| 1. |
- Castenfors, K., et al.
(författare)
-
Crisis communication : learning from the 1998 LPG near miss in Stockholm
- 2001
-
Ingår i: Journal of Hazardous Materials. - 0304-3894 .- 1873-3336. ; 88:2-3, s. 235-254
-
Tidskriftsartikel (refereegranskat)abstract
- The authors examine current trends in urban risks and resilience in relation to hazardous material transports in general, and crisis communication and the Stockholm liquefied petroleum gas (LPG) near miss in 1998 in particular The article discusses how current dynamics affecting urban areas, such as the decay in terms of increased condensation and limited expansion alternatives combined with industry site contamination and transports of hazardous materials on old worn-out physical infrastructure, work together to produce high-risk factors and increase urban vulnerability in large parts of the world today. Crisis communication takes a particularly pronounced role in the article as challenges in communication and confidence maintenance under conditions of information uncertainty and limited information control are explored. The LPG near miss case illustrates a Swedish case of urban risk and the tight coupling to hazardous material transports. The case also serves as a current example of Swedish resilience and lack of preparedness in urban crises, with particular observations and lessons learned in regards to crisis communication.
|
|
| 2. |
- Cui, Jirang, et al.
(författare)
-
Mechanical recycling of waste electric and electronic equipment : a review
- 2003
-
Ingår i: Journal of Hazardous Materials. - 0304-3894 .- 1873-3336. ; 99:3, s. 243-263
-
Tidskriftsartikel (refereegranskat)abstract
- The production of electric and electronic equipment (EEE) is one of the fastest growing areas. This development has resulted in an increase of waste electric and electronic equipment (WEEE). In view of the environmental problems involved in the management of WEEE, many counties and organizations have drafted national legislation to improve the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal. Recycling of WEEE is an important subject not only from the point of waste treatment but also from the recovery of valuable materials.WEEE is diverse and complex, in terms of materials and components makeup as well as the original equipment's manufacturing processes. Characterization of this waste stream is of paramount importance for developing a cost-effective and environmentally friendly recycling system. In this paper, the physical and particle properties of WEEE are presented. Selective disassembly, targeting on singling out hazardous and/or valuable components, is an indispensable process in the practice of recycling of WEEE. Disassembly process planning and innovation of disassembly facilities are most active research areas. Mechanical/physical processing, based on the characterization of WEEE, provides an alternative means of recovering valuable materials. Mechanical processes, such as screening, shape separation, magnetic separation, Eddy current separation, electrostatic separation, and jigging have been widely utilized in recycling industry. However, recycling of WEEE is only beginning.For maximum separation of materials, WEEE should be shredded to small, even fine particles, generally below 5 or 10 mm. Therefore, a discussion of mechanical separation processes for fine particles is highlighted in this paper.Consumer electronic equipment (brown goods), such as television sets, video recorders, are most common. It is very costly to perform manual dismantling of those products, due to the fact that brown goods contain very low-grade precious metals and copper. It is expected that a mechanical recycling process will be developed for the upgrading of low metal content scraps.
|
|
| 3. |
- Fiedler, Heidelore, 1953-, et al.
(författare)
-
Case study of a highly dioxin contaminated sports field : Environmental risk assessment and human exposure
- 1995
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 43:3, s. 217-227
-
Tidskriftsartikel (refereegranskat)abstract
- Copper slag, containing high levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) was used as covering material of a community sports field. This led to a contamination up to 40 000 fold in comparison to background concentrations in soils. Levels and patterns of dioxins found in sediments of a nearby river proved a translocation of contaminated copper slag, while slightly elevated dioxin levels found in soil from nearby house gardens could not be attributed to the sports field as the source of dioxins.The annual flux of dioxins and furans to the environment was estimated using worst-case assumptions and the potential exposure of humans was deduced. Calculations of possible PCDD/PCDF-fluxes to the environment showed that only one major process - wind erosion - may have contributed to more than 90% of the total dioxin flux from the contaminated site to the surroundings, Based on PCDD/PCDF-exposure pathways for humans it was concluded that the PCDD/PCDF-content of the copper slag of the sports field did not pose a health hazard to athletes nor to the residents living in the neighbourhood.
|
|
| 4. |
- Acevedo, F., et al.
