| 1. |
- Liu, Jianhua, et al.
(författare)
-
Metal nanowire networks : Recent advances and challenges for new generation photovoltaics
- 2019
-
Ingår i: Materials Today Energy. - : ELSEVIER SCI LTD. - 2468-6069. ; 13, s. 152-185
-
Forskningsöversikt (refereegranskat)abstract
- Transparent conducting electrodes which allow photons passing through and simultaneously transfers the charge carriers are critical for the construction of high-performance photovoltaic cells. Electrodes based on metal oxides, such as indium-doped tin oxide (ITO) or fluorine-doped tin oxide (FTO), may have limited application in new generation flexible solar cells, which employ solution-processed roll-to-roll or ink-printing techniques toward large-area-fabrication approach, due to their brittleness and poor mechanical properties. Metal nanowire network (MNWN) emerges as a highly potential alternative candidate instead of ITO or FTO due to the high transparency, low sheet resistance, low cost, solution processable and compatibility with a flexible substrate for high throughput production. This feature article systematically summarizes the recent advances of the MNWNs, including new concepts and emerging strategies for the synthesis of metal nanowires (MNWs), various approaches for the preparation of MNWNs and comprehensively discusses the novel MNWN electrodes prepared on different substrates. The state-of-the-art new generation solar cell devices, such as transparent, flexible and light-weight solar cells, with MNWN as a transparent conductive electrode are emphasized. Finally, the opportunities and challenges for the development of MNWN electrodes toward application in the new generations of photovoltaic devices are discussed.
|
|
| 2. |
- Raza, Rizwan, 1980, et al.
(författare)
-
Functional ceria-based nanocomposites for advanced low-temperature (300–600 °C) solid oxide fuel cell: A comprehensive review
- 2020
-
Ingår i: Materials Today Energy. - : Elsevier BV. - 2468-6069. ; 15
-
Forskningsöversikt (refereegranskat)abstract
- There is world tendency to develop SOFC to lower temperatures and two technical routes and approaches are going in parallel. One is to use thin film technology, focussing on reducing the electrolyte thickness on conventional electrolyte, e.g. YSZ (yttria-stabilized zirconia) and SDC (samaria-doped ceria) to reduce the cell resistance i.e. to lower the operational temperatures. Another technique is to develop new materials, e.g. functional nanocomposites. This paper presents a state-of-the-art of nanocomposite electrolytes-based advanced fuel cell technology, i.e. low-temperature (300–600 °C) ceria-based fuel cells, a new scenario for fuel cell R&D with an overview of important aspects and frontier subjects. A typical nanocomposite has a core–shell type structure in nano-scale, in which ceria forms a core and a salt, e.g. carbonate or another oxide develops a shell layer covering the core. The functionality of nanocomposites is determined by the interfaces between the constituent phases, which can lead to super or fast ions transport (H+ and O2−) at interfaces. Ionic conductivities >0.1 S cm−1 already at ~300 °C have been reported. Five major characteristics of nanocomposites have been identified as important to their properties and applications in fuel cells: i) advanced materials design based on non-structure or interfacial properties/mechanisms; ii) dual or hybrid H+ and O2− conduction; iii) interfacial super-ionic conduction; iv) transition from non-functional to functional materials; v) use of interfacial and surface redox agents and reactions. In the fuel cell context, it is refer to these functional nano-composites as NANOCOFC (Nanocomposites for Advanced Fuel Cells) to distinguish them from the traditional SOFCs and to be oriented to a new fuel cell R&D strategy.
|
|
