| 1. |
- Aare, Magnus, et al.
(author)
-
Injuries from motorcycle- and moped crashes in Sweden from 1987 to 1999.
- 2003
-
In: Injury control and safety promotion. - : Informa UK Limited. - 1566-0974 .- 1744-4985. ; 10:3, s. 131-8
-
Journal article (peer-reviewed)abstract
- The objective of this paper is to study injuries from motorcycle and moped crashes in Sweden from 1987 to 1999. Databases at the National Board for Health and Welfare and codes from both ICD9 and ICD10 systems were used, including patterns of age, gender, E-code and type of injury. Length of hospital stay, type of injuries and trends over time was evaluated. To get a more detailed picture of the age distribution, type of vehicle used and number of killed, data from the Swedish National Road Administration were also used. In Sweden, 27,122 individuals received in-patient care due to motorcycle and moped injuries between 1987 and 1999. The motorcycle and moped injury rate was reduced in the second half of the studied period and so were the total days of treatment per year. Males had eight times the incidence of injuries compared to females. Riders under the age of 26 and in particular those at an age of 15 had the highest incidence rate. Head injuries were the most frequent diagnosis, followed by fractures to the lower limbs. Concussion was the most frequent head injury. Focal and diffuse brain injuries combined showed the same frequency as concussion. It is concluded that more preventative strategies must be presented before the injury rate can be reduced.
|
|
| 2. |
- Aare, Magnus, et al.
(author)
-
Injury tolerances for oblique impact helmet testing
- 2004
-
In: International Journal of Crashworthiness. - : Informa UK Limited. - 1358-8265 .- 1754-2111. ; 9:1, s. 15-23
-
Journal article (peer-reviewed)abstract
- The most frequently sustained severe injuries in motorcycle crashes are injuries to the head, and many of these are caused by rotational force. Rotational force is most commonly the result of oblique impacts to the head. Good testing methods for evaluating the effects of such impacts are currently lacking. There is also a need for improving our understanding of the effects of oblique impacts on the human head. Helmet standards currently in use today do not measure rotational effects in test dummy heads. However rotational force to the head results in large shear strains arising in the brain, which has been proposed as a cause of traumatic brain injuries like diffuse axonal injuries (DAI). This paper investigates a number of well-defined impacts, simulated using a detailed finite element (FE) model of the human head, an FE model of the Hybrid III dummy head and an FE model of a helmet. The same simulations were performed on both the FE human head model and the FE Hybrid III head model, both fitted with helmets. Simulations on both these heads were performed to describe the relationship between load levels in the FE Hybrid III head model and strains in the brain tissue in the FE human head model. In this study, the change in rotational velocity and the head injury criterion (HIC) value were chosen as appropriate measurements. It was concluded that both rotational and translational effects are important when predicting the strain levels in the human brain.
|
|
| 3. |
- Aarestrup, FM, et al.
(author)
-
Towards a European health research and innovation cloud (HRIC)
- 2020
-
In: Genome medicine. - : Springer Science and Business Media LLC. - 1756-994X. ; 12:1, s. 18-
-
Journal article (peer-reviewed)abstract
- The European Union (EU) initiative on the Digital Transformation of Health and Care (Digicare) aims to provide the conditions necessary for building a secure, flexible, and decentralized digital health infrastructure. Creating a European Health Research and Innovation Cloud (HRIC) within this environment should enable data sharing and analysis for health research across the EU, in compliance with data protection legislation while preserving the full trust of the participants. Such a HRIC should learn from and build on existing data infrastructures, integrate best practices, and focus on the concrete needs of the community in terms of technologies, governance, management, regulation, and ethics requirements. Here, we describe the vision and expected benefits of digital data sharing in health research activities and present a roadmap that fosters the opportunities while answering the challenges of implementing a HRIC. For this, we put forward five specific recommendations and action points to ensure that a European HRIC: i) is built on established standards and guidelines, providing cloud technologies through an open and decentralized infrastructure; ii) is developed and certified to the highest standards of interoperability and data security that can be trusted by all stakeholders; iii) is supported by a robust ethical and legal framework that is compliant with the EU General Data Protection Regulation (GDPR); iv) establishes a proper environment for the training of new generations of data and medical scientists; and v) stimulates research and innovation in transnational collaborations through public and private initiatives and partnerships funded by the EU through Horizon 2020 and Horizon Europe.
|
|
| 4. |
- Abbasi Aval, Negar, et al.
