| 1. |
- Fullham, S, et al.
(författare)
-
Carbon Nanotube Templated Self-Assembly and Thermal Processing of Gold Nanowires
- 2000
-
Ingår i: Advanced Materials. - 0935-9648 .- 1521-4095. ; 12:19, s. 1430-1432
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- Gold nanowires have been produced by the self-assembly of gold nanoparticles onto multi-walled carbon nanotubes. The nanotubes were mixed with a suspension of gold nanoparticles, resulting in a decrease in color intensity of the suspension, and indicating binding between the nanotubes and the gold (see Figure). Subsequent heating in air for 2 min gave rise to continuous nanowires up to 10 μm in length (see also cover).
|
|
| 2. |
- Aitola, Kerttu, et al.
(författare)
-
High Temperature-Stable Perovskite Solar Cell Based on Low-Cost Carbon Nanotube Hole Contact
- 2017
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 29:17
-
Tidskriftsartikel (refereegranskat)abstract
- Mixed ion perovskite solar cells (PSC) are manufactured with a metal-free hole contact based on press-transferred single-walled carbon nanotube (SWCNT) film infiltrated with 2,2,7,-7-tetrakis(N, N-di-p-methoxyphenylamine)-9,90-spirobifluorene (Spiro-OMeTAD). By means of maximum power point tracking, their stabilities are compared with those of standard PSCs employing spin-coated Spiro-OMeTAD and a thermally evaporated Au back contact, under full 1 sun illumination, at 60 degrees C, and in a N-2 atmosphere. During the 140 h experiment, the solar cells with the Au electrode experience a dramatic, irreversible efficiency loss, rendering them effectively nonoperational, whereas the SWCNT-contacted devices show only a small linear efficiency loss with an extrapolated lifetime of 580 h.
|
|
| 3. |
|
|
| 4. |
- Arjmandi-Tash, Hadi, et al.
(författare)
-
Zero-Depth Interfacial Nanopore Capillaries
- 2018
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 30:9
-
Tidskriftsartikel (refereegranskat)abstract
- High-fidelity analysis of translocating biomolecules through nanopores demands shortening the nanocapillary length to a minimal value. Existing nanopores and capillaries, however, inherit a finite length from the parent membranes. Here, nanocapillaries of zero depth are formed by dissolving two superimposed and crossing metallic nanorods, molded in polymeric slabs. In an electrolyte, the interface shared by the crossing fluidic channels is mathematically of zero thickness and defines the narrowest constriction in the stream of ions through the nanopore device. This novel architecture provides the possibility to design nanopore fluidic channels, particularly with a robust 3D architecture maintaining the ultimate zero thickness geometry independently of the thickness of the fluidic channels. With orders of magnitude reduced biomolecule translocation speed, and lowered electronic and ionic noise compared to nanopores in 2D materials, the findings establish interfacial nanopores as a scalable platform for realizing nanofluidic systems, capable of single-molecule detection.
|
|
| 5. |
- Bobek, Thomas, et al.
(författare)
-
Self-organized hexagonal patterns of independent magnetic nanodots
- 2007
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 19:24, s. 4375-
-
Tidskriftsartikel (refereegranskat)abstract
- A method for producing self-organised arrays of nanometric metallic dots is reported. It consists on developing first the nanodot pattern by ion erosion on a semiconductor cover film and transferring it to a previously buried metallic layer. This procedure has been applied to Co, and the ferromagnetic behaviour of the dots at room temperature is demonstrated.
|
|
| 6. |
- Cao, Fangcheng, et al.
(författare)
-
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
- 2022
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095. ; 34:13
-
Forskningsöversikt (refereegranskat)abstract
- As an emerging star of 2D nanomaterials, 2D transition metal carbides and nitrides, named MXenes, present a large potential in various research areas owing to their intrinsic multilayer structure and intriguing physico-chemical properties. However, the fabrication and application of functional MXene-based devices still remain challenging as they are prone to oxidative degradation under ambient environment. Within this review, the preparation methods of MXenes focusing on the recent investigations on their thermal structure-stability relationships in inert, oxidizing, and aqueous environments are systematically introduced. Moreover, the key factors that affect the oxidation of MXenes, such as, atmosphere, temperature, composition, microstructure, and aqueous environment, are reviewed. Based on different scenarios, strategies for avoiding or delaying the oxidation of MXenes are proposed to encourage the utilization of MXenes in complicated environments, especially at high temperature. Furthermore, the chemistry of MXene-derived oxides is analyzed, which can offer perspectives on the further design and fabrication of novel 2D composites with the unique structures of MXenes being preserved.
|
|
| 7. |
- Chen, Song, et al.
(författare)
-
Formation of Amorphous Iron-Calcium Phosphate with High Stability
- 2023
-
Ingår i: Advanced Materials. - : John Wiley & Sons. - 0935-9648 .- 1521-4095. ; 35:33
-
Tidskriftsartikel (refereegranskat)abstract
- Amorphous iron-calcium phosphate (Fe-ACP) plays a vital role in the mechanical properties of teeth of some rodents, which are very hard, but its formation process and synthetic route remain unknown. Here, the synthesis and characterization of an iron-bearing amorphous calcium phosphate in the presence of ammonium iron citrate (AIC) are reported. The iron is distributed homogeneously on the nanometer scale in the resulting particles. The prepared Fe-ACP particles can be highly stable in aqueous media, including water, simulated body fluid, and acetate buffer solution (pH 4). In vitro study demonstrates that these particles have good biocompatibility and osteogenic properties. Subsequently, Spark Plasma Sintering (SPS) is utilized to consolidate the initial Fe-ACP powders. The results show that the hardness of the ceramics increases with the increase of iron content, but an excess of iron leads to a rapid decline in hardness. Calcium iron phosphate ceramics with a hardness of 4 GPa can be achieved, which is higher than that of human enamel. Furthermore, the ceramics composed of iron-calcium phosphates show enhanced acid resistance. This study provides a novel route to prepare Fe-ACP, and presents the potential role of Fe-ACP in biomineralization and as starting material to fabricate acid-resistant high-performance bioceramics.
|
|
| 8. |
- Dash, Aditya, 2023-, et al.
(författare)
-
Spontaneous Modulation Doping in Semi‐Crystalline Conjugated Polymers Leads to High Conductivity at Low Doping Concentration
- 2023
-
Ingår i: Advanced Materials. - : Wiley-VCH Verlagsgesellschaft. - 0935-9648 .- 1521-4095.
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility to control the charge carrier density through doping is one of the defining properties of semiconductors. For organic semiconductors, the doping process is known to come with several problems associated with the dopant compromising the charge carrier mobility by deteriorating the host morphology and/or introducing Coulomb traps. While for inorganic semiconductors these factors can be mitigated through (top-down) modulation doping, this concept has not been employed in organics. Here, this work shows that properly chosen host/dopant combinations can give rise to spontaneous, bottom-up modulation doping, in which the dopants preferentially sit in an amorphous phase, while the actual charge transport occurs predominantly in a crystalline phase with an unaltered microstructure, spatially separating dopants and mobile charges. Combining experiments and numerical simulations, this work shows that this leads to exceptionally high conductivities at relatively low dopant concentrations.
|
|
| 9. |
- Feng, Jun, et al.
(författare)
-
Giant Moisture Responsiveness of VS2 Ultrathin Nanosheets for Novel Touchless Positioning Interface
- 2012
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 24:15, s. 1969-1974
-
Tidskriftsartikel (refereegranskat)abstract
- Utilizing a thin film of VS2 ultrathin nanosheets with giant and fast moisture responsiveness, a brand-new model of moisture-based positioning interface is put forward here, by which not only the 2D position information of finger tips can be acquired, but also the relative height can be detected as the third dimensionality, representing a promising platform for advanced man-machine interactive systems.
|
|
| 10. |
- Gao, Lingfeng, et al.
(författare)
-
Hetero-MXenes : Theory, Synthesis, and Emerging Applications
- 2021
-
Ingår i: Advanced Materials. - : John Wiley & Sons. - 0935-9648 .- 1521-4095. ; 33:10
-
Forskningsöversikt (refereegranskat)abstract
- Since their discovery in 2011, MXenes (abbreviation for transition metal carbides, nitrides, and carbonitrides) have emerged as a rising star in the family of 2D materials owing to their unique properties. Although the primary research interest is still focused on pristine MXenes and their composites, much attention has in recent years been paid also to MXenes with diverse compositions. To this end, this work offers a comprehensive overview of the progress on compositional engineering of MXenes in terms of doping and substituting from theoretical predictions to experimental investigations. Synthesis and properties are briefly introduced for pristine MXenes and then reviewed for hetero-MXenes. Theoretical calculations regarding the doping/substituting at M, X, and T sites in MXenes and the role of vacancies are summarized. After discussing the synthesis of hetero-MXenes with metal/nonmetal (N, S, P) elements by in situ and ex situ strategies, the focus turns to their emerging applications in various fields such as energy storage, electrocatalysts, and sensors. Finally, challenges and prospects of hetero-MXenes are addressed. It is anticipated that this review will be beneficial to bridge the gap between predictions and experiments as well as to guide the future design of hetero-MXenes with high performance.
|
|
