| 1. |
- Sauer, Christopher, 1993
(författare)
-
Green Aromatics: Catalytic Valorisation of bio-derived 2,5-dimethylfuran over Zeolites and Zeotypes
- 2022
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- This thesis discusses the use of biomass as a potentially green feedstock for the chemical industry in the urgent shift away from fossil resources. I elaborate on reasons why we cannot afford to burn virgin biomass for energy production, among them a variety of ecosystem services that forests and other lands provide. In addition, the utilisation of biomass should be focused on products that sequester and lock away carbon for more extended periods, e.g. timber, materials and chemicals. In particular, biomass can be used as an alternative "carbon neutral" feedstock for the chemical industry, where we can preserve the already existing chemical complexity in the bio-based molecules. One example is the upgrading of furans to benzene, toluene and xylene (BTX) aromatics with the help of zeolite catalysis. These aromatics are important commodity chemicals, where the shift to a bio-based resource could make use of already existing knowledge, catalyst and production infrastructure. However, research is necessary to understand these new feedstock molecules and their interaction with the catalysts and to enable the design of applicable catalysts. In order to study the interaction of the furans, in particular 2,5-dimethylfuran (2,5-dmf), I describe and discuss the development of an analytical methodology that utilises infrared spectroscopy and mass spectrometry for the on-line identification and quantification of product molecules during catalytic reactions. This on-line analysis method is then applied to the catalytic conversion of 2,5-dmf to aromatics over a range of zeolite and zeotype catalysts. In-depth studies with ammonia as a probe molecule of the catalytic active acid sites, as well as temperature programmed experiments with ammonia and 2,5-dmf give insights into product distribution, selectivity changes and deactivation of the catalyst. For example, olefins and aromatics are initially preferred products, while with increasing time on stream, the isomerisation of 2,5-dmf becomes dominant. The incorporation of Ga into the zeotype framework, resulting in a Ga-Silicate, shows how targeted catalyst design can increase overall aromatics production. This catalyst is also suitable for selective isomerisation of 2,5-dmf to 2,4-dimethylfuran, which has a rare substitution pattern. Finally, itwas found that the most valuable of BTX, p -xylene, can be produced more selectively when 2,5-dmf is pre-adsorbed onto zeolite ZSM-5 and then released during a temperature programmed product desorption.
|
|
| 2. |
- Wojas, Natalia
(författare)
-
The dynamic surface nature of calcite and its role in determining the adsorptive stability toward hydrophobizing carboxylic fatty acids
- 2021
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Calcium carbonate has attracted a lot of interest over the centuries. Nowadays, mainly as mineral pigment and filler, it has a wide use in technological applications ranging from paper, construction, polymers, and environmental solutions to consumer goods. Amongst these uses, the filler pigment is required to display either hydrophilicity (for applications in aqueous colloidal systems, including, for example, in paper and emulsion paints), or, in contrast, oleophilicity (for applications in contact with oil-based systems, such as plastics and volatile solvent-containing sealants). To achieve oleophilicity, and resulting hydrophobicity, the filler is surface treated, typically using carboxylic fatty acids. In this thesis, effects of humidity and fatty carboxylic acids vapor on CaCO3 surface wettability and nanomechanical properties were studied, with the aim to gain knowledge on layer packing density and order, as well as resistance to water exposure and mechanical wear. A better understanding of the dynamic nature of the calcite surface presented in this work allows the industry to increase sustainable control over materials production and storage. First, a setup combining an atomic force microscope (AFM) with a humidifier was used to map nanomechanical properties of growing surface domains (hydrated form of CaCO3) formed by ion dissolution, diffusion, and redeposition, a process that is not reversible upon drying. Secondly, AFM and contact angle goniometer measurements showed that the stability of the calcite surface improves with increasing carboxylic acid chain length (C2 to C18). Meanwhile, X-ray photoelectron spectroscopy and vibrational sum frequency spectroscopy techniques demonstrated that a coherent layer with maximum packing density of carboxylate and carboxylic acid species was achieved with the use of stearic acid (C18) with high enough vapor pressure and exposure time. The AFM images successfully visualized that a complete C18 monolayer is capable of countering nano-wear of the calcite surface despite the humidity (under the range of loads investigated in this work) and the layer has self-healing properties, while calcite displayed high abrasive wear. Further, when calcite coated by a highly packed monolayer of C18 was covered with a water droplet, a large contact angle hysteresis resulted in a coffee ring effect (CRE). That is leading to formation of hillocks at the contact line consisting of dissolved fatty carboxylic acid and possibly calcium bicarbonate Ca(HCO3)2 molecules transported from the bare calcite region that also is created next to the droplet edge. Interestingly, C18 coated calcite remained considerably more stable in the case where a water droplet saturated with octanoic acid was used instead of water; thus, it was concluded that the CRE can be contained via reduction of the liquid surface tension and contact angle hysteresis.
