| 1. |
- Mamontov, Eugen, 1955, et al.
(author)
-
The minimal, phase-transition model for the cell-number maintenance by the hyperplasia-extended homeorhesis
- 2006
-
In: Acta Biotheoretica. - : Springer Science and Business Media LLC. - 0001-5342 .- 1572-8358. ; 54:2, s. 61-101
-
Journal article (peer-reviewed)abstract
- Oncogenic hyperplasia is the first and inevitable stage of formation of a (solid) tumor. This stage is also the core of many other proliferative diseases. The present work proposes the first minimal model that combines homeorhesis with oncogenic hyperplasia where the latter is regarded as a genotoxically activated homeorhetic dysfunction. This dysfunction is specified as the transitions of the fluid of cells from a fluid, homeorhetic state to a solid, hyperplastic-tumor state, and back. The key part of the model is a nonlinear reaction-diffusion equation (RDE) where the biochemical-reaction rate is generalized to the one in the well-known Schlögl physical theory of the non-equilibrium phase transitions. A rigorous analysis of the stability and qualitative aspects of the model, where possible, are presented in detail. This is related to the spatially homogeneous case, i.e. when the above RDE is reduced to a nonlinear ordinary differential equation. The mentioned genotoxic activation is treated as a prevention of the quiescent G0-stage of the cell cycle implemented with the threshold mechanism that employs the critical concentration of the cellular fluid and the nonquiescent-cell-duplication time. The continuous tumor morphogeny is described by a time-space-dependent cellular-fluid concentration. There are no sharp boundaries (i.e. no concentration jumps exist) between the domains of the homeorhesis- and tumor-cell populations. No presumption on the shape of a tumor is used. To estimate a tumor in specific quantities, the model provides the time-dependent tumor locus, volume, and boundary that also points out the tumor shape and size. The above features are indispensable in the quantitative development of antiproliferative drugs or therapies and strategies to prevent oncogenic hyperplasia in cancer and other proliferative diseases. The work proposes an analytical-numerical method for solving the aforementioned RDE. A few topics for future research are suggested.
|
|
| 2. |
|
|
| 3. |
- Surmeneva, Maria, et al.
(author)
-
Investigation of the HA film deposited on the porous Ti6Al4V alloy prepared via additive manufacturing
- 2015
-
In: IOP Conference Series. - IOP.
-
Conference paper (peer-reviewed)abstract
- This study is focused on the use of radio frequency magnetron sputtering to modify the surface of porous Ti6Al4V alloy fabricated via additive manufacturing technology. The hydroxyapatite (HA) coated porous Ti6Al4V alloy was studied in respect with its chemical and phase composition, surface morphology, water contact angle and hysteresis, and surface free energy. Thin nanocrystalline HA film was deposited while its structure with diamond-shaped cells remained unchanged. Hysteresis and water contact angle measurements revealed an effect of the deposited HA films, namely an increased water contact angle and contact angle hysteresis. The increase of the contact angle of the coating-substrate system compared to the uncoated substrate was attributed to the multiscale structure of the resulted surfaces.
|
|
| 4. |
- Cronskär, Marie, et al.
(author)
-
Patient-Specific Clavicle Reconstruction Using Digital Design and Additive Manufacturing
- 2015
-
In: Journal of mechanical design (1990). - : ASME Press. - 1050-0472 .- 1528-9001. ; 137:11
-
Journal article (peer-reviewed)abstract
- There is a trend toward operative treatment for certain types of clavicle fractures and these are usually treated with plate osteosynthesis. The subcutaneous location of the clavicle makes the plate fit important, but the clavicle has a complex shape, which varies greatly between individuals and hence standard plates often have a poor fit. Using computed tomography (CT) based design, the plate contour and screw positioning can be optimized to the actual case. A method for patient-specific plating using design based on CT-data, additive manufacturing (AM), and postprocessing was initially evaluated through three case studies, and the plate fit on the reduced fracture was tested during surgery (then replaced by commercial plates). In all three cases, the plates had an adequate fit on the reduced fracture. The time span from CT scan of the fracture to final implant was two days. An approach to achieve functional design and screw-hole positioning was initiated. These initial trials of patient-specific clavicle plating using AM indicate the potential for a smoother plate with optimized screw positioning. Further, the approach facilitates the surgeon's work and operating time can be saved.
|
|
| 5. |
- Lund Ohlsson, Marie, et al.
(author)
-
Estimation of muscular metabolic power in two different cross-country sit-skiing sledges using inverse-dynamics simulation
- 2022
-
In: Journal of Rehabilitation and Assistive Technologies Engineering. - : SAGE Publications. - 2055-6683 .- 2055-6683. ; 9
-
Journal article (peer-reviewed)abstract
- The aim of this study was to estimate and compare the muscular metabolic power produced in the human body using musculoskeletal inverse-dynamics during cross-country sit-skiing. Two sitting positions were adapted for athletes with reduced trunk and hip muscle control, knee low with frontal trunk support (KL-fix), and knee high (KH). Five female national class able-bodied cross-country skiers performed submaximal and maximal exercise in both sitting positions, while recording 3-D kinematics, pole forces, electromyography and respiratory variables. Simulations were performed from these experimental results and muscular metabolic power was computed. The main part of the muscle metabolic power was produced in the upper limbs for both sitting positions, but KH produced more muscle metabolic power in lower limbs and trunk during maximal intensity. KH was also more efficient, utilizing less muscular metabolic power during submaximal intensities, relatively less power in the upper limbs and more power in the trunk, hip and lower limb muscles. This implies that sitting position KH is preferable for high power output when using able-bodied simulation models. This study showed the potential of using musculoskeletal simulations to improve the understanding of how different equipment design and muscles contribute to performance.
|
|
| 6. |
|
|
| 7. |
- Vladescu, Alina, et al.
