| 1. |
- Diamond, Miriam, et al.
(författare)
-
Exploring the planetary boundary for chemical pollution
- 2015
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 78, s. 8-15
-
Forskningsöversikt (refereegranskat)abstract
- Rockström et al. (2009a, 2009b) have warned that humanity must reduce anthropogenic impacts defined by nine planetary boundaries if “unacceptable global change” is to be avoided. Chemical pollution was identified as one of those boundaries for which continued impacts could erode the resilience of ecosystems and humanity. The central concept of the planetary boundary (or boundaries) for chemical pollution (PBCP or PBCPs) is that the Earth has a finite assimilative capacity for chemical pollution, which includes persistent, as well as readily degradable chemicals released at local to regional scales, which in aggregate threaten ecosystem and human viability. The PBCP allows humanity to explicitly address the increasingly global aspects of chemical pollution throughout a chemical's life cycle and the need for a global response of internationally coordinated control measures. We submit that sufficient evidence shows stresses on ecosystem and human health at local to global scales, suggesting that conditions are transgressing the safe operating space delimited by a PBCP. As such, current local to global pollution control measures are insufficient. However, while the PBCP is an important conceptual step forward, at this point single or multiple PBCPs are challenging to operationalize due to the extremely large number of commercial chemicals or mixtures of chemicals that cause myriad adverse effects to innumerable species and ecosystems, and the complex linkages between emissions, environmental concentrations, exposures and adverse effects. As well, the normative nature of a PBCP presents challenges of negotiating pollution limits amongst societal groups with differing viewpoints. Thus, a combination of approaches is recommended as follows: develop indicators of chemical pollution, for both control and response variables, that will aid in quantifying a PBCP(s) and gauging progress towards reducing chemical pollution; develop new technologies and technical and social approaches to mitigate global chemical pollution that emphasize a preventative approach; coordinate pollution control and sustainability efforts; and facilitate implementation of multiple (and potentially decentralized) control efforts involving scientists, civil society, government, non-governmental organizations and international bodies.
|
|
| 2. |
|
|
| 3. |
- Amir Heidari, Payam, 1989, et al.
(författare)
-
A state-of-the-art model for spatial and stochastic oil spill risk assessment: A case study of oil spill from a shipwreck
- 2019
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 126, s. 309-320
-
Tidskriftsartikel (refereegranskat)abstract
- Oil spills are serious environmental issues that potentially can cause adverse effects on marine ecosystems. In some marine areas, like the Baltic Sea, there is a large number of wrecks from the first half of the 20th century, and recent monitoring and field work have revealed release of oil from some of these wrecks. The risk posed by a wreck is governed by its condition, hazardous substances contained in the wreck and the state of the surrounding environment. Therefore, there is a need for a common standard method for estimating the risks associated with different wrecks. In this work a state-of-the-art model is presented for spatial and stochastic risk assessment of oil spills from wrecks, enabling a structured approach to include the complex factors affecting the risk values. A unique feature of this model is its specific focus on uncertainty, facilitating probabilistic calculation of the total risk as the integral expected sum of many possible consequences. A case study is performed in Kattegat at the entrance region to the Baltic Sea to map the risk from a wreck near Sweden. The developed model can be used for oil spill risk assessment in the marine environment all over the world.
|
|
| 4. |
- Markiewicz, Anna, 1984, et al.
(författare)
-
Generation of nano- and micro-sized organic pollutant emulsions in simulated road runoff
- 2019
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 133, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- A wide range of organic pollutants (OPs) are emitted from the road and traffic environment and transported with road runoff to receiving waters. To provide an understanding of the transport routes of OPs in the environment, an investigation was carried out with the aim to determine whether OPs are transported with nano- and microparticles in the form of emulsions. Tests were performed on simulated road runoff, using laboratory prepared mixtures of ultrapure water and specific polycyclic aromatic hydrocarbons (PAHs), alkylphenols (APs) and their ethoxylates (APEOs), phthalates, diesel oil (aliphatic hydrocarbons), with and without addition of humic acid (HA) and iron (Fe) colloids. The samples were analysed directly after mixing and after a few days of stabilisation for particle size distribution (PSD) and concentrations of particles in the size range 10 nm-100 mu m, and zeta potential> +/- 500 mV. Further, after long-term storage to achieve stabilisation, selected samples were investigated for the PSD and particle concentrations in the ranges 10 nm-2 mu m, to determine whether stable emulsions had formed. The following simulation mixtures, both mixed and stabilised, were identified as potential emulsions: diesel, APs and APEOs, diesel with APs and APEOS, phthalates, and a mixture of all OPs with and without colloids. Measurements with the Zetasizer and Nanosight instruments imply that the majority of particles in the samples were found in the nano-range of 30-660 nm respectively, and a smaller portion of particles < 28% also measured with Coulter Counter were found to be micro-sized. Higher concentrations of the smallest nanoparticles were found in the mixture of all OPs without colloids added, than in the OP mixture with colloids added. The results indicate that the addition of colloids favours the formation of larger micro-sized emulsions that may break down with time into nano-sized particles. In the mixed samples, the number of micro-sized particles decreased, while the number of nanoparticles increased; this process may also occur in road runoff transportation systems during heavy rain events. This is the first study to indicate that emulsions of OPs may be formed in road runoff, and that emulsions may act as carriers of OPs in urban stormwater.
|
|
| 5. |
- Pennington, D. W., et al.