|
|
| 3. |
|
|
| 4. |
- Le Breton, Michael, 1986, et al.
(författare)
-
Application of a FIGAERO ToF CIMS for on-line characterization of real-world fresh and aged particle emissions from buses
- 2019
-
Ingår i: Aerosol Science and Technology. - : Informa UK Limited. - 0278-6826 .- 1521-7388. ; 53:3, s. 244-259
-
Tidskriftsartikel (refereegranskat)abstract
- © 2019, © 2019 The Author(s). Published with license by Taylor & Francis Group, LLC. On-line chemical characterization of real-world particle emissions from 13 transit buses was performed using a chemical ionization mass spectrometer (CIMS) equipped with a filter inlet for gases and aerosols (FIGAERO). In addition to the fresh emissions the emissions were artificially aged using a potential aerosol mass reactor (Go:PAM). The buses studied were running on different fuel types (diesel, compressed natural gas, and rapeseed methyl ester) and exhaust after-treatment systems (selective catalytic reduction (SCR), exhaust gas recirculation (EGR), and a three-way catalyst). When evaluating emissions from passing exhaust plumes using the FIGAERO ToF-CIMS, two technical features were highlighted from this work, the use of high mass calibrants and the factor enhancement method to be able to filter important compounds from mass spectra including hundreds of species. Here, acetate was used as the reagent ion to enable detection of highly oxygenated species in the exhaust particle emissions with potential high toxicity and/or secondary organic aerosol formation (SOA) potential. The acetate ionization scheme accounted for 4% to 46% of the total emitted particulate mass through identification of 61 species in the spectra. For aged emission the various fuel types provided overlapping species that could explain up to 19% of the aged emissions. This is hypothesized to come from the oxidation of engine lubrication oil, thus a common source for various fuels which was further supported by laboratory measurements. Specific markers from the SCR technology, such as urea oxidation products and further byproducts from hydrolysis were identified and attributed to reactions of isocyanic acid.
|
|
| 5. |
- Hosseini, Seyedehsan, 1994
(författare)
-
Additive-Driven Improvements in Interfacial Properties and Processing of TMP-Polymer Composites
- 2023
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Efforts to address environmental concerns have resulted in new regulations designed to plan the reduction of plastic and synthetic polymer usage, necessitating the search for sustainable natural alternatives with comparable cost-effectiveness and mechanical performance. Thermomechanical pulp (TMP) fibres are one of the most affordable natural fibres that have no chemical refining in production, production have a high yield of 90-98% and TMP fibres have been demonstrated to improve the mechanical characteristics (strength, stiffness and toughness) of wood-polymer composites (WPCs) compared to the pure polymer. The integration of TMP fibres with non-polar synthetic polymers remains a challenge due to surface polarity differences. This PhD thesis aims to ease the processing of TMP fibre composites through the incorporation of additives. The hypothesis posits that incorporating magnesium stearate (MgSt), molybdenum disulfide (MoS2) and alkyl ketene dimer (AKD) as additives in TMP composites will enhance interfacial properties, resulting in improved processability and flow behaviour at high temperatures. MoS2 is known for its interaction with lignin, which exists in TMP and MgSt is recognised for its ability to improve flow in pharmaceutical processing when combined with cellulose, also a component of TMP. AKD modifies the hydrophilic properties of lignocellulosic surfaces. The experimental work explores the effect of these additives on the properties of TMP composites of ethylene acrylic acid copolymer (EAA) and polypropylene (PP) matrices. The dynamic mechanical analysis (DMA) and mechanical analysis results reveal that MoS2 exhibits superior interaction with TMP fibres, yielding enhanced interfacial properties compared to MgSt in between EAA and TMP fibres. Rheological studies elucidate the transition from a fluid-like state to a network-like structure upon the incorporation of TMP into the PP matrix. The incorporation of AKD with C18 reduces the viscosity of TMP-PP composites and PP itself, and, as determined through theoretical Hansen solubility parameter (HSP) calculations, increases compatibility between cellulose in TMP fibres and PP. The addition of AKD influences both the colour (lighter) and shape (smoother surface) of the extrudate filaments in the TMP-PP composites, indicative of improved processing. In addition, frictional analysis demonstrates the reduction of the coefficient of friction (COF) between metal and TMP fibre by MgSt and AKD treatments.
