| 1. |
- Lozano, Rafael, et al.
(författare)
-
Measuring progress from 1990 to 2017 and projecting attainment to 2030 of the health-related Sustainable Development Goals for 195 countries and territories: a systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - : Elsevier. - 1474-547X .- 0140-6736. ; 392:10159, s. 2091-2138
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Efforts to establish the 2015 baseline and monitor early implementation of the UN Sustainable Development Goals (SDGs) highlight both great potential for and threats to improving health by 2030. To fully deliver on the SDG aim of “leaving no one behind”, it is increasingly important to examine the health-related SDGs beyond national-level estimates. As part of the Global Burden of Diseases, Injuries, and Risk Factors Study 2017 (GBD 2017), we measured progress on 41 of 52 health-related SDG indicators and estimated the health-related SDG index for 195 countries and territories for the period 1990–2017, projected indicators to 2030, and analysed global attainment. Methods: We measured progress on 41 health-related SDG indicators from 1990 to 2017, an increase of four indicators since GBD 2016 (new indicators were health worker density, sexual violence by non-intimate partners, population census status, and prevalence of physical and sexual violence [reported separately]). We also improved the measurement of several previously reported indicators. We constructed national-level estimates and, for a subset of health-related SDGs, examined indicator-level differences by sex and Socio-demographic Index (SDI) quintile. We also did subnational assessments of performance for selected countries. To construct the health-related SDG index, we transformed the value for each indicator on a scale of 0–100, with 0 as the 2·5th percentile and 100 as the 97·5th percentile of 1000 draws calculated from 1990 to 2030, and took the geometric mean of the scaled indicators by target. To generate projections through 2030, we used a forecasting framework that drew estimates from the broader GBD study and used weighted averages of indicator-specific and country-specific annualised rates of change from 1990 to 2017 to inform future estimates. We assessed attainment of indicators with defined targets in two ways: first, using mean values projected for 2030, and then using the probability of attainment in 2030 calculated from 1000 draws. We also did a global attainment analysis of the feasibility of attaining SDG targets on the basis of past trends. Using 2015 global averages of indicators with defined SDG targets, we calculated the global annualised rates of change required from 2015 to 2030 to meet these targets, and then identified in what percentiles the required global annualised rates of change fell in the distribution of country-level rates of change from 1990 to 2015. We took the mean of these global percentile values across indicators and applied the past rate of change at this mean global percentile to all health-related SDG indicators, irrespective of target definition, to estimate the equivalent 2030 global average value and percentage change from 2015 to 2030 for each indicator. Findings: The global median health-related SDG index in 2017 was 59·4 (IQR 35·4–67·3), ranging from a low of 11·6 (95% uncertainty interval 9·6–14·0) to a high of 84·9 (83·1–86·7). SDG index values in countries assessed at the subnational level varied substantially, particularly in China and India, although scores in Japan and the UK were more homogeneous. Indicators also varied by SDI quintile and sex, with males having worse outcomes than females for non-communicable disease (NCD) mortality, alcohol use, and smoking, among others. Most countries were projected to have a higher health-related SDG index in 2030 than in 2017, while country-level probabilities of attainment by 2030 varied widely by indicator. Under-5 mortality, neonatal mortality, maternal mortality ratio, and malaria indicators had the most countries with at least 95% probability of target attainment. Other indicators, including NCD mortality and suicide mortality, had no countries projected to meet corresponding SDG targets on the basis of projected mean values for 2030 but showed some probability of attainment by 2030. For some indicators, including child malnutrition, several infectious diseases, and most violence measures, the annualised rates of change required to meet SDG targets far exceeded the pace of progress achieved by any country in the recent past. We found that applying the mean global annualised rate of change to indicators without defined targets would equate to about 19% and 22% reductions in global smoking and alcohol consumption, respectively; a 47% decline in adolescent birth rates; and a more than 85% increase in health worker density per 1000 population by 2030. Interpretation: The GBD study offers a unique, robust platform for monitoring the health-related SDGs across demographic and geographic dimensions. Our findings underscore the importance of increased collection and analysis of disaggregated data and highlight where more deliberate design or targeting of interventions could accelerate progress in attaining the SDGs. Current projections show that many health-related SDG indicators, NCDs, NCD-related risks, and violence-related indicators will require a concerted shift away from what might have driven past gains—curative interventions in the case of NCDs—towards multisectoral, prevention-oriented policy action and investments to achieve SDG aims. Notably, several targets, if they are to be met by 2030, demand a pace of progress that no country has achieved in the recent past. The future is fundamentally uncertain, and no model can fully predict what breakthroughs or events might alter the course of the SDGs. What is clear is that our actions—or inaction—today will ultimately dictate how close the world, collectively, can get to leaving no one behind by 2030.
|
|
| 2. |
- Stanaway, Jeffrey D., et al.
