| 1. |
- Ichioka, Yuki, et al.
(författare)
-
Epigenetic changes of osteoblasts in response to titanium surface characteristics.
- 2021
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 109:2, s. 170-180
-
Tidskriftsartikel (refereegranskat)abstract
- We aimed to investigate the influence of titanium surface characteristics on epigenetic mechanisms and DNA damage/repair pathways. Osteoblast-like cells (MG63) were incubated on glass, smooth titanium, and minimally rough titanium discs, respectively, for 0, 1, 6, and 24 hr. The presence of double-stranded DNA damage (γH2AX), DNA repair (Chk2), and epigenetic markers (AcH3 & DNMT1) were investigated using immunofluorescence. There were no Chk2-positive cells on the minimally rough titanium surfaces at all-time points, in comparison to glass and smooth titanium. Total γH2AX-positive cells on minimally rough titanium gradually decreased as incubation time increased, on the contrary to smooth titanium. Minimally rough titanium surfaces induced cytoplasmic staining of DNMT1 up to 99% at 24 hr. For epigenetic markers related to the DNA damage/repair pathway, minimally rough titanium surfaces showed the lower percentage of AcH3-positive cells compared to glass and smooth titanium surface. The findings in the current study show that titanium surface characteristics indeed influence DNA damage and the DNA repair pathway, including epigenetic factors.
|
|
| 2. |
- Jarmar, T., et al.
(författare)
-
Technique for preparation and characterization in cross-section of oral titanium implant surfaces using focused ion beam and transmission electron microscopy
- 2008
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 87:4, s. 1003-9
-
Tidskriftsartikel (refereegranskat)abstract
- The surface properties of materials are believed to control most of the biological reactions toward implanted materials. To study the surface structure, elemental distribution, and morphology, using transmission electron microscopy (TEM) techniques, thin foils of the surface (in cross-section) are needed. These have been cumbersome to produce, in particular, from the normally irregular screw-shaped metal implants. Focused ion beam (FIB) microscopy has been developed partly for TEM sample preparation, mainly within the microelectronics industry. Our study describes a method based on FIB for producing electron transparent foils/sections from a metal implant for TEM analysis. Using a screw-shaped titanium dental implant, it was demonstrated that thin foils can be prepared with submicron specificity and from almost any surface geometry. A comparison of different lift-out techniques showed that the in situ lift-out preparation technique allowed plasma cleaning and produced particularly good samples with excellent yield. The titanium oxide on the implant surface was analyzed using energy-filtered TEM (EFTEM) and high-resolution TEM (HRTEM) and the TiO(2) rutile phase being determined via the lattice parameters. This study provides the first set of data for the optimization of a new route for preparation and analysis of biomaterial surfaces and interfaces.
|
|
| 3. |
- Karlsson, Johan, 1984, et al.
(författare)
-
Stem cell homing using local delivery of plerixafor and stromal derived growth factor-1alpha for improved bone regeneration around Ti-implants
- 2016
-
Ingår i: Journal of Biomedical Materials Research - Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 104:10, s. 2466-2475
-
Tidskriftsartikel (refereegranskat)abstract
- Triggering of the early healing events, including the recruitment of progenitor cells, has been suggested to promote bone regeneration. In implantology, local drug release technologies could provide an attractive approach to promote tissue regeneration. In this study, we targeted the chemotactic SDF-1a/CXCR4 axis that is responsible e.g. for the homing of stem cells to trauma sites. This was achieved by local delivery of plerixafor, an antagonist to CXCR4, and/or SDF-1a from titanium implants coated with mesoporous titania thin films with a pore size of 7.5 nm. In vitro drug delivery experiments demonstrated that the mesoporous coating provided a high drug loading capacity and controlled release. The subsequent in vivo study in rat tibia showed beneficial effects with respect to bone-implant anchorage and bone-formation along the surface of the implants when plerixafor and SDF-1a were delivered locally. The effect was most prominent by the finding that the combination of the drugs significantly improved the mechanical bone anchorage. These observations suggest that titanium implants with local delivery of drugs for enhanced local recruitment of progenitor cells have the ability to promote osseointegration. This approach may provide a potential strategy for the development of novel implant treatments.
|
|
| 4. |
- Omar, Omar, et al.
(författare)
-
In vivo gene expression in response to anodically oxidized versus machined titanium implants.