|
|
| 6. |
- Hedlund, Artur, et al.
(författare)
-
Microstructures of cellulose coagulated in water and alcohols from 1-ethyl-3-methylimidazolium acetate : contrasting coagulation mechanisms
- 2019
-
Ingår i: Cellulose. - : Springer Science and Business Media LLC. - 0969-0239 .- 1572-882X. ; 26:3, s. 1545-1563
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract: Coagulation of cellulose solutions is a process whereby many useful materials with variable microstructures and properties can be produced. This study investigates the complexity of the phase separation that generates the structural heterogeneity of such materials. The ionic liquid, 1-ethyl-3-methylimidazolium acetate ([C2mim][OAc]), and a co-solvent, dimethylsulfoxide (DMSO), are used to dissolve microcrystalline cellulose in concentrations from 5 to 25 wt%. The solutions are coagulated in water or 2-propanol (2PrOH). The coagulated material is then washed and solvent exchanged (water → 2PrOH → butanone → cyclohexane) in order to preserve the generated microstructures upon subsequent drying before analysis. Sweep electron microscopy images of 50 k magnification reveal open-pore fibrillar structures. The crystalline constituents of those fibrils are estimated using wide-angle X-ray spectroscopy and specific surface area data. It is found that the crystalline order or crystallite size is reduced by an increase in cellulose concentration, by the use of the co-solvent DMSO, or by the use of 2PrOH instead of water as the coagulant. Because previous theories cannot explain these trends, an alternative explanation is presented here focused on solid–liquid versus liquid–liquid phase separations. Graphical abstract: [Figure not available: see fulltext.].
|
|
| 7. |
- Kosaraju, Sravya, 1983
(författare)
-
A review of the importance of recycling lithium-ion batteries for lithium, in view of impending electric vehicle industry
- 2012
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- Automobile electrification is one the technological developments, that will commence an earth friendly transport system, by mitigating emissions and hopefully lead to a less fossil fuel dependent society. With commercial success attained by models like Nissan’s leaf and Chevy’s Volt, the consumer market looks promising to assimilate vehicle electrification. At present these technologies include HEVs (hybrid electric vehicles), PHEVs (plug-in hybrid electric vehicles), EVs (complete electric vehicles).A closer look at these technologies will lead us to one of the crucial components of electric vehicles, the “batteries”. This component decides one of the key performance factors which is the energy storage and usage, which means it is the basis for public acceptability.The lithium-ion battery chemistries are chosen to fulfill this requirement. Although lithium constitutes of a small fraction of the complete battery weight, still its contin-ued availability in future is debated among many resource analysts.
|
|
| 8. |
- Sörensen, Malin H., et al.
