| 1. |
- Diamond, Miriam, et al.
(författare)
-
Exploring the planetary boundary for chemical pollution
- 2015
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 78, s. 8-15
-
Forskningsöversikt (refereegranskat)abstract
- Rockström et al. (2009a, 2009b) have warned that humanity must reduce anthropogenic impacts defined by nine planetary boundaries if “unacceptable global change” is to be avoided. Chemical pollution was identified as one of those boundaries for which continued impacts could erode the resilience of ecosystems and humanity. The central concept of the planetary boundary (or boundaries) for chemical pollution (PBCP or PBCPs) is that the Earth has a finite assimilative capacity for chemical pollution, which includes persistent, as well as readily degradable chemicals released at local to regional scales, which in aggregate threaten ecosystem and human viability. The PBCP allows humanity to explicitly address the increasingly global aspects of chemical pollution throughout a chemical's life cycle and the need for a global response of internationally coordinated control measures. We submit that sufficient evidence shows stresses on ecosystem and human health at local to global scales, suggesting that conditions are transgressing the safe operating space delimited by a PBCP. As such, current local to global pollution control measures are insufficient. However, while the PBCP is an important conceptual step forward, at this point single or multiple PBCPs are challenging to operationalize due to the extremely large number of commercial chemicals or mixtures of chemicals that cause myriad adverse effects to innumerable species and ecosystems, and the complex linkages between emissions, environmental concentrations, exposures and adverse effects. As well, the normative nature of a PBCP presents challenges of negotiating pollution limits amongst societal groups with differing viewpoints. Thus, a combination of approaches is recommended as follows: develop indicators of chemical pollution, for both control and response variables, that will aid in quantifying a PBCP(s) and gauging progress towards reducing chemical pollution; develop new technologies and technical and social approaches to mitigate global chemical pollution that emphasize a preventative approach; coordinate pollution control and sustainability efforts; and facilitate implementation of multiple (and potentially decentralized) control efforts involving scientists, civil society, government, non-governmental organizations and international bodies.
|
|
| 2. |
- Amir Heidari, Payam, 1989, et al.
(författare)
-
A state-of-the-art model for spatial and stochastic oil spill risk assessment: A case study of oil spill from a shipwreck
- 2019
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 126, s. 309-320
-
Tidskriftsartikel (refereegranskat)abstract
- Oil spills are serious environmental issues that potentially can cause adverse effects on marine ecosystems. In some marine areas, like the Baltic Sea, there is a large number of wrecks from the first half of the 20th century, and recent monitoring and field work have revealed release of oil from some of these wrecks. The risk posed by a wreck is governed by its condition, hazardous substances contained in the wreck and the state of the surrounding environment. Therefore, there is a need for a common standard method for estimating the risks associated with different wrecks. In this work a state-of-the-art model is presented for spatial and stochastic risk assessment of oil spills from wrecks, enabling a structured approach to include the complex factors affecting the risk values. A unique feature of this model is its specific focus on uncertainty, facilitating probabilistic calculation of the total risk as the integral expected sum of many possible consequences. A case study is performed in Kattegat at the entrance region to the Baltic Sea to map the risk from a wreck near Sweden. The developed model can be used for oil spill risk assessment in the marine environment all over the world.
|
|
| 3. |
- Markiewicz, Anna, 1984, et al.
(författare)
-
Generation of nano- and micro-sized organic pollutant emulsions in simulated road runoff
- 2019
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 133, s. 1-12
-
Tidskriftsartikel (refereegranskat)abstract
- A wide range of organic pollutants (OPs) are emitted from the road and traffic environment and transported with road runoff to receiving waters. To provide an understanding of the transport routes of OPs in the environment, an investigation was carried out with the aim to determine whether OPs are transported with nano- and microparticles in the form of emulsions. Tests were performed on simulated road runoff, using laboratory prepared mixtures of ultrapure water and specific polycyclic aromatic hydrocarbons (PAHs), alkylphenols (APs) and their ethoxylates (APEOs), phthalates, diesel oil (aliphatic hydrocarbons), with and without addition of humic acid (HA) and iron (Fe) colloids. The samples were analysed directly after mixing and after a few days of stabilisation for particle size distribution (PSD) and concentrations of particles in the size range 10 nm-100 mu m, and zeta potential> +/- 500 mV. Further, after long-term storage to achieve stabilisation, selected samples were investigated for the PSD and particle concentrations in the ranges 10 nm-2 mu m, to determine whether stable emulsions had formed. The following simulation mixtures, both mixed and stabilised, were identified as potential emulsions: diesel, APs and APEOs, diesel with APs and APEOS, phthalates, and a mixture of all OPs with and without colloids. Measurements with the Zetasizer and Nanosight instruments imply that the majority of particles in the samples were found in the nano-range of 30-660 nm respectively, and a smaller portion of particles < 28% also measured with Coulter Counter were found to be micro-sized. Higher concentrations of the smallest nanoparticles were found in the mixture of all OPs without colloids added, than in the OP mixture with colloids added. The results indicate that the addition of colloids favours the formation of larger micro-sized emulsions that may break down with time into nano-sized particles. In the mixed samples, the number of micro-sized particles decreased, while the number of nanoparticles increased; this process may also occur in road runoff transportation systems during heavy rain events. This is the first study to indicate that emulsions of OPs may be formed in road runoff, and that emulsions may act as carriers of OPs in urban stormwater.
