| 1. |
- Abadei, S., et al.
(författare)
-
DC field dependent properties of Na0.5K0.5NbO3/SiO2/Si structures at millimeter-wave frequencies
- 2001
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 78:13, s. 1900-1902
-
Tidskriftsartikel (refereegranskat)abstract
- Dielectric properties of laser-ablated 0.5-mum-thick c-axis epitaxial Na0.5K0.5NbO3 films on high-resistivity (7.7 Omega cm) silicon SiO2/Si substrate are studied experimentally at frequencies up to 40 GHz. For measurements, planar 0.5-mum-thick gold electrodes (interdigital and straight slot) are photolithography defined on the top surface of Na0.5K0.5NbO3 films. The slot width between the electrodes is 2 or 4 mum. 13% capacitance change at 40 V dc bias and Q factor more than 15 are observed at 40 GHz, which makes the structure useful for applications in electrically tunable millimeter-wave devices.
|
|
| 2. |
- Abbasi, Saeed, 1973-, et al.
(författare)
-
Temperature and Thermoelastic Instability at Tread Braking Using Cast Iron Friction Material
- 2013
-
Ingår i: Wear. - : Elsevier BV. - 0043-1648 .- 1873-2577. ; 314:1–2, s. 171-180
-
Tidskriftsartikel (refereegranskat)abstract
- Braking events in railway traffic often induce high frictional heating and thermoelastic instability (TEI) at the interfacing surfaces. In the present paper, two approaches are adopted to analyse the thermomechanical interaction in a pin-on-disc experimental study of railway braking materials. In a first part, the thermal problem is studied to find the heat partitioning between pin and disc motivated by the fact that wear mechanisms can be explained with a better understanding of the prevailing thermal conditions. The numerical model is calibrated using the experimental results. In a second part, the frictionally induced thermoelastic instabilities at the pin-disc contact are studied using a numerical method and comparing them with the phenomena observed in the experiments. The effects of temperature on material properties and on material wear are considered. It is found from the thermal analysis that the pin temperature and the heat flux to the pin increase with increasing disc temperatures up to a transition stage. This agrees with the behaviour found in the experiments. Furthermore, the thermoelastic analysis displays calculated pressure and the temperature distributions at the contact interface that are in agreement with the hot spot behaviour observed in the experiments.
|
|
| 3. |
- Abel, I, et al.
(författare)
-
Overview of the JET results with the ITER-like wall
- 2013
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Tidskriftsartikel (refereegranskat)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
| 4. |
- Abele, H., et al.
(författare)
-
Particle physics at the European Spallation Source
- 2023
-
Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
-
Forskningsöversikt (refereegranskat)abstract
- Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
|
|
| 5. |
- Aboulfadl, Hisham, 1986, et al.
(författare)
-
Alkali Dispersion in (Ag,Cu)(In,Ga)Se2 Thin Film Solar Cells - Insight from Theory and Experiment
- 2021
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 13:6, s. 7188-7199
-
Tidskriftsartikel (refereegranskat)abstract
- Silver alloying of Cu(In,Ga)Se2 absorbers for thin film photovoltaics offers improvements in open-circuit voltage, especially when combined with optimal alkali-treatments and certain Ga concentrations. The relationship between alkali distribution in the absorber and Ag alloying is investigated here, combining experimental and theoretical studies. Atom probe tomography analysis is implemented to quantify the local composition in grain interiors and at grain boundaries. The Na concentration in the bulk increases up to ∼60 ppm for [Ag]/([Ag] + [Cu]) = 0.2 compared to ∼20 ppm for films without Ag and up to ∼200 ppm for [Ag]/([Ag] + [Cu]) = 1.0. First-principles calculations were employed to evaluate the formation energies of alkali-on-group-I defects (where group-I refers to Ag and Cu) in (Ag,Cu)(In,Ga)Se2 as a function of the Ag and Ga contents. The computational results demonstrate strong agreement with the nanoscale analysis results, revealing a clear trend of increased alkali bulk solubility with the Ag concentration. The present study, therefore, provides a more nuanced understanding of the role of Ag in the enhanced performance of the respective photovoltaic devices.
|
|
| 6. |
- Abrahamsson, Christoffer, 1984, et al.
(författare)
-
Magnetic orientation of nontronite clay in aqueous dispersions and its effect on water diffusion
- 2015
-
Ingår i: Journal of Colloid and Interface Science. - : Elsevier BV. - 0021-9797 .- 1095-7103. ; 437, s. 205-210
-
Tidskriftsartikel (refereegranskat)abstract
- The diffusion rate of water in dilute clay dispersions depends on particle concentration, size, shape, aggregation and water-particle interactions. As nontronite clay particles magnetically align parallel to the magnetic field, directional self-diffusion anisotropy can be created within such dispersion. Here we study water diffusion in exfoliated nontronite clay dispersions by diffusion NMR and time-dependant 1H-NMR-imaging profiles. The dispersion clay concentration was varied between 0.3 and 0.7 vol%. After magnetic alignment of the clay particles in these dispersions a maximum difference of 20% was measured between the parallel and perpendicular self-diffusion coefficients in the dispersion with 0.7 vol% clay. A method was developed to measure water diffusion within the dispersion in the absence of a magnetic field (random clay orientation) as this is not possible with standard diffusion NMR. However, no significant difference in self-diffusion coefficient between random and aligned dispersions could be observed.
|
|
| 7. |
- Abtahi, Farhad, 1981-, et al.
