| 1. |
- Argillander, Joakim, et al.
(författare)
-
Quantum random number generation based on a perovskite light emitting diode
- 2023
-
Ingår i: Communications Physics. - : NATURE PORTFOLIO. - 2399-3650. ; 6:1
-
Tidskriftsartikel (refereegranskat)abstract
- True random number generation is not thought to be possible using a classical approach but by instead exploiting quantum mechanics genuine randomness can be achieved. Here, the authors demonstrate a certified quantum random number generation using a metal-halide perovskite light emitting diode as a source of weak coherent polarisation states randomly producing an output of either 0 or 1. The recent development of perovskite light emitting diodes (PeLEDs) has the potential to revolutionize the fields of optical communication and lighting devices, due to their simplicity of fabrication and outstanding optical properties. Here we demonstrate that PeLEDs can also be used in the field of quantum technologies by implementing a highly-secure quantum random number generator (QRNG). Modern QRNGs that certify their privacy are posed to replace classical random number generators in applications such as encryption and gambling, and therefore need to be cheap, fast and with integration capabilities. Using a compact metal-halide PeLED source, we generate random numbers, which are certified to be secure against an eavesdropper, following the quantum measurement-device-independent scenario. The obtained generation rate of more than 10 Mbit s(-1), which is already comparable to commercial devices, shows that PeLEDs can work as high-quality light sources for quantum information tasks, thus opening up future applications in quantum technologies.
|
|
| 2. |
- Bai, Sai, et al.
(författare)
-
Colloidal metal halide perovskite nanocrystals: synthesis, characterization, and applications
- 2016
-
Ingår i: Journal of Materials Chemistry C. - : ROYAL SOC CHEMISTRY. - 2050-7526 .- 2050-7534. ; 4:18, s. 3898-3904
-
Tidskriftsartikel (refereegranskat)abstract
- Colloidal metal halide perovskite nanocrystals (NCs) have emerged as promising materials for optoelectronic devices and received considerable attention recently. Their superior photoluminescence (PL) properties provide significant advantages for lighting and display applications. In this Highlight, we discuss recent developments in the design and chemical synthesis of colloidal perovskite NCs, including both organic-inorganic hybrid and all inorganic perovskite NCs. We review the excellent PL properties and current optoelectronic applications of these perovskite NCs. In addition, critical challenges that currently limit the applicability of perovskite NCs are discussed, and prospects for future directions are proposed.
|
|
| 3. |
- Bai, Sai, et al.
(författare)
-
Electrophoretic deposited oxide thin films as charge transporting interlayers for solution-processed optoelectronic devices: the case of ZnO nanocrystals
- 2015
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 5:11, s. 8216-8222
-
Tidskriftsartikel (refereegranskat)abstract
- A promising fabrication method of electron transporting interlayers for solution-processed optoelectronic devices by electrophoretic deposition (EPD) of colloidal zinc oxide (ZnO) nanocrystals was demonstrated. A low voltage of 3-5 V and a short deposition time of 40 s at room temperature were found to be sufficient to generate dense and uniform ZnO thin films. The EPD ZnO nanocrystal films were applied as ETLs for inverted organic solar cell and polymer light emitting diodes (PLEDs). By optimizing the EPD processing of ZnO nanocrystal electron transporting layers (ETLs), inverted organic solar cells based on [3,4-b]-thiophene/benzodithiophene (PTB7): [6-6]-phenyl-C71-butyric acid methyl ester (PC71BM) and poly(3-hexylthiophene) (P3HT): [6-6]-phenyl-C-61-butyric acid methyl ester (PC61BM) with an average PCE of 8.4% and 4.0% were fabricated. In combination with the PLEDs and flexible devices results, we conclude that the EPD processed ZnOnanocrystal thin films can serve as high quality ETLs for solution-processed optoelectronic devices.
|
|
| 4. |
- Bai, Sai, et al.