|
|
| 4. |
- Lai, Foon Yin
(författare)
-
A National Wastewater Monitoring Program for a better understanding of public health: A case study using the Australian Census
- 2019
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120 .- 1873-6750. ; 122, s. 400-411
-
Tidskriftsartikel (refereegranskat)abstract
- Wastewater contains a large range of biological and chemical markers of human activity and exposures. Through systematic collection and analysis of these markers within wastewater samples it is possible to measure the public health of whole populations. The analysis of effluent and biosolids can also be used to understand the release of chemicals from wastewater treatment plants into the environment. Wastewater analysis and comparison with catchment specific data (e.g. demographics) however remains largely unexplored. This manuscript describes a national wastewater monitoring study that combines influent, effluent and biosolids sampling with the Australian Census. An archiving program allows estimation of per capita exposure to and consumption of chemicals, public health information, as well as per capita release of chemicals into the environment. The paper discusses the study concept, critical steps in setting up a coordinated national approach and key logistical and other considerations with a focus on lessons learnt and future applications. The unique combination of archived samples, analytical data and associated census-derived population data will provide a baseline dataset that has wide and potentially increasing applications across many disciplines that include public health, epidemiology, criminology, toxicology and sociology.
|
|
| 5. |
- Xu, Jingying, 1984-, et al.
(författare)
-
Sources and remediation techniques for mercury contaminated soil
- 2015
-
Ingår i: Environment International. - : Elsevier. - 0160-4120 .- 1873-6750. ; 74, s. 42-53
-
Forskningsöversikt (refereegranskat)abstract
- Mercury (Hg) in soils has increased by a factor of 3 to 10 in recent times mainly due to combustion of fossil fuels combined with long-range atmospheric transport processes. Other sources as chlor-alkali plants, gold mining and cement production can also be significant, at least locally. This paper summarizes the natural and anthropogenic sources that have contributed to the increase of Hg concentration in soil and reviews major remediation techniques and their applications to control soil Hg contamination. The focus is on soil washing, stabilisation/solidification, thermal treatment and biological techniques; but also the factors that influence Hg mobilisation in soil and therefore are crucial for evaluating and optimizing remediation techniques are discussed. Further research on bioremediation is encouraged and future study should focus on the implementation of different remediation techniques under field conditions.
|
|
| 6. |
- Kamali, Mohammadreza, et al.
(författare)
-
Sustainability criteria for assessing nanotechnology applicability in industrial wastewater treatment : Current status and future outlook
- 2019
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120. ; 125, s. 261-276
-
Tidskriftsartikel (refereegranskat)abstract
- Application of engineered nanomaterials for the treatment of industrial effluents and to deal with recalcitrant pollutants has been noticeably promoted in recent years. Laboratory, pilot and full-scale studies emphasize the potential of this technology to offer promising treatment options to meet the future needs for clean water resources and to comply with stringent environmental regulations. The technology is now in the stage of being transferred to the real applications. Therefore, the assessment of its performance according to sustainability criteria and their incorporation into the decision-making process is a key task to ensure that long term benefits are achieved from the nano-treatment technologies. In this study, the importance of sustainability criteria for the conventional and novel technologies for the treatment of industrial effluents was determined in a general approach assisted by a fuzzy-Delphi method. The criteria were categorized in technical, economic, environmental and social branches and the current situation of the nanotechnology regarding the criteria was critically discussed. The results indicate that the efficiency and safety are the most important parameters to make sustainable choices for the treatment of industrial effluents. Also, in addition to the need for scaling-up the nanotechnology in various stages, the study on their environmental footprint must continue in deeper scales under expected environmental conditions, in particular the synthesis of engineered nanomaterials and the development of reactors with the ability of recovery and reuse the nanomaterials. This paper will aid to select the most sustainable types of nanomaterials for the real applications and to guide the future studies in this field.
|
|
| 7. |
- Morawska, L., et al.
(författare)
-
Airborne particles in indoor environment of homes, schools, offices and aged care facilities : The main routes of exposure
- 2017
-
Ingår i: Environment International. - : Elsevier BV. - 0160-4120. ; 108, s. 75-83
-
Forskningsöversikt (refereegranskat)abstract
- It has been shown that the exposure to airborne particulate matter is one of the most significant environmental risks people face. Since indoor environment is where people spend the majority of time, in order to protect against this risk, the origin of the particles needs to be understood: do they come from indoor, outdoor sources or both? Further, this question needs to be answered separately for each of the PM mass/number size fractions, as they originate from different sources. Numerous studies have been conducted for specific indoor environments or under specific setting. Here our aim was to go beyond the specifics of individual studies, and to explore, based on pooled data from the literature, whether there are generalizable trends in routes of exposure at homes, schools and day cares, offices and aged care facilities. To do this, we quantified the overall 24 h and occupancy weighted means of PM10, PM2.5 and PN - particle number concentration. Based on this, we developed a summary of the indoor versus outdoor origin of indoor particles and compared the means to the WHO guidelines (for PM10 and PM2.5) and to the typical levels reported for urban environments (PN). We showed that the main origins of particle metrics differ from one type of indoor environment to another. For homes, outdoor air is the main origin of PM10 and PM2.5 but PN originate from indoor sources; for schools and day cares, outdoor air is the source of PN while PM10 and PM2.5 have indoor sources; and for offices, outdoor air is the source of all three particle size fractions. While each individual building is different, leading to differences in exposure and ideally necessitating its own assessment (which is very rarely done), our findings point to the existence of generalizable trends for the main types of indoor environments where people spend time, and therefore to the type of prevention measures which need to be considered in general for these environments.
|
|