(författare)
-
Life cycle assessment Part 2 : Current impact assessment practice
- 2004
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 30:5, s. 721-739
-
Forskningsöversikt (refereegranskat)abstract
- Providing our society with goods and services contributes to a wide range of environmental impacts. Waste generation, emissions and the consumption of resources occur at many stages in a product's life cycle-from raw material extraction, energy acquisition, production and manufacturing, use, reuse, recycling, through to ultimate disposal. These all contribute to impacts such as climate change, stratospheric ozone depletion, photooxidant formation (smog), eutrophication, acidification, toxicological stress on human health and ecosystems, the depletion of resources and noise-among others. The need exists to address these product-related contributions more holistically and in an integrated manner, providing complimentary insights to those of regulatory/process-oriented methodologies. A previous article (Part 1, Rebitzer et al., 2004) outlined how to define and model a product's life cycle in current practice, as well as the methods and tools that are available for compiling the associated waste, emissions and resource consumption data into a life cycle inventory. This article highlights how practitioners and researchers from many domains have come together to provide indicators for the different impacts attributable to products in the life cycle impact assessment (LCIA) phase of life cycle assessment (LCA).
|
|
| 6. |
- Dimitroulopoulou, S., et al.
(författare)
-
Indoor air quality guidelines from across the world : An appraisal considering energy saving, health, productivity, and comfort
- 2023
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 178
-
Tidskriftsartikel (refereegranskat)abstract
- Buildings are constructed and operated to satisfy human needs and improve quality of life. Good indoor air quality (IAQ) and thermal comfort are prerequisites for human health and well-being. For their provision, buildings often rely on heating, ventilation, and air conditioning (HVAC) systems, which may lead to higher energy consumption. This directly impacts energy efficiency goals and the linked climate change considerations. The balance between energy use, optimum IAQ and thermal comfort calls for scientifically solid and well-established limit values for exposures experienced by building occupants in indoor spaces, including homes, schools, and offices. The present paper aims to appraise limit values for selected indoor pollutants reported in the scientific literature, and to present how they are handled in international and national guidelines and standards. The pollutants include carbon dioxide (CO2), formaldehyde (CH2O), particulate matter (PM), nitrogen dioxide (NO2), carbon monoxide (CO), and radon (Rn). Furthermore, acknowledging the particularly strong impact on energy use from HVAC, ventilation, indoor temperature (T), and relative humidity (RH) are also included, as they relate to both thermal comfort and the possibilities to avoid moisture related problems, such as mould growth and proliferation of house dust mites. Examples of national regulations for these parameters are presented, both in relation to human requirements in buildings and considering aspects related to energy saving. The work is based on the Indoor Environmental Quality (IEQ) guidelines database, which spans across countries and institutions, and aids in taking steps in the direction towards a more uniform guidance for values of indoor parameters. The database is coordinated by the Scientific and Technical Committee (STC) 34, as part of ISIAQ, the International Society of Indoor Air Quality and Climate.
|
|
| 7. |
- Järlskog, Ida, 1991, et al.
(författare)
-
Concentrations of tire wear microplastics and other traffic-derived non-exhaust particles in the road environment
- 2022
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 170
-
Tidskriftsartikel (refereegranskat)abstract
- Tire wear particles (TWP) are assumed to be one of the major sources of microplastic pollution to the environment. However, many of the previously published studies are based on theoretical estimations rather than field measurements. To increase the knowledge regarding actual environmental concentrations, samples were collected and analyzed from different matrices in a rural highway environment to characterize and quantify TWP and other traffic-derived non-exhaust particles. The sampled matrices included road dust (from kerb and in-between wheeltracks), runoff (water and sediment), and air. In addition, airborne deposition was determined in a transect with increasing distance from the road. Two sieved size fractions (2–20 µm and 20–125 µm) were analyzed by automated Scanning Electron Microscopy/Energy Dispersive X-ray spectroscopy (SEM/EDX) single particle analysis and classified with a machine learning algorithm into the following subclasses: TWP, bitumen wear particles (BiWP), road markings, reflecting glass beads, metals, minerals, and biogenic/organic particles. The relative particle number concentrations (%) showed that the runoff contained the highest proportion of TWP (up to 38 %). The share of TWP in kerb samples tended to be higher than BiWP. However, a seasonal increase of BiWP was observed in coarse (20–125 µm) kerb samples during winter, most likely reflecting studded tire use. The concentration of the particle subclasses within airborne PM80-1 decreases with increasing distance from the road, evidencing road traffic as the main emission source. The results confirm that road dust and the surrounding environment contain traffic-derived microplastics in both size fractions. The finer fraction (2–20 µm) dominated (by mass, volume, and number) in all sample matrices. These particles have a high potential to be transported in water and air far away from the source and can contribute to the inhalable particle fraction (PM10) in air. This highlights the importance of including also finer particle fractions in future investigations.
|
|
| 8. |
- Kraupner, Nadine, et al.
