| 1. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Characterization of Binding of Magnetic Nanoparticles to Rolling Circle Amplification Products by Turn-On Magnetic Assay
- 2019
-
Ingår i: Biosensors-Basel. - : MDPI AG. ; 9:3
-
Tidskriftsartikel (refereegranskat)abstract
- The specific binding of oligonucleotide-tagged 100 nm magnetic nanoparticles (MNPs) to rolling circle products (RCPs) is investigated using our newly developed differential homogenous magnetic assay (DHMA). The DHMA measures ac magnetic susceptibility from a test and a control samples simultaneously and eliminates magnetic background signal. Therefore, the DHMA can reveal details of binding kinetics of magnetic nanoparticles at very low concentrations of RCPs. From the analysis of the imaginary part of the DHMA signal, we find that smaller MNPs in the particle ensemble bind first to the RCPs. When the RCP concentration increases, we observe the formation of agglomerates, which leads to lower number of MNPs per RCP at higher concentrations of RCPs. The results thus indicate that a full frequency range of ac susceptibility observation is necessary to detect low concentrations of target RCPs and a long amplification time is not required as it does not significantly increase the number of MNPs per RCP. The findings are critical for understanding the underlying microscopic binding process for improving the assay performance. They furthermore suggest DHMA is a powerful technique for dynamically characterizing the binding interactions between MNPs and biomolecules in fluid volumes.
|
|
| 2. |
- Wojas, Natalia
(författare)
-
The dynamic surface nature of calcite and its role in determining the adsorptive stability toward hydrophobizing carboxylic fatty acids
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Calcium carbonate has attracted a lot of interest over the centuries. Nowadays, mainly as mineral pigment and filler, it has a wide use in technological applications ranging from paper, construction, polymers, and environmental solutions to consumer goods. Amongst these uses, the filler pigment is required to display either hydrophilicity (for applications in aqueous colloidal systems, including, for example, in paper and emulsion paints), or, in contrast, oleophilicity (for applications in contact with oil-based systems, such as plastics and volatile solvent-containing sealants). To achieve oleophilicity, and resulting hydrophobicity, the filler is surface treated, typically using carboxylic fatty acids. In this thesis, effects of humidity and fatty carboxylic acids vapor on CaCO3 surface wettability and nanomechanical properties were studied, with the aim to gain knowledge on layer packing density and order, as well as resistance to water exposure and mechanical wear. A better understanding of the dynamic nature of the calcite surface presented in this work allows the industry to increase sustainable control over materials production and storage. First, a setup combining an atomic force microscope (AFM) with a humidifier was used to map nanomechanical properties of growing surface domains (hydrated form of CaCO3) formed by ion dissolution, diffusion, and redeposition, a process that is not reversible upon drying. Secondly, AFM and contact angle goniometer measurements showed that the stability of the calcite surface improves with increasing carboxylic acid chain length (C2 to C18). Meanwhile, X-ray photoelectron spectroscopy and vibrational sum frequency spectroscopy techniques demonstrated that a coherent layer with maximum packing density of carboxylate and carboxylic acid species was achieved with the use of stearic acid (C18) with high enough vapor pressure and exposure time. The AFM images successfully visualized that a complete C18 monolayer is capable of countering nano-wear of the calcite surface despite the humidity (under the range of loads investigated in this work) and the layer has self-healing properties, while calcite displayed high abrasive wear. Further, when calcite coated by a highly packed monolayer of C18 was covered with a water droplet, a large contact angle hysteresis resulted in a coffee ring effect (CRE). That is leading to formation of hillocks at the contact line consisting of dissolved fatty carboxylic acid and possibly calcium bicarbonate Ca(HCO3)2 molecules transported from the bare calcite region that also is created next to the droplet edge. Interestingly, C18 coated calcite remained considerably more stable in the case where a water droplet saturated with octanoic acid was used instead of water; thus, it was concluded that the CRE can be contained via reduction of the liquid surface tension and contact angle hysteresis.
|
|
| 3. |
- Schuster, Erich, et al.
