SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Andersson Sunden E) "

Sökning: WFRF:(Andersson Sunden E)

Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Joffrin, E., et al. (författare)
  • Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
  • 2019
  • Ingår i: Nuclear Fusion. - : IOP PUBLISHING LTD. - 0029-5515 .- 1741-4326. ; 59:11
  • Forskningsöversikt (refereegranskat)abstract
    • For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
  •  
2.
  •  
3.
  •  
4.
  • Abel, I, et al. (författare)
  • Overview of the JET results with the ITER-like wall
  • 2013
  • Ingår i: Nuclear Fusion. - 0029-5515 .- 1741-4326. ; 53:10, s. 104002-
  • Tidskriftsartikel (refereegranskat)abstract
    • Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
  •  
5.
  • Romanelli, F, et al. (författare)
  • Overview of the JET results
  • 2011
  • Ingår i: Nuclear Fusion. - 0029-5515 .- 1741-4326. ; 51:9
  • Tidskriftsartikel (refereegranskat)abstract
    • Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
  •  
6.
  • Joffrin, E., et al. (författare)
  • Impact of divertor geometry on H-mode confinement in the JET metallic wall
  • 2017
  • Ingår i: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:8
  • Tidskriftsartikel (refereegranskat)abstract
    • Recent experiments with the ITER-like wall have demonstrated that changes in divertor strike point position are correlated with strong modification of the global energy confinement. The impact on energy confinement is observable both on the pedestal confinement and core normalised gradients. The corner configuration shows an increased core density gradient length and ion pressure indicating a better ion confinement. The study of neutral re-circulation indicates the neutral pressure in the main chamber varies inversely with the energy confinement and a correlation between the pedestal total pressure and the neutral pressure in the main chamber can be established. It does not appear that charge exchange losses nor momentum losses could explain this effect, but it may be that changes in edge electric potential are playing a role at the plasma edge. This study emphasizes the importance of the scrape-off layer (SOL) conditions on the pedestal and core confinement.
  •  
7.
  • Frassinetti, Lorenzo, et al. (författare)
  • Dimensionless scalings of confinement, heat transport and pedestal stability in JET-ILW and comparison with JET-C
  • 2017
  • Ingår i: Plasma Physics and Controlled Fusion. - Culham Sci Ctr, EUROfus Consortium, JET, Abingdon OX14 3DB, Oxon, England. [Frassinetti, L.; Stefanikova, E.] KTH Royal Inst Technol, Div Fus Plasma Phys, SE-10691 Stockholm, Sweden. [Saarelma, S.; Lomas, P.; Rimini, F.; Drewelow, P.; Flanagan, J.; Garzotti, L.; Giroud, C.; Hawks, N.; Joffrin, E.; Kempenaars, M.; Kim, Hyun-Tae; Kruezi, U.; Lupelli, I.; Maggi, C. F.; Menmuir, S.; Romanelli, M.] Culham Sci Ctr, CCFE, Abingdon OX14 3DB, Oxon, England. [Nunes, I.; Meneses, L.] Univ Lisbon, Inst Plasmas & Fusao Nucl, IST, P-1049001 Lisbon, Portugal. [Beurskens, M. N. A.] Max Planck Inst Plasma Phys, D-17491 Greifswald, Germany. [Boom, J. E.] Max Planck Inst Plasma Phys, Boltzmannstr 2, D-85748 Garching, Germany. [de la Luna, E.] CIEMAT, Lab Nacl Fus, Madrid 28040, Spain. [Delabie, E.] Oak Ridge Natl Lab, Oak Ridge, TN 37831 USA. [Loarte, A.] ITER Org, Plasma Operat Directorate, F-13115 St Paul Les Durance, France. [Lomanowski, B.] Aalto Univ, TEKES, Espoo, Finland. [Bilkova, P.; Peterka, M.] AS CR, Vvi, Inst Plasma Phys, Prague, Czech Republic. [Rachlew, E.] KTH Royal Inst Technol, Dept Phys, SE-10691 Stockholm, Sweden.. - 0741-3335 .- 1361-6587. ; 59:1
  • Tidskriftsartikel (refereegranskat)abstract
    • Three dimensionless scans in the normalized Larmor radius rho*, normalized collisionality nu* and normalized plasma pressure beta have been performed in JET with the ITER-like wall (JET-ILW). The normalized energy confinement and the thermal diffusivity exhibit a scaling with rho* consistent with the earlier results obtained in the carbon wall JET (JET-C) and with a gyro-Bohm scaling. In the pedestal, experimental results show that the stability is not dependent on rho*, qualitatively in agreement with the peeling-ballooning (P-B) model. The nu* dimensionless scaling shows that JET-ILW normalized confinement has a stronger dependence on collisionality than JET-C. This leads to a reduction of the difference in the confinement between JET-ILW and JET-C to approximate to 10% at low nu*. The pedestal stability shows an improvement with decreasing nu*. This is ascribed to the increase of the bootstrap current, to the reduction of the pedestal width and to the reduction of the relative shift between pedestal density and temperature position. The beta dimensionless scan shows that, at low collisionality, JET-ILW normalized confinement has no clear dependence with beta, in agreement with part of the earlier scalings. At high collisionality, a reduction of the normalized confinement with increasing beta is observed. This behaviour is driven mainly by the pedestal where the stability is reduced with increasing beta. The P-B analysis shows that the stability reduction with increasing beta at high nu* is due to the destabilizing effect of the increased relative shift.
