| 1. |
- Sun, Bing, et al.
(författare)
-
Ion transport in polycarbonate based solid polymer electrolytes : experimental and computational investigations
- 2016
-
Ingår i: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 18:14, s. 9504-9513
-
Tidskriftsartikel (refereegranskat)abstract
- Among the alternative host materials for solid polymer electrolytes (SPEs), polycarbonates have recently shown promising functionality in all-solid-state lithium batteries from ambient to elevated temperatures. While the computational and experimental investigations of ion conduction in conventional polyethers have been extensive, the ion transport in polycarbonates has been much less studied. The present work investigates the ionic transport behavior in SPEs based on poly(trimethylene carbonate) (PTMC) and its co-polymer with epsilon-caprolactone (CL) via both experimental and computational approaches. FTIR spectra indicated a preferential local coordination between Li+ and ester carbonyl oxygen atoms in the P(TMC20CL80) co-polymer SPE. Diffusion NMR revealed that the co-polymer SPE also displays higher ion mobilities than PTMC. For both systems, locally oriented polymer domains, a few hundred nanometers in size and with limited connections between them, were inferred from the NMR spin relaxation and diffusion data. Potentiostatic polarization experiments revealed notably higher cationic transference numbers in the polycarbonate based SPEs as compared to conventional polyether based SPEs. In addition, MD simulations provided atomic-scale insight into the structure-dynamics properties, including confirmation of a preferential Li+-carbonyl oxygen atom coordination, with a preference in coordination to the ester based monomers. A coupling of the Li-ion dynamics to the polymer chain dynamics was indicated by both simulations and experiments.
|
|
| 2. |
- Zadin, Vahur, et al.
(författare)
-
Finite element modelling of ion transport in the electrolyte of a 3D-microbattery
- 2011
-
Ingår i: Solid State Ionics. - : Elsevier BV. - 0167-2738 .- 1872-7689. ; 192:1, s. 279-283
-
Tidskriftsartikel (refereegranskat)abstract
- A mathematical model describing ionic transport in a 3D-microbattery (3D-MB) electrolyte is developed here using finite element methodology. The model is then exploited to study a 3D-MB based on an interdigitated plate ("trench") architecture for a 10 pm-thick electrolyte layer separating 10 mu m-thick graphite anode and LiCoO(2) cathode plates. The effect of varying plate length, end-shape and electronic conductivity is also modelled. It is shown that the 3D-MB architecture gives rise to qualitatively non-uniform current densities, leading to sub-optimal surface utilization. This can, in turn, be optimized by varying electrode geometries and/or material properties.
|
|
| 3. |
- Chien, Yu-Chuan, 1990-, et al.
(författare)
-
Rapid determination of solid-state diffusion coefficients in Li-based batteries via intermittent current interruption method
- 2023
-
Ingår i: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- The galvanostatic intermittent titration technique (GITT) is considered the go-to method for determining the Li+ diffusion coefficients in insertion electrode materials. However, GITT-based methods are either time-consuming, prone to analysis pitfalls or require sophisticated interpretation models. Here, we propose the intermittent current interruption (ICI) method as a reliable, accurate and faster alternative to GITT-based methods. Using Fick’s laws, we prove that the ICI method renders the same information as the GITT within a certain duration of time since the current interruption. Via experimental measurements, we also demonstrate that the results from ICI and GITT methods match where the assumption of semi-infinite diffusion applies. Moreover, the benefit of the non-disruptive ICI method to operando materials characterization is exhibited by correlating the continuously monitored diffusion coefficient of Li+ in a LiNi0.8Mn0.1Co0.1O2-based electrode to its structural changes captured by operando X-ray diffraction measurements.
|
|
| 4. |
- Roberts, Matthew, et al.
(författare)
-
3D lithium ion batteries-from fundamentals to fabrication
- 2011
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 0959-9428 .- 1364-5501. ; 21:27, s. 9876-9890
-
Tidskriftsartikel (refereegranskat)abstract
- 3D microbatteries are proposed as a step change in the energy and power per footprint of surface mountable rechargeable batteries for microelectromechanical systems (MEMS) and other small electronic devices. Within a battery electrode, a 3D nanoarchitecture gives mesoporosity, increasing power by reducing the length of the diffusion path; in the separator region it can form the basis of a robust but porous solid, isolating the electrodes and immobilising an otherwise fluid electrolyte. 3D microarchitecture of the whole cell allows fabrication of interdigitated or interpenetrating networks that minimise the ionic path length between the electrodes in a thick cell. This article outlines the design principles for 3D microbatteries and estimates the geometrical and physical requirements of the materials. It then gives selected examples of recent progress in the techniques available for fabrication of 3D battery structures by successive deposition of electrodes, electrolytes and current collectors onto microstructured substrates by self-assembly methods.
|
|
| 5. |
- Ebadi, Mahsa, et al.