(författare)
-
Ethanedithiol Treatment of Solution-Processed ZnO Thin Films: Controlling the Intragap States of Electron Transporting Interlayers for Efficient and Stable Inverted Organic Photovoltaics
- 2015
-
Ingår i: Advanced Energy Materials. - : Wiley-VCH Verlag. - 1614-6832 .- 1614-6840. ; 5:5, s. 1401606-
-
Tidskriftsartikel (refereegranskat)abstract
- The surface defects of solution-processed ZnO films lead to various intragap states. When the solution-processed ZnO films are used as electron transport interlayers (ETLs) in inverted organic solar cells, the intragap states act as interfacial recombination centers for photogenerated charges and thereby degrade the device performance. Here, a simple passivation method based on ethanedithiol (EDT) treatment is demonstrated, which effectively removes the surface defects of the ZnO nanocrystal films by forming zinc ethanedithiolates. The passivation by EDT treatment modulates the intragap states of the ZnO films and introduces a new intragap band. When the EDT-treated ZnO nanocrystal films are used as ETLs in inverted organic solar cells, both the power conversion efficiency and stability of the devices are improved. The control studies show that the solar cells with EDT-treated ZnO films exhibit reduced charge recombination rates and enhanced charge extraction properties. These features are consistent with the fact that the modulation of the intragap states results in reduction of interfacial recombination as well as the improved charge selectivity and electron transport properties of the ETLs. It is further demonstrated that the EDT treatment-based passivation method can be extended to ZnO films deposited from sol-gel precursors.
|
|
| 5. |
|
|
| 6. |
- Bai, Sai, et al.
(författare)
-
Planar perovskite solar cells with long-term stability using ionic liquid additives
- 2019
-
Ingår i: Nature. - : Nature Publishing Group. - 0028-0836 .- 1476-4687. ; 571:7764, s. 245-250
-
Tidskriftsartikel (refereegranskat)abstract
- Solar cells based on metal halide perovskites are one of the most promising photovoltaic technologies(1-4). Over the past few years, the long-term operational stability of such devices has been greatly improved by tuning the composition of the perovskites(5-9), optimizing the interfaces within the device structures(10-13), and using new encapsulation techniques(14,15). However, further improvements are required in order to deliver a longer-lasting technology. Ion migration in the perovskite active layer-especially under illumination and heat-is arguably the most difficult aspect to mitigate(16-18). Here we incorporate ionic liquids into the perovskite film and thence into positive-intrinsic-negative photovoltaic devices, increasing the device efficiency and markedly improving the long-term device stability. Specifically, we observe a degradation in performance of only around five per cent for the most stable encapsulated device under continuous simulated full-spectrum sunlight for more than 1,800 hours at 70 to 75 degrees Celsius, and estimate that the time required for the device to drop to eighty per cent of its peak performance is about 5,200 hours. Our demonstration of long-term operational, stable solar cells under intense conditions is a key step towards a reliable perovskite photovoltaic technology.
|
|
| 7. |
- Bai, Sai, et al.
(författare)
-
Reproducible Planar Heterojunction Solar Cells Based on One-Step Solution-Processed Methylammonium Lead Halide Perovskites
- 2017
-
Ingår i: Chemistry of Materials. - : AMER CHEMICAL SOC. - 0897-4756 .- 1520-5002. ; 29:1, s. 462-473
-
Tidskriftsartikel (refereegranskat)abstract
- Metal halide perovskites have been demonstrated as one of the most promising materials for low-cost and high-performance photovoltaic applications. However, due to the susceptible crystallization process of perovskite films on planar substrates and the high sensitivity of the physical and optoelectronic nature of the internal interfaces within the devices, researchers in different laboratories still experience poor reproducibility in fabricating efficient perovskite solar cells with planar heterojunction device structures. In this method paper, we present detailed information on the reagents, equipment, and procedures for the fabrication of planar perovskite solar cells in both "regular" n-i-p and "inverted" p-i-n architectures based on one-step solution-processed methylammonium lead triiodide (MAPbI(3)) perovskite films. We discuss key parameters affecting the crystallization of perovskite and the device interfaces. This method paper will provide a guideline for the reproducible fabrication of planar heterojunction solar cells based on MAPbI3 perovskite films. We believe that the shared experience on MA-based perovskite films and planar solar cells will be also useful for the optimization process of perovskites with varied compositions, and other emerging perovskite-based optoelectronic devices.
|
|
| 8. |
- Bai, Yang, et al.