(författare)
-
Degradation of polycyclic aromatic hydrocarbons by the Chilean white-rot fungus Anthracophyllum discolor
- 2011
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 185:1, s. 212-219
-
Tidskriftsartikel (refereegranskat)abstract
- The degradation of three- and four-ring polycyclic aromatic hydrocarbons (PAHs) in Kirk medium by Anthracophyllum discolor, a white-rot fungus isolated from the forest of southern Chile, was evaluated. In addition, the removal efficiency of three-, four- and five-ring PAHs in contaminated soil bioaugmented with A. discolor in the absence and presence of indigenous soil microorganisms was investigated. Production of lignin-degrading enzymes and PAH mineralization in the soil were also determined. A. discolor was able to degrade PAHs in Kirk medium with the highest removal occurring in a PAH mixture, suggesting synergistic effects between PAHs or possible cometabolism. A high removal capability for phenanthrene (62%), anthracene (73%), fluoranthene (54%), pyrene (60%) and benzo(a)pyrene (75%) was observed in autoclaved soil inoculated with A. discolor in the absence of indigenous microorganisms, associated with the production of manganese peroxidase (MnP). The metabolites found in the PAH degradation were anthraquinone, phthalic acid, 4-hydroxy-9-fluorenone, 9-fluorenone and 4,5-dihydropyrene. A. discolor was able to mineralize 9% of the phenanthrene. In non-autoclaved soil, the inoculation with A. discolor did not improve the removal efficiency of PAHs. Suitable conditions must be found to promote a successful fungal bioaugmentation in non-autoclaved soils. © 2010 Elsevier B.V.
|
|
| 5. |
- Adil, Nurmeen, et al.
(författare)
-
Evaluation of cytotoxicity of areca nut and its commercial products on normal human gingival fibroblast and oral squamous cell carcinoma cell lines
- 2021
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 403
-
Tidskriftsartikel (refereegranskat)abstract
- Consumption of areca nut products is the most common cause of oral cancers, particularly in South Asian countries. This study evaluates the cytotoxic and necrotizing effects of areca nut and its formulations on normal human gingival fibroblasts (HGF-1) and oral squamous cell carcinoma (OSCC, CAL-27) cell lines. Identification of various carcinogens and adulterants using LC-HR-ESI-MS/MS analysis was performed in the extracts of areca nut and its products. Apart from alkaloids and flavonoids, a major adulterant, saccharin was found in all the samples of chalia (one of the most common chewing products of areca nut) in the ranges between 1.697-7.170 mg/g of the sample. Cytotoxic studies showed that most of the areca nut products were found cytotoxic to HGF-1 cells while being relatively non-cytotoxic against CAL-27 cells, rather they promote the growth of cancer cells. Our findings revealed that the components of areca nut and its products were injurious to HGF-1 cells and caused necrosis, which may attenuate HGF-1 protection toward oral epithelial cells. Moreover, the non-cytotoxic effect of these products on cancer cell lines suggests further predisposal of the habitual chewers for developing oral carcinomas. This study will give a better understanding of the hazardous effects of areca nut products.
|
|
| 6. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Gold nanoparticles coated with polyvinylpyrrolidone and sea urchin extracellular molecules induce transient immune activation
- 2021
-
Ingår i: Journal of Hazardous Materials. - Amsterdam : Elsevier. - 0304-3894 .- 1873-3336. ; 402
-
Tidskriftsartikel (refereegranskat)abstract
- We report that the immunogenicity of colloidal gold nanoparticles coated with polyvinylpyrrolidone (PVP-AuNPs) in a model organism, the sea urchin Paracentrotus lividus, can function as a proxy for humans for in vitro immunological studies. To profile the immune recognition and interaction from exposure to PVP-AuNPs (1 and 10 μg mL-1), we applied an extensive nano-scale approach, including particle physicochemical characterisation involving immunology, cellular biology, and metabolomics. The interaction between PVP-AuNPs and soluble proteins of the sea urchin physiological coelomic fluid (blood equivalent) results in the formation of a protein "corona" surrounding the NPs from three major proteins that influence the hydrodynamic size and colloidal stability of the particle. At the lower concentration of PVP-AuNPs, the P. lividus phagocytes show a broad metabolic plasticity based on the biosynthesis of metabolites mediating inflammation and phagocytosis. At the higher concentration of PVP-AuNPs, phagocytes activate an immunological response involving Toll-like receptor 4 (TLR4) signalling pathway at 24 hours of exposure. These results emphasise that exposure to PVP-AuNPs drives inflammatory signalling by the phagocytes and the resolution at both the low and high concentrations of the PVP-AuNPs and provides more details regarding the immunogenicity of these NPs.
|
|
| 7. |
- Alijagic, Andi, 1992-, et al.
(författare)
-
Titanium dioxide nanoparticles temporarily influence the sea urchin immunological state suppressing inflammatory-relate gene transcription and boosting antioxidant metabolic activity
- 2020
-
Ingår i: Journal of Hazardous Materials. - Amsterdam : Elsevier. - 0304-3894 .- 1873-3336. ; 384
-
Tidskriftsartikel (refereegranskat)abstract
- Titanium dioxide nanoparticles (TiO2NPs) are revolutionizing biomedicine due to their potential application as diagnostic and therapeutic agents. However, the TiO2NP immune-compatibility remains an open issue, even for ethical reasons. In this work, we investigated the immunomodulatory effects of TiO2NPs in an emergent proxy to human non-mammalian model for in vitro basic and translational immunology: the sea urchin Paracentrotus lividus. To highlight on the new insights into the evolutionarily conserved intracellular signaling and metabolism pathways involved in immune-TiO2NP recognition/interaction we applied a wide-ranging approach, including electron microscopy, biochemistry, transcriptomics and metabolomics. Findings highlight that TiO2NPs interact with immune cells suppressing the expression of genes encoding for proteins involved in immune response and apoptosis (e.g. NF-κB, FGFR2, JUN, MAPK14, FAS, VEGFR, Casp8), and boosting the immune cell antioxidant metabolic activity (e.g. pentose phosphate, cysteine-methionine, glycine-serine metabolism pathways). TiO2NP uptake was circumscribed to phagosomes/phagolysosomes, depicting harmless vesicular internalization. Our findings underlined that under TiO2NP-exposure sea urchin innate immune system is able to control inflammatory signaling, excite antioxidant metabolic activity and acquire immunological tolerance, providing a new level of understanding of the TiO2NP immune-compatibility that could be useful for the development in Nano medicines.