(författare)
-
Global, regional, and national comparative risk assessment of 84 behavioural, environmental and occupational, and metabolic risks or clusters of risks for 195 countries and territories, 1990-2017: A systematic analysis for the Global Burden of Disease Study 2017
- 2018
-
Ingår i: The Lancet. - 1474-547X .- 0140-6736. ; 392:10159, s. 1923-1994
-
Tidskriftsartikel (refereegranskat)abstract
- Background The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2017 comparative risk assessment (CRA) is a comprehensive approach to risk factor quantification that offers a useful tool for synthesising evidence on risks and risk-outcome associations. With each annual GBD study, we update the GBD CRA to incorporate improved methods, new risks and risk-outcome pairs, and new data on risk exposure levels and risk- outcome associations. Methods We used the CRA framework developed for previous iterations of GBD to estimate levels and trends in exposure, attributable deaths, and attributable disability-adjusted life-years (DALYs), by age group, sex, year, and location for 84 behavioural, environmental and occupational, and metabolic risks or groups of risks from 1990 to 2017. This study included 476 risk-outcome pairs that met the GBD study criteria for convincing or probable evidence of causation. We extracted relative risk and exposure estimates from 46 749 randomised controlled trials, cohort studies, household surveys, census data, satellite data, and other sources. We used statistical models to pool data, adjust for bias, and incorporate covariates. Using the counterfactual scenario of theoretical minimum risk exposure level (TMREL), we estimated the portion of deaths and DALYs that could be attributed to a given risk. We explored the relationship between development and risk exposure by modelling the relationship between the Socio-demographic Index (SDI) and risk-weighted exposure prevalence and estimated expected levels of exposure and risk-attributable burden by SDI. Finally, we explored temporal changes in risk-attributable DALYs by decomposing those changes into six main component drivers of change as follows: (1) population growth; (2) changes in population age structures; (3) changes in exposure to environmental and occupational risks; (4) changes in exposure to behavioural risks; (5) changes in exposure to metabolic risks; and (6) changes due to all other factors, approximated as the risk-deleted death and DALY rates, where the risk-deleted rate is the rate that would be observed had we reduced the exposure levels to the TMREL for all risk factors included in GBD 2017.
|
|
| 3. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
- Köhler, Elof, 1980, et al.
(författare)
-
Impact of designed asymmetries on the effective bandwidth of a backfolded piezoelectric energy harvester
- 2019
-
Ingår i: Sensors and Actuators, A: Physical. - : Elsevier BV. - 0924-4247. ; 292, s. 77-89
-
Tidskriftsartikel (refereegranskat)abstract
- For the successful realization of autonomous wireless sensors, they will have to be able to harvest energy from their surroundings. Vibrational energy harvesting is one possible power source for wireless sensors, since vibrations are abundant in many environments. In order to make vibrational energy harvesters more useful, a broad bandwidth is desirable since many vibrations are stochastic in nature. In this paper we implement asymmetry to a backfolded piezoelectric energy harvester to achieve broader effective bandwidth with maintained power output. The optimized harvester achieves a minimum of 2.75 V in the frequency range 92–162 Hz with peak power output of 1.80 mW. Asymmetry based on different lengths of the conjoined cantilevers is experimentally and numerically shown to have the largest impact on the bandwidth, compared to the impact of modified mass loadings.
|
|
| 5. |
- Li, Qi, 1990, et al.
(författare)
-
Finger Number and Device Performance: A Case Study of Reduced Graphene Oxide Microsupercapacitors
- 2021
-
Ingår i: Physica Status Solidi (B): Basic Research. - : Wiley. - 1521-3951 .- 0370-1972. ; 258:2
-
Tidskriftsartikel (refereegranskat)abstract
- Microsupercapacitors (MSCs) are recognized as suitable energy storage devices for the internet of things (IoTs) applications. Herein is described the work conducted to assess the areal energy and power densities of MSCs with 2, 10, 20, and 40 interdigital finger electrodes on a fixed device footprint area (the finger interspacing is fixed at 40 μm, and the finger width and length are allowed to vary to fit the footprint area). The MSCs are based on reduced graphene oxide (rGO) materials and fabricated with a spin-coating and etch method. The performance evaluation indicates a strong dependency of areal capacitance and energy density on the number of fingers, and the maximum (impedance match) power density is also influenced to a relatively large extent, whereas the average power density is not sensitive to the configuration parameters in the present evaluation settings (scan rate 20–200 mV s−1 and current density of 100 μA cm−2). For the rGO-based devices, the equivalent distributed resistance may play an important role in determining the device resistance and power-related performance.
|
|
| 6. |
- Smith, Anderson David, 1985, et al.