  •  
8.
  • Frassinetti, Lorenzo, et al. (författare)
  • Global and pedestal confinement and pedestal structure in dimensionless collisionality scans of low-triangularity H-mode plasmas in JET-ILW
  • 2017
  • Ingår i: Nuclear Fusion. - 0029-5515 .- 1741-4326. ; 57:1
  • Tidskriftsartikel (refereegranskat)abstract
    • A dimensionless collisionality scan in low-triangularity plasmas in the Joint European Torus with the ITER-like wall (JET-ILW) has been performed. The increase of the normalized energy confinement (defined as the ratio between thermal energy confinement and Bohm confinement time) with decreasing collisionality is observed. Moreover, at low collisionality, a confinement factor H-98, comparable to JET-C, is achieved. At high collisionality, the low normalized confinement is related to a degraded pedestal stability and a reduction in the density-profile peaking. The increase of normalized energy confinement is due to both an increase in the pedestal and in the core regions. The improvement in the pedestal is related to the increase of the stability. The improvement in the core is driven by (i) the core temperature increase via the temperature-profile stiffness and by (ii) the density-peaking increase driven by the low collisionality. Pedestal stability analysis performed with the ELITE (edge-localized instabilities in tokamak equilibria) code has a reasonable qualitative agreement with the experimental results. An improvement of the pedestal stability with decreasing collisionality is observed. The improvement is ascribed to the reduction of the pedestal width, the increase of the bootstrap current and the reduction of the relative shift between the positions of the pedestal density and pedestal temperature. The EPED1 model predictions for the pedestal pressure height are qualitatively well correlated with the experimental results. Quantitatively, EPED1 overestimates the experimental pressure by 15-35%. In terms of the pedestal width, a correct agreement (within 10-15%) between the EPED1 and the experimental width is found at low collisionality. The experimental pedestal width increases with collisionality. Nonetheless, an extrapolation to low-collisionality values suggests that the width predictions from the KBM constraint are reasonable for ITER.
  •  
9.
  •  
10.
  • Hellesen, Carl, et al. (författare)
  • Validation of TRANSP Simulations Using Neutron emission Spectroscopy with Dual Sight Lines
  • 2008
  • Ingår i: Review of Scientific Instruments. - 0034-6748 .- 1089-7623. ; 79:10, s. 10E510-
  • Tidskriftsartikel (refereegranskat)abstract
    • A method to generate modeled neutron spectra from bulk and fast ion distributions simulated by TRANSP has been developed. In this paper, modeled data generated from fuel ion distrubutions modeled with TRANSP is compared to measured data from two neutron spectrometers with different lines of sight; TOFOR with a radial one and the MPRu with a tangential one. The information obtained from the analysis of the measured neutron spectra such as the relative intensity of the emission from different ion populations places additional constraints on the simulation and can be used to adjust the parameters of the simulation.
  •  
Skapa referenser, mejla, bekava och länka
Typ av publikation
tidskriftsartikel (113)
konferensbidrag (14)
rapport (9)
forskningsöversikt (4)
annan publikation (1)
Typ av innehåll
refereegranskat (130)
populärvet., debatt m.m. (9)
övrigt vetenskapligt (2)
Författare/redaktör
Weiszflog, Matthias (113)
Conroy, Sean (111)
Ericsson, Göran (110)
Hjalmarsson, Anders (104)
Andersson Sundén, Er ... (103)
Cecconello, Marco (102)
visa fler...
Zychor, I (100)
Possnert, Göran, 195 ... (97)
Sjöstrand, Henrik, 1 ... (97)
Eriksson, Jacob, Dr, ... (95)
Hellesen, Carl, 1980 ... (91)
Skiba, Mateusz, 1985 ... (89)
Dzysiuk, Nataliia (88)
Binda, Federico, 198 ... (86)
Frassinetti, Lorenzo (64)
Rubel, Marek (64)
Petersson, Per (58)
Asp, E (57)
Bykov, Igor (49)
Hellsten, Torbjörn (48)
Weckmann, Armin (48)
Menmuir, Sheena (46)
Rachlew, Elisabeth, ... (46)
Ström, Petter (46)
Bergsåker, Henric (45)
Elevant, Thomas (40)
Ivanova, Darya (40)
Johnson, Thomas (37)
Hellesen, C (30)
Tardocchi, M (30)
Garcia Carrasco, Alv ... (30)
Gorini, G (29)
Andersson Sunden, E. (29)
Ericsson, G (26)
Giacomelli, L (26)
Conroy, S (25)
Ronchi, E (25)
Weiszflog, M (23)
Widdowson, A. (23)
Tholerus, Emmi (21)
Gatu Johnson, M (21)
Sjöstrand, H (20)
Garcia-Carrasco, Alv ... (19)
Källne, J (19)
Hjalmarsson, A. (18)
Heinola, K (18)
Popovichev, S (18)
Hellesen, Carl (16)
Delabie, E (15)
Giroud, C (15)
visa färre...
Lärosäte
Uppsala universitet (133)
Kungliga Tekniska Högskolan (103)
Chalmers tekniska högskola (7)
Lunds universitet (1)
Språk
Engelska (141)
Forskningsämne (UKÄ/SCB)
Naturvetenskap (116)
Teknik (4)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy