| 1. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 2. |
- André, Ph., et al.
(författare)
-
Probing the cold magnetised Universe with SPICA-POL (B-BOP)
- 2019
-
Ingår i: Publications Astronomical Society of Australia. - : Cambridge University Press (CUP). - 1323-3580 .- 1448-6083. ; 36
-
Forskningsöversikt (refereegranskat)abstract
- Space Infrared Telescope for Cosmology and Astrophysics (SPICA), the cryogenic infrared space telescope recently pre-selected for a 'Phase A' concept study as one of the three remaining candidates for European Space Agency (ESA's) fifth medium class (M5) mission, is foreseen to include a far-infrared polarimetric imager [SPICA-POL, now called B-fields with BOlometers and Polarizers (B-BOP)], which would offer a unique opportunity to resolve major issues in our understanding of the nearby, cold magnetised Universe. This paper presents an overview of the main science drivers for B-BOP, including high dynamic range polarimetric imaging of the cold interstellar medium (ISM) in both our Milky Way and nearby galaxies. Thanks to a cooled telescope, B-BOP will deliver wide-field 100-350 mu m images of linearly polarised dust emission in Stokes Q and U with a resolution, signal-to-noise ratio, and both intensity and spatial dynamic ranges comparable to those achieved by Herschel images of the cold ISM in total intensity (Stokes I). The B-BOP 200 mu m images will also have a factor similar to 30 higher resolution than Planck polarisation data. This will make B-BOP a unique tool for characterising the statistical properties of the magnetised ISM and probing the role of magnetic fields in the formation and evolution of the interstellar web of dusty molecular filaments giving birth to most stars in our Galaxy. B-BOP will also be a powerful instrument for studying the magnetism of nearby galaxies and testing Galactic dynamo models, constraining the physics of dust grain alignment, informing the problem of the interaction of cosmic rays with molecular clouds, tracing magnetic fields in the inner layers of protoplanetary disks, and monitoring accretion bursts in embedded protostars.
|
|
| 3. |
|
|
| 4. |
- Basu, S., et al.
(författare)
-
Activity of Ferric Oxide in Steelmaking Slag
- 2010
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 41:2, s. 414-419
-
Tidskriftsartikel (refereegranskat)abstract
- Refining reactions in steelmaking primarily involve oxidation of impurity element(s). The oxidation potential of the slag and the activity of oxygen in the metal (h(O)) are the major factors controlling these chemical reactions. In turn, the oxidation potential of the slag is influenced strongly by the equilibrium distribution of oxygen between ferrous and ferric oxides. We recently investigated the activity coefficient of FeO in steelmaking slag and the effect of chemical composition thereon. This work is focused on estimation of the activity coefficient of Fe2O3.
|
|
| 5. |
- Basu, S., et al.
(författare)
-
Activity of iron oxide in steelmaking slag
- 2008
-
Ingår i: Metallurgical and materials transactions. B, process metallurgy and materials processing science. - : Springer Science and Business Media LLC. - 1073-5615 .- 1543-1916. ; 39:3, s. 447-456
-
Tidskriftsartikel (refereegranskat)abstract
- Most refining reactions in steelmaking involve oxidation of impurity element(s). The product(s) of oxidation either dissolve in the slag or escape as gaseous phase. The activities of oxygen in the metal (h (O)), and that of "FeO" in slag (a (FeO)), are major factors controlling these chemical reactions. The activities of oxygen and "FeO" are thermodynamically related, provided equilibrium distribution of oxygen between the slag and the metal is attained. This enables direct estimation of one parameter from the other. A thorough knowledge of the variation in activity of FeO, and factors affecting the same, is therefore of great importance in the process metallurgy of steelmaking. The present work experimentally measures the activity of FeO in steelmaking slags and attempts to develop a correlation for estimation of gamma(FeO) as a function of temperature and chemical composition of the slag.
|
|
| 6. |
|
|
| 7. |
- Basu, S., et al.
(författare)
-
Thermodynamics of Phosphorus and Sulphur Removal during Basic Oxygen Steelmaking
- 2010
-
Ingår i: STEEL RESEARCH INTERNATIONAL. - : Wiley. ; , s. 932-939
-
Konferensbidrag (refereegranskat)abstract
- Removal of impurity elements from hot metal is essential in basic oxygen steelmaking. Oxidation of phosphorus from hot metal has been studied by several authors since the early days of steelmaking. Influence of different parameters on the distribution of phosphorus, seen during the recent work of the authors, differs somewhat from that reported earlier. On the other hand, removal of sulphur during steelmaking has drawn much less attention. This may be due to the magnitude of desulphurisation in oxygen steelmaking being relatively low and desulphurisation during hot metal pre-treatment or in the ladle furnace offering better commercial viability Further, it is normally accepted that sulphur is removed to steelmaking slag in the form of sulphide only However, recent investigations have indicated that a significant amount of sulphur removed during basic oxygen steelmaking can exist in the form of sulphate in the slag under oxidising conditions. The distribution of sulphur during steelmaking becomes more important in the event of carry-over of sulphur-rich blast-furnace slag, which increases sulphur load in the BOF. The chemical nature of sulphur in this slag undergoes a gradual transition from sulphide to sulphate as the oxidative refining progresses.
|
|
| 8. |
- Fatima, S., et al.
(författare)
-
Investigating Impact of Augmented Reality on Game Design to Facilitate Learning Experiences in Logistics Operations Using Immersive AR Interfaces
- 2021
-
Ingår i: Lecture Notes in Computer Science. - Cham : Springer Science and Business Media Deutschland GmbH. ; , s. 419-426
-
Konferensbidrag (refereegranskat)abstract
- Augmented Reality (AR) provides an immersive experience platform where players may interact with the real world. Virtual digital information details enhance this interaction with the physical environment. This paper focuses on investigating using Augmented Reality (AR) technology for player’s interaction influences the game design (technical features and interactivity aspects mainly) that could facilitate its players to achieve its proposed Intended Learning Objectives when playing different scenarios for logistic operations. To achieve this, an initial mock-up is set up with simple AR interactions to analyse the overall immersive player’s experience.
|
|