(författare)
-
Toward CMOS compatible wafer-scale fabrication of carbon-based microsupercapacitors for IoT
- 2018
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 1052:1
-
Konferensbidrag (refereegranskat)abstract
- This work presents a wafer-scale method of microsupercapacitor (MSC) fabrication. Deposition of the electrode precursor, i.e. graphene oxide, is accomplished through spin-coating which allows for potential application in CMOS compatible processes for future integrated on-chip energy storage systems. Our MSCs have an areal capacitance of 0.4 mF/cm2at 10 μA, which is a very promising result. Further, the MSC has good rate capability as its capacitance decreases by only 0.03 mF/cm2when the current increases to 50 μA. The MSCs have a maximum energy density of 0.04 μWh/cm2and a maximum power density as high as 96 μW/cm2. Additionally, the wafer-scale process demonstrates industrial viability.
|
|
| 7. |
- Staaf, Henrik, 1976, et al.
(författare)
-
Achieving increased bandwidth for 4 degree of freedom self-tuning energy harvester
- 2018
-
Ingår i: Journal of Sound and Vibration. - : Elsevier BV. - 1095-8568 .- 0022-460X. ; 420, s. 165-173
-
Tidskriftsartikel (refereegranskat)abstract
- The frequency response of a self-tuning energy harvester composed of two piezoelectric cantilevers connected by a middle beam with a sliding mass is investigated. Measurements show that incorporation of a free-sliding mass increases the bandwidth. Using an analytical model, the system is explained through close investigation of the resonance modes. Resonance mode behavior further suggests that, by breaking the symmetry of the system, even broader bandwidths are achievable.
|
|
| 8. |
- Staaf, Henrik, 1976, et al.
(författare)
-
Effective piezoelectric energy harvesting with bandwidth enhancement by assymetry augmented self-tuning of conjoined cantilevers
- 2019
-
Ingår i: International Journal of Mechanical Sciences. - : Elsevier BV. - 0020-7403. ; 150, s. 1-11
-
Tidskriftsartikel (refereegranskat)abstract
- Vibrational energy harvesting offers a potential power supply for future intelligent wireless sensors. In order to make vibrational energy harvesters more useful, a broad bandwidth is desirable since many vibrations are stochastic in nature. In this paper we use a piezoelectric self-tuning energy harvester to demonstrate the importance of designing for asymmetry in a system of conjoined cantilevers. Asymmetry is achieved by varying the piezoelectric cantilever lengths as well as the proof mass weights. In addition to bandwidth broadening, a self-tuning effect is experimentally demonstrated by a sliding mass. The measurement results confirm previous model predictions.
|
|
| 9. |
- Staaf, Henrik, 1976, et al.
(författare)
-
Verification of Self-Tuning 4DOF Piezoelectric Energy Harvester with Enhanced Bandwidth
- 2018
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 1052:To be published in Journal of Physics Conference S
-
Konferensbidrag (refereegranskat)abstract
- In this paper, we present an analytical model to predict enhanced bandwidth for a piezoelectric energy harvester with self-tuning, accomplished by a sliding mass. The model predicts that by implementing asymmetry of different piezoelectric cantilever lengths , the bandwidth can theoretically approach 60 Hz. Validation measurements demonstrate an increased 3dB bandwidth up to 21 Hz with 150 mW, by configuration 23/17 mm in open length – providing sufficient power for a ZigBee to continually transmit.
|
|
| 10. |
- Vyas, Agin, 1992, et al.
(författare)
-
Enhanced Electrode Deposition for On-Chip Integrated Micro-Supercapacitors by Controlled Surface Roughening
- 2020
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 5:10, s. 5219-5228
-
Tidskriftsartikel (refereegranskat)abstract
- On-chip micro-supercapacitors (MSCs), integrated with energy harvesters, hold substantial promise for developing self-powered wireless sensor systems. However, MSCs have conventionally been manufactured through techniques incompatible with semiconductor fabrication technology, the most significant bottleneck being the electrode deposition technique. Utilization of spin-coating for electrode deposition has shown potential to deliver several complementary metal-oxide-semiconductor (CMOS)-compatible MSCs on a silicon substrate. Yet, their limited electrochemical performance and yield over the substrate have remained challenges obstructing their subsequent integration. We report a facile surface roughening technique for improving the wafer yield and the electrochemical performance of CMOS-compatible MSCs, specifically for reduced graphene oxide as an electrode material. A 4 nm iron layer is deposited and annealed on the wafer substrate to increase the roughness of the surface. In comparison to standard nonroughened MSCs, the increase in surface roughness leads to a 78% increased electrode thickness, 21% improvement in mass retention, 57% improvement in the uniformity of the spin-coated electrodes, and a high yield of 87% working devices on a 2″ silicon substrate. Furthermore, these improvements directly translate to higher capacitive performance with enhanced rate capability, energy, and power density. This technique brings us one step closer to fully integrable CMOS-compatible MSCs in self-powered systems for on-chip wireless sensor electronics. ©
|
|