(författare)
-
Development and preliminary evaluation of an Android based heart rate variability biofeedback system
- 2014
-
Ingår i: Engineering in Medicine and Biology Society (EMBC), 2014 36th Annual International Conference of the IEEE. - : IEEE. - 9781424479290 ; 2014, s. 3382-5
-
Konferensbidrag (refereegranskat)abstract
- The reduced Heart Rate Variability (HRV) is believed to be associated with several diseases such as congestive heart failure, diabetes and chronic kidney diseases (CKD). In these cases, HRV biofeedback may be a potential intervention method to increase HRV which in turn is beneficial to these patients. In this work, a real-time Android biofeedback application based on a Bluetooth enabled ECG and thoracic electrical bioimpedance (respiration) measurement device has been developed. The system performance and usability have been evaluated in a brief study with eight healthy volunteers. The result demonstrates real-time performance of system and positive effects of biofeedback training session by increased HRV and reduced heart rate. Further development of the application and training protocol is ongoing to investigate duration of training session to find an optimum length and interval of biofeedback sessions to use in potential interventions.
|
|
| 8. |
- Acquaviva, Alessandro, 1987, et al.
(författare)
-
Computationally Efficient Modeling of Electrical Machines With Cooling Jacket
- 2019
-
Ingår i: IEEE Transactions on Transportation Electrification. - : IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC. - 2332-7782. ; 5:3, s. 618-629
-
Tidskriftsartikel (refereegranskat)abstract
- Modeling of electrical machines is a multiphysics problem. Depending on the phenomena of interest and the computational time constraint, this can be done at different levels of detail. In this article, the main approaches to model the thermal behavior of electrical machines with a liquid cooled casing around the stator (often referred to as cooling jacket) are analyzed and a novel approach is presented. The proposed method aims at creating computationally efficient 3-D multiphysics models of electrical machines with liquid cooled jacket. This model is based on the assumption of a fully developed flow in the cooling jacket which allows to scale the computational fluid dynamics (CFD) simulation to 1-D. The slot with a two layer concentrated winding and potting material is modeled using a composite material comprising of both the conductors and slot filler. Similarly, a unified material is used to model the end-windings. Experimental results on a traction machine for vehicle applications are presented showing good agreement with the simulations. Also, a comparison with a 3-D CFD is presented to verify the pressure drop in the pipe bend. Finally, the model is used to simulate a dynamic load cycle, which would be computationally extremely demanding with combined 3-D CFD and thermal FEA of the machine and its cooling.
|
|
| 9. |
- Adiels, Martin, 1976, et al.
(författare)
-
Kinetic Studies to Elucidate Impaired Metabolism of Triglyceride-rich Lipoproteins in Humans.
- 2015
-
Ingår i: Frontiers in Physiology. - : Frontiers Media SA. - 1664-042X. ; 6:NOV, s. 342-
-
Forskningsöversikt (refereegranskat)abstract
- To develop novel strategies for prevention and treatment of dyslipidemia, it is essential to understand the pathophysiology of dyslipoproteinemia in humans. Lipoprotein metabolism is a complex system in which abnormal concentrations of various lipoprotein particles can result from alterations in their rates of production, conversion, and/or catabolism. Traditional methods that measure plasma lipoprotein concentrations only provide static estimates of lipoprotein metabolism and hence limited mechanistic information. By contrast, the use of tracers labeled with stable isotopes and mathematical modeling, provides us with a powerful tool for probing lipid and lipoprotein kinetics in vivo and furthering our understanding of the pathogenesis of dyslipoproteinemia.
|
|
| 10. |
- Aggerstam, Thomas, et al.
(författare)
-
GaN/AlN multiple quantum well structures grown by MBE on GaN templates for 1.55 mu m intersubband absorption
- 2007
-
Ingår i: Quantum Sensing and Nanophotonic Devices IV. - : SPIE. - 9780819465924 ; 6479, s. 64791E-
-
Konferensbidrag (refereegranskat)abstract
- We have used MBE to grow MQW structures on MOVPE GaN/sapphire templates. The MQW devices are intended for high speed intersubband electroabsorption modulator devices operating at 1.55-mu m. The GaN/AlN multiple quantum well material was systematically studied regarding the surface morphology, structural characterization and optical property by atomic force microscopy, X-ray diffraction and Fourier transform infrared spectroscopy, respectively. The intersubband resonance energy was also calculated considering many-body effects in n-type doped structures. The multiple quantum well structure showed superior performance in terms of linewidth when grown on GaN templates as compared on sapphire. GaN quantum well and AlN barriers with a thickness of 3.3 and 4.2 nm respectively resulted in FWHM of the intersubband absorption peak as low as 93 meV at an absorption energy of 700 meV. This is promising for intersubband modulator applications.
|
|
