| 1. |
- Agostini, Marco, 1987, et al.
(författare)
-
Free-Standing 3D-Sponged Nanofiber Electrodes for Ultrahigh-Rate Energy-Storage Devices
- 2018
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 10:40, s. 34140-34146
-
Tidskriftsartikel (refereegranskat)abstract
- We have designed a self-standing anode built-up from highly conductive 3D-sponged nanofibers, that is, with no current collectors, binders, or additional conductive agents. The small diameter of the fibers combined with an internal spongelike porosity results in short distances for lithium-ion diffusion and 3D pathways that facilitate the electronic conduction. Moreover, functional groups at the fiber surfaces lead to the formation of a stable solid-electrolyte interphase. We demonstrate that this anode enables the operation of Li-cells at specific currents as high as 20 A g-1 (approx. 50C) with excellent cycling stability and an energy density which is >50% higher than what is obtained with a commercial graphite anode.
|
|
| 2. |
- Agostini, Marco, 1987, et al.
(författare)
-
Rational Design of Low Cost and High Energy Lithium Batteries through Tailored Fluorine-free Electrolyte and Nanostructured S/C Composite
- 2018
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 11:17, s. 2981-2986
-
Tidskriftsartikel (refereegranskat)abstract
- We report a new Li–S cell concept based on an optimized F-free catholyte solution and a high loading nanostructured C/S composite cathode. The Li2S8present in the electrolyte ensures both buffering against active material dissolution and Li+conduction. The high S loading is obtained by confining elemental S (≈80 %) in the pores of a highly ordered mesopores carbon (CMK3). With this concept we demonstrate stabilization of a high energy density and excellent cycling performance over 500 cycles. This Li–S cell has a specific capacity that reaches over 1000 mA h g−1, with an overall S loading of 3.6 mg cm−2and low electrolyte volume (i.e., 10 μL cm−2), resulting in a practical energy density of 365 Wh kg−1. The Li–S system proposed thus meets the requirements for large scale energy storage systems and is expected to be environmentally friendly and have lower cost compared with the commercial Li-ion battery thanks to the removal of both Co and F from the overall formulation.
|
|
| 3. |
- Agostini, Marco, 1987, et al.
(författare)
-
Stabilizing the Performance of High-Capacity Sulfur Composite Electrodes by a New Gel Polymer Electrolyte Configuration
- 2017
-
Ingår i: ChemSusChem. - : Wiley. - 1864-5631 .- 1864-564X. ; 10:17, s. 3490-3496
-
Tidskriftsartikel (refereegranskat)abstract
- Increased pollution and the resulting increase in global warming are drawing attention to boosting the use of renewable energy sources such as solar or wind. However, the production of energy from most renewable sources is intermittent and thus relies on the availability of electrical energy-storage systems with high capacity and at competitive cost. Lithium–sulfur batteries are among the most promising technologies in this respect due to a very high theoretical energy density (1675 mAh g?1) and that the active material, sulfur, is abundant and inexpensive. However, a so far limited practical energy density, life time, and the scaleup of materials and production processes prevent their introduction into commercial applications. In this work, we report on a simple strategy to address these issues by using a new gel polymer electrolyte (GPE) that enables stable performance close to the theoretical capacity of a low cost sulfur–carbon composite with high loading of active material, that is, 70 % sulfur. We show that the GPE prevents sulfur dissolution and reduces migration of polysulfide species to the anode. This functional mechanism of the GPE membranes is revealed by investigating both its morphology and the Li-anode/GPE interface at various states of discharge/charge using Raman spectroscopy.
|
|
| 4. |
- Lim, Du Hyun, 1983, et al.
(författare)
-
An Electrospun Nanofiber Membrane as Gel-Based Electrolyte for Room-Temperature Sodium–Sulfur Batteries
- 2018
-
Ingår i: Energy Technology. - : Wiley. - 2194-4296 .- 2194-4288. ; 6:7, s. 1214-1219
-
Tidskriftsartikel (refereegranskat)abstract
- We report on the synthesis and characterization of an electrospun gel polymer electrolyte (GPE) membrane based on polyacrylonitrile nanofibers (PAN) swollen in a polyethylene glycol dimethyl ether/Na-salt electrolyte solution, for application in room temperature sodium–sulfur (Na–S) batteries. The membranes show a high ionic conductivity, wide electrochemical stability window, and good thermal stability. We demonstrate the performance of the membrane in an Na–S cell using a sulfur–carbon nanotubes composite cathode and Na metal as anode. Our results show that the GPE membrane stabilizes the Na metal anode resulting in stable cycling behavior. The capacity of the Na–S cell, using the GPE membrane and operating at room temperature, is approximately 500 mAh g−1over 40 cycles. The selected electrolyte configuration also provides improved safety by replacing the highly reactive sodium perchlorate (NaClO4) salt previously used in literature. All these benefits make the gel-polymer electrolyte membrane a very promising system for application in room-temperature sodium and sodium–sulfur batteries.
|
|
| 5. |
- Lim, Du Hyun, 1983, et al.
(författare)
-
Route to sustainable lithium-sulfur batteries with high practical capacity through a fluorine free polysulfide catholyte and self-standing Carbon Nanofiber membranes
- 2017
-
Ingår i: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322 .- 2045-2322. ; 7:1, s. Article no. 6327 -
-
Tidskriftsartikel (refereegranskat)abstract
- We report on a new strategy to improve the capacity, reduce the manufacturing costs and increase the sustainability of Lithium-Sulfur (LiS) batteries. It is based on a semi-liquid cathode composed of a Li2S8 polysulphide catholyte and a binder-free carbon nanofiber membrane with tailored morphology. The polysulphides in the catholyte have the dual role of active material and providing Li+-conduction, i.e. no traditional Li-salt is used in this cell. The cell is able to deliver an areal capacity as high as 7 mAh cm(-2), twice than that of commercial Lithium-ion batteries (LiBs) and 2-4 times higher than that of state-of-the-art LiS cells. In addition, the battery concept has an improved sustainability from a material point of view by being mainly based on sulfur and carbon and being completely fluorine-free, no fluorinated salt or binders are used, and has potential for upscaling and competitive price. The combination of these properties makes the semi-liquid LiS cell here reported a very promising new concept for practical large-scale energy storage applications.
|
|