- 2010
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 92:4, s. 1552-1566
-
Tidskriftsartikel (refereegranskat)abstract
- A quantitative polymerase chain reaction technique (qPCR) in combination with scanning electron microscopy was applied for the evaluation of early gene expression response and cellular reactions close to titanium implants. Anodically oxidized and machined titanium miniscrews were inserted in rat tibiae. After 1, 3, and 6 days the implants were unscrewed and the surrounding bone was retrieved using trephines. Both the implants and bone were analyzed with qPCR. A greater amount of cells, as indicated with higher expression of 18S, was detected on the oxidized surface after 1 and 6 days. Significantly higher osteocalcin (at day 6), alkaline phosphatase (at days 3 and 6), and cathepsin K (at day 3) expression was demonstrated for the oxidized surface. Higher expression of tumor necrosis factor-alpha (at day 1) and interleukin-1beta (at days 1 and 6) was detected on the machined surfaces. SEM revealed a higher amount of mesenchymal-like cells on the oxidized surface. The results show that the rapid recruitment of mesenchymal cells, the rapid triggering of gene expression crucial for bone remodeling and the transient nature of inflammation, constitute biological mechanisms for osseointegration, and high implant stability associated with anodically oxidized implants. (c) 2009 Wiley Periodicals, Inc. J Biomed Mater Res, 2009.
|
|
| 5. |
- Palmquist, Anders, 1977, et al.
(författare)
-
Biomechanical, Histological and Ultrastructural Analyses of Laser Micro- and Nano-structured Titanium Alloy Implants : A Study in Rabbit
- 2010
-
Ingår i: Journal of Biomedical Materials Research - Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 92A:4, s. 1476-1486
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of this study was to evaluate the biomechanical properties and ultrastructure of the bone response of partly laser-modified Ti6Al4V implants compared with turned, machined implants after 8 weeks in rabbit. The surface analyses performed with interference microscopy and electron microscopy showed increased surface topography with micro- and nano-sized surface features as well as increased oxide thickness of the modified surface. The biomechanical testing demonstrated a 270% increase in torque value for the surface modified implants compared with the control implants. Histological evaluation of ground sections of specimens subjected to biomechanical testing revealed ongoing bone formation and remodeling. A histological feature exclusively observed at the laser-modified surface was the presence of fracture in the mineralized bone rather than at the interface between the bone and implant. Transmission electron microscopy (TEM) was performed on Focused Ion Beam (FIB) prepared samples of the intact bone-implant interface, demonstrating a direct contact between nanocrystalline hydroxyapatite and the oxide of the laser-modified implant surface. In conclusion, laser-modified titanium alloy implants have significantly stronger bone anchorage compared with machined implants and show no adverse tissue reactions.
|
|
| 6. |
- Rydén, Louise, 1975, et al.
(författare)
-
Early inflammatory response in soft tissues induced by thin calcium phosphates.
- 2013
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 101A:9
-
Tidskriftsartikel (refereegranskat)abstract
- The inflammatory response to titanium and hydroxyapatite (HA)-coated titanium in living tissue is controlled by a number of humoral factors, of which monocyte chemoattractant protein-1 (MCP-1) has been specifically linked to the recruitment of monocytes. These cells subsequently mature into tissue-bound macrophages. Macrophages adhering to the proteins adsorbed at the implant surface play a pivotal role in initiating the rejection or integration of the foreign material. Despite this, little is known about the initial inflammatory events that occur in soft tissues following the implantation of titanium and HA-coated titanium implants. In this study, circular discs of commercially pure titanium (c.p. Ti) with either a thin crystalline HA coating or amorphous HA coating or uncoated were implanted subcutaneously into rats. The implants were retrieved after 24 and 72 h. The lactate dehydrogenase (LD) activity, DNA content, expression of MCP-1, interleukin-10 (IL-10), tumor necrosis factor α (TNF-α), as well as monocyte and polymorphonuclear granulocyte counts in the exudate surrounding the implants were analyzed. There were significantly higher DNA and LD levels around the titanium implants at 24 h compared with HA-coated titanium. A rapid decrease in MCP-1 levels was observed for all the implants over the period of observation. No statistically significant differences were found between the two HA-coated implants. Our results suggest a difference in the early soft-tissue response to HA-coated implants when compared with titanium implants, expressed as a downregulation of inflammatory cell recruitment. This suggests that thin HA coatings are promising surfaces for soft tissue applications.
|
|
| 7. |
- Suska, Felicia, 1974, et al.
(författare)
-
Fibrous capsule formation around titanium and copper.
- 2008
-
Ingår i: Journal of Biomedical Materials Research Part A. - : Wiley. - 1549-3296 .- 1552-4965 .- 0021-9304 .- 1097-4636. ; 85:4, s. 888-96
-
Tidskriftsartikel (refereegranskat)abstract
- Previous studies suggest that implant material properties influence the quality and quantity of fibrous capsule around the implant. However, the precise relation between material surface chemistry, early inflammatory response, and fibrous subsequent repair outcome is still unknown. Titanium (Ti) and copper (Cu), surfaces with different inflammatory potential, were implanted subcutaneously in rats and retrieved fibrous capsules were analyzed after 28 and 56 days. Histological examinations show pronounced differences in capsule morphology. The fibrous capsule around Ti was thinner than that around Cu, with less number of the inflammatory cells in the layer close to the implant surface, and less and smaller blood vessels. The capsule around Cu was thick, with a large number of the inflammatory cells, particularly macrophages and giant cells, and increased number of blood vessels. Our study suggests that material surface properties, which initiate early, multiple cellular inflammatory events, are also associated with increased fibrosis and angiogenesis during repair phase. (c) 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2007.
|
|
| 8. |
- Esguerra, Maricris, 1981, et al.
(författare)
-
Intravital fluorescent microscopic evaluation of bacterial cellulose as scaffold for vascular grafts.
- 2010
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1552-4965 .- 1549-3296. ; 93:1, s. 140-9
-
Tidskriftsartikel (refereegranskat)abstract
- Although commonly used synthetic vascular grafts perform satisfactorily in large caliber blood vessels, they are prone to thrombosis in small diameter vessels. Therefore, small vessels might benefit from tissue engineered vascular grafts. This study evaluated bacterial cellulose (BC) as a potential biomaterial for biosynthetic blood vessels. We implanted the dorsal skinfold chambers in three groups of Syrian golden hamsters with BC (experimental group), polyglycolic acid, or expanded polytetrafluorethylene (control groups). Following implantation, we used intravital fluorescence microscopy, histology, and immunohistochemistry to analyze the biocompatibility, neovascularization, and incorporation of each material over a time period of 2 weeks. Biocompatibility was good in all groups, as indicated by the absence of leukocyte activation upon implantation. All groups displayed angiogenic response in the host tissue, but that response was highest in the polyglycolic acid group. Histology revealed vascularized granulation tissue surrounding all three biomaterials, with many proliferating cells and a lack of apoptotic cell death 2 weeks after implantation. In conclusion, BC offers good biocompatibility and material incorporation compared with commonly used materials in vascular surgery. Thus, BC represents a promising new biomaterial for tissue engineering of vascular grafts.
|
|
| 9. |
- Göransson, Anna, 1970, et al.
(författare)
-
Inflammatory response to titanium surfaces with fibrinogen and catalase coatings: an in vitro study.
- 2007
-
Ingår i: Journal of biomedical materials research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 80:3, s. 693-9
-
Tidskriftsartikel (refereegranskat)abstract
- The aim of the present study was to evaluate the possibility to modulate the early inflammatory response in vitro by coating titanium surfaces with candidate proinflammatory (fibrinogen coated turned titanium "Fib") and antiinflammatory proteins (catalase on top of fibrinogen coated turned titanium "Cat"). Additionally, turned titanium surfaces (Ti) were used as controls. The discs were incubated with human mononuclear cells. Adhered cells were investigated with respect to number, viability, differentiation (acute marker 27E10 vs. chronic marker RM3/1), and cytokine production (TNF-alpha and IL-10), after 24 and 72 h. The results indicated that it is possible to modulate the inflammatory response with protein coatings. However, the strongest inflammatory response, indicated by increased number of adhered cells and release of pro and antiinflammatory mediators, was induced by Cat. Furthermore, the cytokine production on this surface was not sensitive to LPS stimulation. Differentiation measured as the expression of the chronic cell surface marker, dominated after 72 h for all surface modifications and Cat displayed an increased number compared to the others. A decrease in the total number of adhered cells and amounts of TNF-alpha were observed on all surfaces over time. The cell viability was, in general, high for all tested surfaces. In conclusion, the study proved it possible to influence the early inflammatory response in vitro by immobilizing protein coatings to titanium surfaces. However, the catalase surface demonstrated the strongest inflammatory response, and the possibility to selectively use the potent antiinflammatory capacity of catalase needs to be further evaluated.
|
|
| 10. |
- Han, Yilin, et al.
(författare)
-
Effect of scaffold properties on adhesion and maintenance of boundary cap neural crest stem cells in vitro
- 2020
-
Ingår i: Journal of Biomedical Materials Research. Part A. - : Wiley. - 1549-3296 .- 1552-4965. ; 108:6, s. 1274-1280
-
Tidskriftsartikel (refereegranskat)abstract
- Optimal combination of stem cells and biocompatible support material is a promising strategy for successful tissue engineering. The required differentiation of stem cells is crucial for functionality of engineered tissues and can be regulated by chemical and physical cues. Here we examined how boundary cap neural crest stem cells (bNCSCs) are affected when cultured in the same medium, but on collagen- or laminin-polyacrylamide (PAA) scaffolds of different stiffness (0.5, 1, or similar to 7 kPa). bNCSCs displayed marked differences in their ability to attach, maintain a large cell population and differentiate, depending on scaffold stiffness. These findings show that the design of physical cues is an important parameter to achieve optimal stem cell properties for tissue repair and engineering.
|
|