(författare)
-
Improved enzymatic activity of Thermomyces lanuginosus lipase immobilized in a hydrophobic particulate
- 2010
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier Inc.. - 0021-9797 .- 1095-7103. ; 343:1, s. 359-365
-
Tidskriftsartikel (refereegranskat)abstract
- Lipase from Thermomyces lanuginosus has been immobilized within particulate mesoporous silica carriers, with either hydrophilic or hydrophobic supporting surfaces, produced by the newly developed emulsion and solvent evaporation (ESE) method. The Michaelis-Menten model was used to calculate the parameters related to the enzymatic activity of lipase i.e. the turnover number, kcat, and the specific activity. The specific activity was improved by immobilization of lipase onto the hydrophobic support, compared to lipase immobilized onto the hydrophilic support and lipase free in solution. The enhanced enzymatic activity of lipase onto a hydrophobic support was attributed to interfacial activation of the Thermomyces lanuginosus lipase when it is attached to a hydrophobic surface and a reduced denaturation. Confocal scanning laser microscopy (CLSM) studies, of fluorescently tagged lipase, showed that leakage of the lipase from the mesoporous particles was limited to an initial period of only a few hours. Both the rate and the amount of lipase leached were reduced when the lipase was immobilized onto the hydrophobic support.
|
|
| 9. |
- Berastegui, Pedro, et al.
(författare)
-
Electrochemical reactions of AgFeO2 as negative electrode in Li- and Na-ion batteries
- 2018
-
Ingår i: Journal of Power Sources. - : Elsevier. - 0378-7753 .- 1873-2755. ; 401, s. 386-396
-
Tidskriftsartikel (refereegranskat)abstract
- AgFeO2 nanoparticles synthesized via precipitation at room temperature are investigated in Li- and Na-ion cells through electrode coatings with an alginate binder. The electrochemical reactions of AgFeO2 with Li+ and Na+ions, as well as its role as alternative negative electrode in these cell systems are carefully evaluated. Initial Li uptake causes irreversible amorphization of the AgFeO2 structure with concomitant formation of Ag0 nanoparticles. Further Li incorporation results in conversion into Fe0 nanoparticles and Li2O, together with Li-alloying of these Ag0 clusters. Similar mechanisms are also found upon Na uptake, although such processes are hindered by overpotentials, the capacity and reversibility of the reactions with Na+ ions being not comparablewith those of their Li+ counterparts. The behaviour of AgFeO2 at low potentials vs. Li+/Li displays a synergic pseudo-capacitive charge storage overlapping Li-Ag alloying/de-alloying. This feature is exploited in full cells having deeply lithiated AgFeO2 and LiFePO4 as negative and positive electrodes, respectively. These environmentally friendly iron-based full cells exhibit attractive cycle performances with ≈80% capacity retention after 1000 cycles without any electrolyte additive, average round trip efficiency of ≈89% and operational voltage of 3.0 V combined with built-in pseudo-capacitive characteristics that enable high cycling rates up to≈25C.
|
|
| 10. |
- Hosseini, Seyedehsan, 1994, et al.
(författare)
-
Alkyl ketene dimer modification of thermomechanical pulp promotes processability with polypropylene
- 2024
-
Ingår i: Polymer Composites. - 1548-0569 .- 0272-8397. ; 45:1, s. 825-835
-
Tidskriftsartikel (refereegranskat)abstract
- Alkyl ketene dimers (AKDs) are known to efficiently react with cellulose with a dual polarity in their structure: a polar component and a nonpolar component. AKD of three different carbon chain lengths, 4, 10, and 16 carbons have been synthesized, and thermomechanical pulp (TMP) fibers were modified by them. The modification of TMP fibers with AKD resulted in an increased water contact angle, showing the presence of the AKDs on the TMP fibers and a new carbonyl peak in the IR spectra, suggesting modification of the TMP fibers with AKD groups. Calculating the Hansen solubility parameters of AKD and AKD conjugated to TMP in polypropylene (PP) indicates improved compatibility, especially of longer chain AKD and TMP AKD. The rheological studies of the composites showed that the AKD with the longest carbon chain decreases the melt viscosity of the PP-TMP-AKD composite, which combined with the shape and the color of the extruded composite filaments indicates improved flow properties and reduced stress build up during processing. The research findings demonstrate the ability of AKD to enhance the dispersibility and compatibility of natural fibers with PP.
|
|