|
|
| 8. |
- Allegrini, Elisa, et al.
(författare)
-
Quality and generation rate of solid residues in the boiler of a waste-to-energy plant
- 2014
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 270, s. 127-136
-
Tidskriftsartikel (refereegranskat)abstract
- The Danish waste management system relies significantly on waste-to-energy (WtE) plants. The ash produced at the energy recovery section (boiler ash) is classified as hazardous waste, and is commonly mixed with fly ash and air pollution control residues before disposal. In this study, a detailed characterization of boiler ash from a Danish grate-based mass burn type WtE was performed, to evaluate the potential for improving ash management. Samples were collected at 10 different points along the boiler's convective part, and analysed for grain size distribution, content of inorganic elements, polychlorinated dibenzo-. p-dioxins and dibenzofurans (PCDD and PCDF), and leaching of metals. For all samples, PCDD and PCDF levels were below regulatory limits, while high pH values and leaching of e.g. Cl were critical. No significant differences were found between boiler ash from individual sections of the boiler, in terms of total content and leaching, indicating that separate management of individual ash fractions may not provide significant benefits.
|
|
| 9. |
- Altarawneh, Mohammednoor, et al.
(författare)
-
Formation of polybrominated dibenzofurans (PBDFs) and polybrominated diphenyl ethers (PBDEs) from oxidation of brominated flame retardants (BFRs)
- 2020
-
Ingår i: Journal of Hazardous Materials. - : Elsevier. - 0304-3894 .- 1873-3336. ; 400
-
Tidskriftsartikel (refereegranskat)abstract
- Brominated aromatic rings constitute main structural entities in virtually all commercially deployed brominated flame retardants (BFRs). Oxidative decomposition of BFRs liberates appreciable quantities of bromobenzenes (BBzs). This contribution reports experimental measurements for the generation of notorious polybrominated dibenzofurans (PBDFs) and polybrominated diphenyl ethers (PBDEs) from oxidation of monobromobenzene (MBBz). In the light of developed product profiles, we map out reaction pathways and report kinetic parameters for PBDFs and PBDEs formation from coupling reactions of MBBz molecule and its derived ortho-bromophenoxy (o-BPhxy) radical using quantum chemical calculations. The identification and quantitation of product species involve the use of gas chromatograph - triple quadrupole mass spectrometer (GC-QQQMS) operating in the multiple reaction monitoring (MRM) mode. Bimolecular reactions of MBBz and o-BPhxy result in the generation of twelve pre-PBDF intermediates, of which four can also serve as building blocks for the synthesis of PBDEs. These four intermediates are denoted as pre-PBDE/pre-PBDF, with the remaining eight symbolised as pre-PBDF. The resonance-stabilised structure of the o-BPhxy radical accumulates more spin density character on its phenoxy O atom (30.9 %) in reference to ortho-C and para-C sites. Thus, the formation of the pre-PBDE/pre-PBDF structures via O/o-C couplings advances faster as it requires lower activation enthalpies (79.2 – 84.9 kJ mol−1) than the pre-PBDF moieties, which arise via pairing reactions involving o-C(H or Br)/o-C(H or Br) sites (97.2 – 180.2 kJ mol−1). Kinetic analysis indicates that, the O/o-C pre-PBDE/pre-PBDF adducts self-eject the out-of-plane H atoms to produce PBDEs, rather than undergo a three-step mechanism forming PBDFs. However, experimental measurements demonstrate PBDEs appearing in lower yields as compared to those of PBDFs; presumably due to H- and Br-induced conversion of the PBDEs into PBDFs following a simple ring-closure reaction. High reaction temperatures facilitate loss of ortho Br atom from PBDEs, followed by cyclisation step to generate PBDFs. PBDFs are observed in a narrow temperature range of 700–850 °C, whereas PBDEs form between 550–850 °C. Since formation mechanisms of PBDFs and polybrominated dibenzo-p-dioxins (PBDDs) are typically only sensitive to the bromination at ortho positions, the results reported herein apply also to higher brominated isomers of BBzs.
|
|
| 10. |
- Alverbro, Karin, et al.
(författare)
-
A life cycle assessment of destruction of ammunition
- 2009
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 170:2-3, s. 1101-1109
-
Tidskriftsartikel (refereegranskat)abstract
- The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.
|
|