(författare)
-
Insights into the Li-Metal/Organic Carbonate Interfacial Chemistry by Combined First-Principles Theory and X-ray Photoelectron Spectroscopy
- 2019
-
Ingår i: The Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 123:1, s. 347-355
-
Tidskriftsartikel (refereegranskat)abstract
- X-ray photoelectron spectroscopy (XPS) is a widely used technique to study surfaces and interfaces. In complex chemical systems, however, interpretation of the XPS results and peak assignments is not straightforward. This is not least true for Li-batteries, where XPS yet remains a standard technique for interface characterization. In this work, a combined density functional theory (DFT) and experimental XPS study is carried out to obtain the C 1s and O 1s core-level binding energies of organic carbonate molecules on the surface of Li metal. Decomposition of organic carbonates is frequently encountered in electrochemical cells employing this electrode, contributing to the build up of a complex solid electrolyte interphase (SEI). The goal in this current study is to identify the XPS fingerprints of the formed compounds, degradation pathways, and thereby the early formation stages of the SEI. The contribution of partial atomic charges on the core-ionized atoms and the electrostatic potential due to the surrounding atoms on the core-level binding energies, which is decisive for interpretation of the XPS spectra, are addressed based on the DFT calculations. The results display strong correlations between these two terms and the binding energies, whereas electrostatic potential is found to be the dominating factor. The organic carbonate molecules, decomposed at the surface of the Li metal, are considered based on two different decomposition pathways. The trends of calculated binding energies for products from ethereal carbon-ethereal oxygen bond cleavage in the organic carbonates are better supported when compared to the experimental XPS results.
|
|
| 6. |
- Ebadi, Mahsa, et al.
(författare)
-
Modelling the Polymer Electrolyte/Li-Metal Interface by Molecular Dynamics simulations
- 2017
-
Ingår i: Electrochimica Acta. - : Pergamon-Elsevier. - 0013-4686 .- 1873-3859. ; 234, s. 43-51
-
Tidskriftsartikel (refereegranskat)abstract
- Solid polymer electrolytes are considered promising candidates for application in Li-metal batteries due to their comparatively high mechanical strength, which can prevent dendrite formation. In this study, we have performed Molecular Dynamics simulations to investigate structural and dynamical properties of a common polymer electrolyte, poly(ethylene oxide) (PEO) doped with LiTFSI salt in the presence of a Li metal surface. Both a physical (solid wall) and a chemical (slab) model of the Li (100) surface have been applied, and the results are also compared with a model of the bulk electrolyte. The average coordination numbers for oxygen atoms around the Li ions are ca. 6 for all investigated systems. However, the calculated Radial Distribution Functions (RDFs) for Li+-(OPEO) and Li+-(OTFSI) show sharper peaks for the Li slab model, indicating a more well-defined coordination sphere for Li+ in this system. This is clearly a surface effect, since the RDF for Li+ in the interface region exhibits sharper peaks than in the bulk region of the same system. The simulations also display a high accumulation of TFSI anions and Li+ cations close to interface regions. This also leads to slower dynamics of the ionic transport in the systems, which have a Li-metal surface present, as seen from the calculated mean-square-displacement functions. The accumulation of ions close to the surface is thus likely to induce a polarization close to the electrode.
|
|
| 7. |
- Marchiori, Cleber, et al.
(författare)
-
Understanding the Electrochemical Stability Window of Polymer Electrolytes in Solid-State Batteries from Atomic-Scale Modeling : The Role of Li-Ion Salts
- 2020
-
Ingår i: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 32:17, s. 7237-7246
-
Tidskriftsartikel (refereegranskat)abstract
- After decades of development in Li-ion batteries, solid polymer electrolytes (SPEs) are currently experiencing a renaissance as a promising category of materials to be used in all-solid-state batteries. However, a fundamental understanding of their electrochemical properties in the battery environment is still lacking, which in turn limits the implementation of this prospective solution. With the aim of bridging this knowledge gap, we have assessed, through first-principles thermodynamics calculations based on atomic-scale modeling, the electrochemistry of a range of relevant polymer electrolyte hosts in their pristine form and also when doped with commonly used Li-ion salts. A significant change of the electrochemical stability window upon formation of the polymer/salt complexes was found. The mechanisms of the reduction and oxidation reactions are unveiled and correlated to the electronic structures and molecular structural relaxations. In the reduction process, the salt anions control the potentials due to bond cleavage that stabilize the reduced state. In the oxidation process, the mechanism is different with the charge being stabilized either on the polymer or on the salt anion depending on the complex formed. This assessment of the electrochemical stability of the polymer/salt complexes could serve as a guide for electrolyte design in SPE-based all-solid-state batteries.
|
|
| 8. |
- Tan, Semra, et al.