(author)
-
Assessing the Layer-by-Layer Assembly of Cellulose Nanofibrils and Polyelectrolytes in Pancreatic Tumor Spheroid Formation
- 2023
-
In: Biomedicines. - : MDPI AG. - 2227-9059. ; 11:11
-
Journal article (peer-reviewed)abstract
- Three-dimensional (3D) tumor spheroids are regarded as promising models for utilization as preclinical assessments of chemo-sensitivity. However, the creation of these tumor spheroids presents challenges, given that not all tumor cell lines are able to form consistent and regular spheroids. In this context, we have developed a novel layer-by-layer coating of cellulose nanofibril–polyelectrolyte bilayers for the generation of spheroids. This technique builds bilayers of cellulose nanofibrils and polyelectrolytes and is used here to coat two distinct 96-well plate types: nontreated/non-sterilized and Nunclon Delta. In this work, we optimized the protocol aimed at generating and characterizing spheroids on difficult-to-grow pancreatic tumor cell lines. Here, diverse parameters were explored, encompassing the bilayer count (five and ten) and multiple cell-seeding concentrations (10, 100, 200, 500, and 1000 cells per well), using four pancreatic tumor cell lines—KPCT, PANC-1, MiaPaCa-2, and CFPAC-I. The evaluation includes the quantification (number of spheroids, size, and morphology) and proliferation of the produced spheroids, as well as an assessment of their viability. Notably, our findings reveal a significant influence from both the number of bilayers and the plate type used on the successful formation of spheroids. The novel and simple layer-by-layer-based coating method has the potential to offer the large-scale production of spheroids across a spectrum of tumor cell lines.
|
|
| 5. |
- Abdel-Rehim, Mohamed, et al.
(author)
-
Microextraction approaches for bioanalytical applications : An overview
- 2020
-
In: Journal of Chromatography A. - : Elsevier B.V.. - 0021-9673 .- 1873-3778. ; 1616
-
Journal article (peer-reviewed)abstract
- Biological samples are usually complex matrices due to the presence of proteins, salts and a variety of organic compounds with chemical properties similar to those of the target analytes. Therefore, sample preparation is often mandatory in order to isolate the analytes from troublesome matrices before instrumental analysis. Because the number of samples in drug development, doping analysis, forensic science, toxicological analysis, and preclinical and clinical assays is steadily increasing, novel high throughput sample preparation approaches are calling for. The key factors in this development are the miniaturization and the automation of the sample preparation approaches so as to cope with most of the twelve principles of green chemistry. In this review, recent trends in sample preparation and novel strategies will be discussed in detail with particular focus on sorptive and liquid-phase microextraction in bioanalysis. The actual applicability of selective sorbents is also considered. Additionally, the role of 3D printing in microextraction for bioanalytical methods will be pinpointed.
|
|
| 6. |
- Abdellah, Tebani, et al.
(author)
-
Integration of molecular profiles in a longitudinal wellness profiling cohort.
- 2020
-
In: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 11:1
-
Journal article (peer-reviewed)abstract
- An important aspect of precision medicine is to probe the stability in molecular profiles among healthy individuals over time. Here, we sample a longitudinal wellness cohort with 100 healthy individuals and analyze blood molecular profiles including proteomics, transcriptomics, lipidomics, metabolomics, autoantibodies and immune cell profiling, complemented with gut microbiota composition and routine clinical chemistry. Overall, our results show high variation between individuals across different molecular readouts, while the intra-individual baseline variation is low. The analyses show that each individual has a unique and stable plasma protein profile throughout the study period and that many individuals also show distinct profiles with regards to the other omics datasets, with strong underlying connections between the blood proteome and the clinical chemistry parameters. In conclusion, the results support an individual-based definition of health and show that comprehensive omics profiling in a longitudinal manner is a path forward for precision medicine.
|
|
| 7. |
- Aberg, P., et al.