(author)
-
Influence of the electrolyte’s pH on the properties of electrochemically deposited hydroxyapatite coating on additively manufactured Ti64 alloy
- 2017
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 7:1
-
Journal article (peer-reviewed)abstract
- Properties of the hydroxyapatite obtained by electrochemical assisted deposition (ED) are dependenton several factors including deposition temperature, electrolyte pH and concentrations, appliedpotential. All of these factors directly influence the morphology, stoichiometry, crystallinity,electrochemical behaviour, and particularly the coating thickness. Coating structure together withsurface micro- and nano-scale topography significantly influence early stages of the implant biointegration.The aim of this study is to analyse the effect of pH modification on the morphology,corrosion behaviour and in vitro bioactivity and in vivo biocompatibility of hydroxyapatite preparedby ED on the additively manufactured Ti64 samples. The coatings prepared in the electrolytes withpH = 6 have predominantly needle like morphology with the dimensions in the nanometric scale(~30 nm). Samples coated at pH = 6 demonstrated higher protection efficiency against the corrosiveattack as compared to the ones coated at pH = 5 (~93% against 89%). The in vitro bioactivity resultsindicated that both coatings have a greater capacity of biomineralization, compared to the uncoatedTi64. Somehow, the coating deposited at pH = 6 exhibited good corrosion behaviour and highbiomineralization ability. In vivo subcutaneous implantation of the coated samples into the white rats for up to 21 days with following histological studies showed no serious inflammatory process.
|
|
| 8. |
- Liu, Rong, et al.
(author)
-
Preparation of the four stereoisomers of 3-bromo-2-butanol or their acetates via lipase-catalysed resolutions of the racemates derived from dl- or meso-2,3-butanediol
- 2005
-
In: Tetrahedron. - : Elsevier BV. - 0957-4166 .- 1362-511X. ; 16:15, s. 2607-2611
-
Journal article (peer-reviewed)abstract
- The four stereoisomeric 3-bromo-2-butanols and/or their acetates were prepared via lipase-catalysed kinetic resolution by hydrolyses of the acetates of the (+/-)-syn- and (+/-)-anti-3-bromo-2-butanols, or via esterifications of the alc hols. The diastereomeric bromoacetates were obtained by syntheses from the dl- and meso-2,3-butanediols, respectively. On a preparative scale, the four stereoisomers, either as the free alcohols or as their acetates, were obtained in > 95% ee, and in 35-40% yield (based on the starting racemates).
|
|
| 9. |
- Koptyug, Andrey, 1956-, et al.
(author)
-
Electron Beam Melting : Moving from Macro- to Micro- and Nanoscale
- 2012
-
In: Materials Science Forum. - Switzerland : Trans Tech Publications Inc.. ; , s. 532-537
-
Conference paper (peer-reviewed)abstract
- This paper presents some results achieved in the biomedical applications of the EBM® technology, and describes the resolved and unresolved challenges presented by modern medical implant manufacturing. In particular it outlines the issues related to the cellular structure design and metal surface modification. Moving to precision control of the metal surface at a microand sub-micrometer scale is a serious challenge to the EBM® processing, because it uses the powder with average grain size of about 0.04 to 0.1 mm. Though manufacturing of components with solidmesh geometry and porous surfaces using EBM® is quite possible, post- processing (for example chemical or electrochemical) is needed to achieve desired control of the surface at smaller scales to realize full potential of the technology for biomedical applications.
|
|
| 10. |
- Persson, Johan, et al.
(author)
-
Stiffness and strength of cranioplastic implant systems in comparison to cranial bone
- 2018
-
In: Journal of Cranio-Maxillofacial Surgery. - : Elsevier BV. - 1010-5182 .- 1878-4119. ; 46:3, s. 418-423
-
Journal article (peer-reviewed)abstract
- Purpose: The aim of this study was to evaluate skull replacement options after decompressive craniectomy by systematically investigating which combination of geometrical properties and material selection would result in a mechanical response comparable in stiffness to that of native skull bone and a strength as high or higher than the same. Materials and methods: The study was conducted using a Finite Element Model of the top part of a human skull. Native skull bone, autografts and commercial implants made of PEEK, solid titanium, two titanium meshes and a titanium-ceramic composite were modeled under a set load to evaluate deformation and maximum stress. Results: The computational result showed a large variation of the strength and effective stiffness of the autografts and implants. The stiffness of native bone varied by a factor of 20 and the strength by a factor of eight. The implants span the entire span of the native skull, both in stiffness and strength. Conclusion: All the investigated implant materials had a potential for having the same effective stiffness as the native skull bone. All the materials also had the potential to be as strong as the native bone. To match inherent properties, the best choice of material and thickness is thus patient specific, depending on the quality of the patient's native bone.
|
|