(författare)
-
Evidence for selection of multi-resistant E. coli by hospital effluent.
- 2021
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 150, s. 106436-
-
Tidskriftsartikel (refereegranskat)abstract
- There is a risk that residues of antibiotics and other antimicrobials in hospital and municipal wastewaters could select for resistant bacteria. Still, direct experimental evidence for selection is lacking. Here, we investigated if effluent from a large Swedish hospital, as well as influent and effluent from the connected municipal wastewater treatment plant (WWTP) select for antibiotic resistant Escherichia coli in three controlled experimental setups. Exposure of sterile-filtered hospital effluent to a planktonic mix of 149 different E. coli wastewater isolates showed a strong selection of multi-resistant strains. Accordingly, exposure to a complex wastewater community selected for strains resistant to several antibiotic classes. Exposing individual strains with variable resistance patterns revealed a rapid bactericidal effect of hospital effluent on susceptible, but not multi-resistant E. coli. No selection was observed after exposure to WWTP effluent, while exposure to WWTP influent indicated a small selective effect for ceftazidime and cefadroxil resistant strains, and only in the E. coli mix assay. An analysis of commonly used antibiotics and non-antibiotic pharmaceuticals in combination with growth and resistance pattern of individual E. coli isolates suggested a possible contribution of ciprofloxacin and β-lactams to the selection by hospital effluent. However, more research is needed to clarify the contribution from different selective agents. While this study does not indicate selection by the studied WWTP effluent, there is some indications of selective effects by municipal influent on β-lactam-resistant strains. Such effects may be more pronounced in countries with higher antibiotic use than Sweden. Despite the limited antibiotic use in Sweden, the hospital effluent strongly and consistently selected for multi-resistance, indicating widespread risks. Hence, there is an urgent need for further evaluation of risks for resistance selection in hospital sewers, as well as for strategies to remove selective agents and resistant bacteria.
|
|
| 9. |
- Lai, Foon Yin
(författare)
-
A National Wastewater Monitoring Program for a better understanding of public health: A case study using the Australian Census
- 2019
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 122, s. 400-411
-
Tidskriftsartikel (refereegranskat)abstract
- Wastewater contains a large range of biological and chemical markers of human activity and exposures. Through systematic collection and analysis of these markers within wastewater samples it is possible to measure the public health of whole populations. The analysis of effluent and biosolids can also be used to understand the release of chemicals from wastewater treatment plants into the environment. Wastewater analysis and comparison with catchment specific data (e.g. demographics) however remains largely unexplored. This manuscript describes a national wastewater monitoring study that combines influent, effluent and biosolids sampling with the Australian Census. An archiving program allows estimation of per capita exposure to and consumption of chemicals, public health information, as well as per capita release of chemicals into the environment. The paper discusses the study concept, critical steps in setting up a coordinated national approach and key logistical and other considerations with a focus on lessons learnt and future applications. The unique combination of archived samples, analytical data and associated census-derived population data will provide a baseline dataset that has wide and potentially increasing applications across many disciplines that include public health, epidemiology, criminology, toxicology and sociology.
|
|
| 10. |
- Lovén, Karin, et al.
(författare)
-
Size-resolved characterization of particles >10 nm emitted to air during metal recycling
- 2023
-
Ingår i: Environment International. - : Elsevier Ltd. - 0160-4120 .- 1873-6750. ; 174
-
Tidskriftsartikel (refereegranskat)abstract
- Background: In the strive towards a circular economy, metal waste recycling is a growing industry. During the recycling process, particulate matter containing toxic and allergenic metals will be emitted to the air causing unintentional exposure to humans and environment. Objective: In this study detailed characterization of particle emissions and workplace exposures were performed, covering the full size range from 10 nm to 10 µm, during recycling of three different material flows: Waste of electrical and electronic equipment (WEEE), metal scrap, and cables. Methods: Both direct-reading instruments (minute resolution), and time-integrated filter measurements for gravimetric and chemical analysis were used. Additionally, optical sensors were applied and evaluated for long-term online monitoring of air quality in industrial settings. Results: The highest concentrations, in all particle sizes, and with respect both to particle mass and number, were measured in the WEEE flow, followed by the metal scrap flow. The number fraction of nanoparticles was high for all material flows (0.66–0.86). The most abundant metals were Fe, Al, Zn, Pb and Cu. Other elements of toxicological interest were Mn, Ba and Co. Significance: The large fraction of nanoparticles, and the fact that their chemical composition deviate from that of the coarse particles, raises questions that needs to be further addressed including toxicological implications, both for humans and for the environment. © 2023 The Authors
|
|