(author)
-
Assessment of skin lesions and skin cancer using simple electrical impedance indices
- 2003
-
In: Skin research and technology. - : Wiley. - 0909-752X .- 1600-0846. ; 9:3, s. 257-261
-
Journal article (peer-reviewed)abstract
- Background/aims: Purpose of this investigation was to assess benign pigmented cellular nevus (BEN), basal cell carcinoma (BCC), dermatofibroma (DER), dysplastic nevus (DYS), and seborrheic keratoses (SEB) using in vivo noninvasive electrical impedance technique. Methods: Electrical impedance was measured at 258 BEN, 34 BCC, 17 DER, 35 DYS, and 26 SEB lesions. Controls were measured at healthy skin close to the lesions. The impedance was measured between 1 kHz and 1 MHz at five depth settings. After the impedance measurements the lesions were histopathologically diagnosed. The impedance spectra were parameterized to four indices prior to the statistical analysis of the data. Results: There were significant differences between the lesions and their controls for BEN (P<0.001), BCC (P<0.001), DYS (P<0.01), and SEB(P<0.01). Conclusions: There are clear statistical differences between impedance of common lesions and control skin. With some further developments, the impedance technique can be useful as a diagnostic decision support tool for skin cancer assessment.
|
|
| 8. |
- Aberg, P., et al.
(author)
-
Non-invasive and microinvasive electrical impedance spectra of skin cancer - a comparison between two techniques
- 2005
-
In: Skin research and technology. - 0909-752X .- 1600-0846. ; 11:4, s. 281-286
-
Journal article (peer-reviewed)abstract
- Background/purpose: Bio-electrical impedance spectra of skin cancer and other lesions can be assessed using both regular non-invasive probes and a novel type of microinvasive electrode system with a surface furnished with tiny spikes that penetrate stratum corneum. The aim of the study was to compare the accuracy of detection for various types of skin cancer using impedance spectra measured with these two different electrode systems in an objective way without optimising the power of discrimination. Methods: Impedance spectra of 99 benign nevi, 28 basal cell carcinomas (BCC), and 13 malignant melanomas (MM) were measured using the two electrode systems. Classification of the lesions was made using Fisher's linear discriminant, and the sensitivities and specificities of the techniques were estimated using cross-validation. Results: The best separation between nevi and BCC was achieved using the regular non-invasive probe (96% sensitivity and 86% specificity), whereas the best separation between nevi and MM was achieved using the microinvasive electrodes (92% sensitivity and 80% specificity). Conclusions: Our results indicate that the choice of electrode system is application dependent.
|
|
| 9. |
- Aberg, P., et al.
(author)
-
Skin cancer identification using multifrequency electrical impedance - A potential screening tool
- 2004
-
In: IEEE Transactions on Biomedical Engineering. - 0018-9294 .- 1558-2531. ; 51:12, s. 2097-2102
-
Journal article (peer-reviewed)abstract
- Electrical bio-impedance can be used to assess skin cancers and other cutaneous lesions. The aim of this study was to distinguish skin cancer from benign nevi using multifrequency impedance spectra. Electrical impedance spectra of about 100 skin cancers and 511 benign nevi were measured. Impedance of reference skin was measured ipsi-laterally to the lesions. The impedance relation between lesion and reference skin was used to distinguish the cancers from the nevi. It was found that it is possible to separate malignant melanoma from benign nevi with 75% specificity at 100% sensitivity, and to distinguish nonmelanoma skin cancer from benign nevi with 87% specificity at 100% sensitivity. The power of skin cancer detection using electrical impedance is as good as, or better than, conventional visual screening made by general practitioners.
|
|
| 10. |
- Aberg, P., et al.
(author)
-
Variation of skin properties within human forearms demonstrated by non-invasive detection and multi-way analysis
- 2002
-
In: Skin research and technology. - : Wiley. - 0909-752X .- 1600-0846. ; 8:3, s. 194-201
-
Journal article (peer-reviewed)abstract
- Background: It is known that the properties of human skin vary locally. The purpose of this study was to investigate the properties of human volar forearms even further using advanced non-invasive techniques and numerical methods. Methods: The skin properties of human volar forearms were investigated using measurements of trans epidermal water loss and multifrequency electrical impedance. Eight sites on the forearms of 27 healthy volunteers were measured. The sites were oriented as squares, four sites on both left and right forearm, approximately 40-50 mm apart. Results: Analysis of variance showed significant differences for epidermal water loss (P < 0.01) and the skin impedance (P < 0.001) between the inner and outer sides of the arms. Additionally, parallel factor analysis of the full skin impedance spectra also showed that there are systematic differences between right and left arm (P < 0.01). Conclusions: It is crucial to design skin studies carefully in order to minimise the effects of the local skin properties of human skin.
|
|