(författare)
-
Geometry design of tethered small-molecule acceptor enables highly stable and efficient polymer solar cells
- 2023
-
Ingår i: Nature Communications. - : NATURE PORTFOLIO. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- With the power conversion efficiency of binary polymer solar cells dramatically improved, the thermal stability of the small-molecule acceptors raised the main concerns on the device operating stability. Here, to address this issue, thiophene-dicarboxylate spacer tethered small-molecule acceptors are designed, and their molecular geometries are further regulated via the thiophene-core isomerism engineering, affording dimeric TDY-alpha with a 2, 5-substitution and TDY-beta with 3, 4-substitution on the core. It shows that TDY-alpha processes a higher glass transition temperature, better crystallinity relative to its individual small-molecule acceptor segment and isomeric counterpart of TDY-beta, and amore stablemorphology with the polymer donor. As a result, the TDY-alpha based device delivers a higher device efficiency of 18.1%, and most important, achieves an extrapolated lifetime of about 35000 hours that retaining 80% of their initial efficiency. Our result suggests that with proper geometry design, the tethered small-molecule acceptors can achieve both high device efficiency and operating stability.
|
|
| 9. |
- Bakulin, Artem A., et al.
(författare)
-
Morphology, Temperature, and Field Dependence Separation in High-Efficiency Solar Cells Based on Polyquinoxaline Copolymer
- 2016
-
Ingår i: The Journal of Physical Chemistry C. - : AMER CHEMICAL SOC. - 1932-7447 .- 1932-7455. ; 120:8, s. 4219-4226
-
Tidskriftsartikel (refereegranskat)abstract
- Charge separation and recombination are key processes determining the performance of organic optoelectronic devices. Here we combine photoluminescence and photovoltaic characterization of organic solar cell devices with ultrafast multipulse photocurrent spectroscopy to investigate charge generation mechanisms in the organic photovoltaic devices based on a blend of an alternating polyquinoxaline copolymer with fullerene. The combined use of these techniques enables the determination of the contributions of geminate and bimolecular processes to the solar cell performance. We observe that charge separation is not a temperature-activated process in the studied materials. At the same time, the generation of free charges shows a dear external field and morphology dependence. This indicates that the critical step of charge separation involves the nonequilibrium state that is formed at early times after photoexcitation, when the polaronic localization is not yet complete. This work reveals new aspects of molecular level charge dynamics in the organic light-conversion systems.
|
|
| 10. |
- Bao, Chunxiong, et al.
(författare)
-
A multifunctional display based on photo-responsive perovskite light-emitting diodes
- 2024
-
Ingår i: NATURE ELECTRONICS. - : NATURE PORTFOLIO. - 2520-1131.
-
Tidskriftsartikel (refereegranskat)abstract
- Current display screens are typically only used for information display, but can have a range of different sensors integrated into them for functions such as touch control, ambient light sensing and fingerprint sensing. Photo-responsive light-emitting diodes (LEDs), which can display information and respond to light excitation, could be used to develop future ultra-thin and large screen-to-body ratio screens. However, photo-response is difficult to achieve with conventional display technologies. Here, we report a multifunctional display that uses photo-responsive metal halide perovskite LEDs as pixels. The perovskite LED display can be simultaneously used as a touch screen, ambient light sensor and image sensor (including for fingerprint drawing) without integrating any additional sensors. The light-to-electricity conversion efficiency of the pixels also allow the display to act as a photovoltaic device that can charge the equipment. Photo-responsive metal halide perovskite light-emitting diodes can be used to create a multifunctional display that can function as a touch screen, ambient light sensor and image sensor.
|
|