(författare)
-
Poly(ether amine) and cross-linked poly(propylene oxide) diacrylate thin-film polymer electrolyte for 3D-microbatteries
- 2010
-
Ingår i: Electrochemistry communications. - : Elsevier BV. - 1388-2481 .- 1873-1902. ; 12:11, s. 1498-1500
-
Tidskriftsartikel (refereegranskat)abstract
- This paper presents a novel thin-film electrolyte of a 2:1 blend of polyetheramine (glyceryl poly(oxypropylene)) and cross-linked oligomeric poly(propylene oxide) diacrylate with LiTFSI. The polyetheramine acts as a surfactant, and can thereby be applied as a conformal coating on complex surfaces-here demonstrated for porous LiFePO4 cathodes-making it useful for 3D-microbatteries. The poly(propylene oxide) diacrylate blends with the surfactant and is easily UV cross-linked, thereby ensuring good mechanical stability. Electrolytes, ∼ 2 μm thick, were casted onto LiFePO 4 cathodes and cycled against metallic lithium, displaying stable discharge capacities of ∼ 8 mAh/g at room temperature and ∼ 120 mAh/g at 60 °C. The electrolyte showed conductivities of 3.45 × 10 - 6 and 5.80 × 10- 5 S cm- 1 at room temperature and 60 °C, respectively.
|
|
| 9. |
- Mogensen, Ronnie, et al.
(författare)
-
Solubility of the Solid Electrolyte Interphase (SEI) in Sodium Ion Batteries
- 2016
-
Ingår i: ACS Energy Letters. - : American Chemical Society (ACS). - 2380-8195. ; 1:6, s. 1173-1178
-
Tidskriftsartikel (refereegranskat)abstract
- It is often stated that formation of a functional solid electrolyte interphase (SEI) in sodium ion batteries is hampered by the higher solubility of SEI components such as sodium salts in comparison to the lithium analogues. In order to investigate these phenomena, SEI formation and functionality, as well as cell self-discharge, are studied for the sodium ion system with comparative experiments on the equivalent lithium ion system. By conducting a set of experiments on carbonaceous anodes, the impact of SEI dissolution is tested. The results show that the SEI layer in sodium ion cells is inferior to that in lithium ion counterparts with regards to self-discharge; sodium cells show a loss in capacity at a dramatic rate as compared to the lithium counterparts when they are stored at sodiated and lithiated states, respectively, for a long time with no external applied current or potential. Also, synchrotron-based hard X-ray photoelectron spectroscopy measurements indicate that the major factor leading to increased self-discharge is dissolution of significant parts of the sodium-based SEI. Furthermore, the influence of fluoroethylene carbonate (FEC) electrolyte additive on self-discharge is tested as part of the work.
|
|
| 10. |
- Kotronia, Antonia, et al.
(författare)
-
Nature of the Cathode–Electrolyte Interface in Highly Concentrated Electrolytes Used in Graphite Dual-Ion Batteries
- 2021
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 13:3, s. 3867-3880
-
Tidskriftsartikel (refereegranskat)abstract
- Dual-ion batteries (DIBs) generally operate beyond 4.7 V vs Li+/Li0 and rely on the intercalation of both cations and anions in graphite electrodes. Major challenges facing the development of DIBs are linked to electrolyte decomposition at the cathode–electrolyte interface (CEI), graphite exfoliation, and corrosion of Al current collectors. In this work, X-ray photoelectron spectroscopy (XPS) is employed to gain a broad understanding of the nature and dynamics of the CEI built on anion-intercalated graphite cycled both in highly concentrated electrolytes (HCEs) of common lithium salts (LiPF6, LiFSI, and LiTFSI) in carbonate solvents and in a typical ionic liquid. Though Al metal current collectors were adequately stable in all HCEs, the Coulombic efficiency was substantially higher for HCEs based on LiFSI and LiTFSI salts. Specific capacities ranging from 80 to 100 mAh g–1 were achieved with a Coulombic efficiency above 90% over extended cycling, but cells with LiPF6-based electrolytes were characterized by <70% Coulombic efficiency and specific capacities of merely ca. 60 mAh g–1. The poor performance in LiPF6-containing electrolytes is indicative of the continual buildup of decomposition products at the interface due to oxidation, forming a thick interfacial layer rich in LixPFy, POxFy, LixPOyFz, and organic carbonates as evidenced by XPS. In contrast, insights from XPS analyses suggested that anion intercalation and deintercalation processes in the range from 3 to 5.1 V give rise to scant or extremely thin surface layers on graphite electrodes cycled in LiFSI- and LiTFSI-containing HCEs, even allowing for probing anions intercalated in the near-surface bulk. In addition, ex situ Raman, SEM and TEM characterizations revealed the presence of a thick coating on graphite particles cycled in LiPF6-based electrolytes regardless of salt concentration, while hardly any surface film was observed in the case of concentrated LiFSI and LiTFSI electrolytes.
|
|
