(författare)
-
Assessing the impacts of 1.5° C global warming - simulation protocol of the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP2b)
- 2017
-
Ingår i: Geoscientific Model Development. - : Copernicus GmbH. - 1991-959X .- 1991-9603. ; 10, s. 4321-4345
-
Tidskriftsartikel (refereegranskat)abstract
- In Paris, France, December 2015, the Conference of the Parties (COP) to the United Nations Framework Con- vention on Climate Change (UNFCCC) invited the Inter- governmental Panel on Climate Change (IPCC) to provide a “special report in 2018 on the impacts of global warming of 1.5 â—ŠC above pre-industrial levels and related global green- house gas emission pathwaysâ€. In Nairobi, Kenya, April 2016, the IPCC panel accepted the invitation. Here we de- scribe the response devised within the Inter-Sectoral Impact Model Intercomparison Project (ISIMIP) to provide tailored, cross-sectorally consistent impact projections to broaden the scientific basis for the report. The simulation protocol is de- signed to allow for (1) separation of the impacts of histori- cal warming starting from pre-industrial conditions from im- pacts of other drivers such as historical land-use changes (based on pre-industrial and historical impact model simula- tions); (2) quantification of the impacts of additional warm- ing up to 1.5 â—ŠC, including a potential overshoot and long- term impacts up to 2299, and comparison to higher lev- els of global mean temperature change (based on the low- emissions Representative Concentration Pathway RCP2.6 and a no-mitigation pathway RCP6.0) with socio-economic conditions fixed at 2005 levels; and (3) assessment of the cli- mate effects based on the same climate scenarios while ac- counting for simultaneous changes in socio-economic con- ditions following the middle-of-the-road Shared Socioeco- nomic Pathway (SSP2, Fricko et al., 2016) and in particu- lar differential bioenergy requirements associated with the transformation of the energy system to comply with RCP2.6 compared to RCP6.0.With the aim of providing the scientific basis for an aggregation of impacts across sectors and anal- ysis of cross-sectoral interactions that may dampen or am- plify sectoral impacts, the protocol is designed to facilitate consistent impact projections from a range of impact mod- els across different sectors (global and regional hydrology, lakes, global crops, global vegetation, regional forests, global and regional marine ecosystems and fisheries, global and regional coastal infrastructure, energy supply and demand, temperature-related mortality, and global terrestrial biodiver- sity).
|
|
| 43. |
- Jiao, Jian, et al.
(författare)
-
Effectiveness of non-surgical periodontal therapy in a large Chinese population with chronic periodontitis
- 2017
-
Ingår i: Journal of Clinical Periodontology. - : Wiley. - 0303-6979. ; 44:1, s. 42-50
-
Tidskriftsartikel (refereegranskat)abstract
- Aim: The aim of this study was to evaluate the effectiveness of non-surgical periodontal treatment (NSPT) and its influential factors in a large Chinese population with chronic periodontitis. Methods: Periodontal examination data of 10,789 patients with at least one periodontal re-evaluation record were extracted from a hospital-based electronic periodontal charting record system. Probing depth (PD) and bleeding index (BI) reductions after NSPT and their influential factors were analysed by multilevel analysis. Results: Mean PD reductions at patient level and site level were 0.62 and 0.65 mm respectively. Mean reductions of percentage of tooth with BI > 1 and BI > 2 were 14.9% and 25.21%. Multilevel analysis demonstrated that PD and BI reductions were mainly influenced by baseline PD, baseline attachment loss (AL), baseline mobility, tooth type and frequency of periodontal maintenance (FPM). Besides, PD reduction was associated with baseline BI for all sites and was associated with gender and smoking status for sites with baseline PD ≥ 5 mm. Conclusion: The effectiveness of NSPT on patients with chronic periodontitis was proved in a large Chinese population. Outcomes of NSPT were mainly influenced by baseline PD, baseline AL, baseline mobility, tooth type and FPM.
|
|
| 44. |
- Wang, Shuai, et al.
(författare)
-
In Situ Synthesis of Tungsten-Doped SnO2 and Graphene Nanocomposites for High-Performance Anode Materials of Lithium-Ion Batteries
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : AMER CHEMICAL SOC. - 1944-8244 .- 1944-8252. ; 9:20, s. 17163-17171
-
Tidskriftsartikel (refereegranskat)abstract
- The composite of tungsten-doped SnO2 and reduced graphene oxide was synthesized through a simple one pot hydrothermal method. According to the structural characterization of the composite, tungsten ions were doped in the unit cells of tin dioxide rather than simply attaching to the surface. Tungsten-doped SnO2 was in situ grown on the surface of graphene sheet to form a three-dimensional conductive network that enhanced the electron transportation and lithium-ion diffusion effectively. The issues of SnO2 agglomeration and volume expansion could be also avoided because the, tungsten-doped SnO2 nanoparticles were homogeneously distributed on a graphene sheet. As a result, the nanocomposite electrodes of tungsten-doped SnO2 and reduced graphene oxide exhibited an excellent long-term cycling performance. The residual capacity was still as high as 1100 mA h g(-1) at 0.1 A g(-1) after 100 cycles. It still remained at 776 mA h g(-1) after 2000 cycles at the current density of lA g(-1).
|
|
| 45. |
|
|
| 46. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 47. |
- Zhou, Yang, et al.
(författare)
-
Benzylamine-Treated Wide-Bandgap Perovskite with High Thermal-Photostability and Photovoltaic Performance
- 2017
-
Ingår i: Advanced Energy Materials. - : WILEY-V C H VERLAG GMBH. - 1614-6832 .- 1614-6840. ; 7:22
-
Tidskriftsartikel (refereegranskat)abstract
- Mixed iodide-bromide organolead perovskites with a bandgap of 1.70-1.80 eV have great potential to boost the efficiency of current silicon solar cells by forming a perovskite-silicon tandem structure. Yet, the stability of the perovskites under various application conditions, and in particular combined light and heat stress, is not well studied. Here, FA(0.15)Cs(0.85)Pb(I0.73Br0.27)(3), with an optical bandgap of approximate to 1.72 eV, is used as a model system to investigate the thermal-photostability of wide-bandgap mixed halide perovskites. It is found that the concerted effect of heat and light can induce both phase segregation and decomposition in a pristine perovskite film. On the other hand, through a postdeposition film treatment with benzylamine (BA) molecules, the highly defective regions (e.g., film surface and grain boundaries) of the film can be well passivated, thus preventing the progression of decomposition or phase segregation in the film. Besides the stability improvement, the BA-modified perovskite solar cells also exhibit excellent photovoltaic performance, with the champion device reaching a power conversion efficiency of 18.1%, a stabilized power output efficiency of 17.1% and an open-circuit voltage (V-oc) of 1.24 V.
|
|