(författare)
-
Interplay between flow and diffusion in capillary alginate hydrogels
- 2016
-
Ingår i: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 12:17, s. 3897-3907
-
Tidskriftsartikel (refereegranskat)abstract
- Alginate gels with naturally occurring macroscopic capillaries have been used as a model system to study the interplay between laminar flow and diffusion of nanometer-sized solutes in real time. Calcium alginate gels that contain homogeneously distributed parallel-aligned capillary structures were formed by external addition of crosslinking ions to an alginate sol. The effects of different flow rates (0, 1, 10, 50 and 100 μl min-1) and three different probes (fluorescein, 10 kDa and 500 kDa fluorescein isothiocyanate-dextran) on the diffusion rates of the solutes across the capillary wall and in the bulk gel in between the capillaries were investigated using confocal laser scanning microscopy. The flow in the capillaries was produced using a syringe pump that was connected to the capillaries via a tube. Transmission electron microscopy revealed an open aggregated structure close to the capillary wall, followed by an aligned network layer and the isotropic network of the bulk gel. The most pronounced effect was observed for the 1 nm-diameter fluorescein probe, for which an increase in flow rate increased the mobility of the probe in the gel. Fluorescence recovery after photobleaching confirmed increased mobility close to the channel, with increasing flow rate. Mobility maps derived using raster image correlation spectroscopy showed that the layer with the lowest mobility corresponded to the anisotropic layer of ordered network chains. The combination of microscopy techniques used in the present study elucidates the flow and diffusion behaviors visually, qualitatively and quantitatively, and represents a promising tool for future studies of mass transport in non-equilibrium systems.
|
|
| 4. |
- Skedung, Lisa, et al.
(författare)
-
Feeling small : Exploring the Tactile Perception Limits
- 2013
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322. ; 3, s. 2617-
-
Tidskriftsartikel (refereegranskat)abstract
- The human finger is exquisitely sensitive in perceiving different materials, but the question remains as to what length scales are capable of being distinguished in active touch. We combine material science with psychophysics to manufacture and haptically explore a series of topographically patterned surfaces of controlled wavelength, but identical chemistry. Strain-induced surface wrinkling and subsequent templating produced 16 surfaces with wrinkle wavelengths ranging from 300 nm to 90 mu m and amplitudes between 7 nm and 4.5 mu m. Perceived similarities of these surfaces (and two blanks) were pairwise scaled by participants, and interdistances among all stimuli were determined by individual differences scaling (INDSCAL). The tactile space thus generated and its two perceptual dimensions were directly linked to surface physical properties - the finger friction coefficient and the wrinkle wavelength. Finally, the lowest amplitude of the wrinkles so distinguished was approximately 10 nm, demonstrating that human tactile discrimination extends to the nanoscale.
|
|
| 5. |
- Li, Hua, et al.
(författare)
-
Addition of low concentrations of an ionic liquid to a base oil reduces friction over multiple length scales : a combined nano- and macrotribology investigation
- 2016
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 18:9, s. 6541-6547
-
Tidskriftsartikel (refereegranskat)abstract
- The efficacy of ionic liquids (ILs) as lubricant additives to a model base oil has been probed at the nanoscale and macroscale as a function of IL concentration using the same materials. Silica surfaces lubricated with mixtures of the IL trihexyl(tetradecyl) phosphonium bis(2,4,4-trimethylpentyl)phosphinate and hexadecane are probed using atomic force microscopy (AFM) (nanoscale) and ball-on-disc tribometer (macroscale). At both length scales the pure IL is a much more effective lubricant than hexadecane. At the nanoscale, 2.0 mol% IL (and above) in hexadecane lubricates the silica as well as the pure IL due to the formation of a robust IL boundary layer that separates the sliding surfaces. At the macroscale the lubrication is highly load dependent; at low loads all the mixtures lubricate as effectively as the pure IL, whereas at higher loads rather high concentrations are required to provide IL like lubrication. Wear is also pronounced at high loads, for all cases except the pure IL, and a tribofilm is formed. Together, the nano- and macroscales results reveal that the IL is an effective lubricant additive - it reduces friction - in both the boundary regime at the nanoscale and mixed regime at the macroscale.
|
|
| 6. |
- Wieland, D. C. Florian, et al.
(författare)
-
Structure of DPPC-hyaluronan interfacial layers - effects of molecular weight and ion composition
- 2016
-
Ingår i: Soft Matter. - : Royal Society of Chemistry. - 1744-683X .- 1744-6848. ; 12:3, s. 729-740
-
Tidskriftsartikel (refereegranskat)abstract
- Hyaluronan and phospholipids play an important role in lubrication in articular joints and provide in combination with glycoproteins exceptionally low friction coefficients. We have investigated the structural organization of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) Langmuir layers at the solution-air interface at different length scales with respect to the adsorption of hyaluronan (HA). This allows us to assemble a comprehensive picture of the adsorption and the resulting structures, and how they are affected by the molecular weight of HA and the presence of calcium ions. Brewster angle microscopy and grazing incident diffraction were used to determine the lateral structure at the micro- and macro scale. The data reveals an influence of HA on both the macro and micro structure of the DPPC Langmuir layer, and that the strength of this effect increases with decreasing molecular weight of HA and in presence of calcium ions. Furthermore, from X-ray reflectivity measurements we conclude that HA adsorbs to the hydrophilic part of DPPC, but data also suggest that two types of interfacial structures are formed at the interface. We argue that hydrophobic forces and electrostatic interactions play important rules for the association between DPPC and HA. Surface pressure area isotherms were used to determine the influence of HA on the phase behavior of DPPC while electrophoretic mobility measurements were used to gain insight into the binding of calcium ions to DPPC vesicles and hyaluronan.
|
|
| 7. |
- Muneer, Faraz, et al.
(författare)
-
Nanostructural Morphology of Plasticized Wheat Gluten and Modified Potato Starch Composites: Relationship to Mechanical and Barrier Properties
- 2015
-
Ingår i: Biomacromolecules. - : American Chemical Society (ACS). - 1526-4602 .- 1525-7797. ; 16:3, s. 695-705
-
Tidskriftsartikel (refereegranskat)abstract
- In the present study, we were able to produce composites of wheat gluten (WG) protein and a novel genetically modified potato starch (MPS) with attractive mechanical and gas barrier properties using extrusion. Characterization of the MPS revealed an altered chain length distribution of the amylopectin fraction and slightly increased amylose content compared to wild type potato starch. WG and MPS of different ratios plasticized with either glycerol or glycerol and water were extruded at 110 and 130 °C. The nanomorphology of the composites showed the MPS having semicrystalline structure of a characteristic lamellar arrangement with an approximately 100 Å period observed by small-angle X-ray scattering and a B-type crystal structure observed by wide-angle X-ray scattering analysis. WG has a structure resembling the hexagonal macromolecular arrangement as reported previously in WG films. A larger amount of β-sheets was observed in the samples 70/30 and 30/70 WG-MPS processed at 130 °C with 45% glycerol. Highly polymerized WG protein was found in the samples processed at 130 °C versus 110 °C. Also, greater amounts of WG protein in the blend resulted in greater extensibility (110 °C) and a decrease in both E-modulus and maximum stress at 110 and 130 °C, respectively. Under ambient conditions the WG-MPS composite (70/30) with 45% glycerol showed excellent gas barrier properties to be further explored in multilayer film packaging applications.
|
|
| 8. |
- Ahrentorp, Fredrik, et al.
(författare)
-
Sensitive magnetic biodetection using magnetic multi-core nanoparticles and RCA coils
- 2017
-
Ingår i: Journal of Magnetism and Magnetic Materials. - : Elsevier BV. - 0304-8853 .- 1873-4766. ; 427, s. 14-18
-
Tidskriftsartikel (refereegranskat)abstract
- We use functionalized iron oxide magnetic multi-core particles of 100 nm in size (hydrodynamic particle diameter) and AC susceptometry (ACS) methods to measure the binding reactions between the magnetic nanoparticles (MNPs) and bio-analyte products produced from DNA segments using the rolling circle amplification (RCA) method. We use sensitive induction detection techniques in order to measure the ACS response. The DNA is amplified via RCA to generate RCA coils with a specific size that is dependent on the amplification time. After about 75 min of amplification we obtain an average RCA coil diameter of about 1 mu m. We determine a theoretical limit of detection (LOD) in the range of 11 attomole (corresponding to an analyte concentration of 55 fM for a sample volume of 200 mu L) from the ACS dynamic response after the MNPs have bound to the RCA coils and the measured ACS readout noise. We also discuss further possible improvements of the LOD.
|
|
| 9. |
|
|
| 10. |
- Sepehri, Sobhan, 1986, et al.
(författare)
-
Homogeneous Differential Magnetic Assay
- 2019
-
Ingår i: Acs Sensors. - : American Chemical Society (ACS). - 2379-3694. ; 4:9, s. 2381-2388
-
Tidskriftsartikel (refereegranskat)abstract
- Assays are widely used for detection of various targets, including pathogens, drugs, and toxins. Homogeneous assays are promising for the realization of point-of-care diagnostics as they do not require separation, immobilization, or washing steps. For low concentrations of target molecules, the speed and sensitivity of homogeneous assays have hitherto been limited by slow binding kinetics, time-consuming amplification steps, and the presence of a high background signal. Here, we present a homogeneous differential magnetic assay that utilizes a differential magnetic readout that eliminates previous limitations of homogeneous assays. The assay uses a gradiometer sensor configuration combined with precise microfluidic sample handling. This enables simultaneous differential measurement sample containing a synthesized Vibrio cholerae target and a negative control sample, which reduces the background signal and increases the readout speed. Very low concentrations of targets down to femtomolar levels are thus detectable without any additional amplification of the number of targets. Our homogeneous differential magnetic assay method opens new possibilities for rapid and highly sensitive diagnostics at the point of care.
|
|
