| 1. |
- Volpe, Giovanni, 1979, et al.
(författare)
-
Roadmap for optical tweezers
- 2023
-
Ingår i: Journal of Physics-Photonics. - : IOP Publishing. - 2515-7647. ; 5:2
-
Tidskriftsartikel (refereegranskat)abstract
- Optical tweezers are tools made of light that enable contactless pushing, trapping, and manipulation of objects, ranging from atoms to space light sails. Since the pioneering work by Arthur Ashkin in the 1970s, optical tweezers have evolved into sophisticated instruments and have been employed in a broad range of applications in the life sciences, physics, and engineering. These include accurate force and torque measurement at the femtonewton level, microrheology of complex fluids, single micro- and nano-particle spectroscopy, single-cell analysis, and statistical-physics experiments. This roadmap provides insights into current investigations involving optical forces and optical tweezers from their theoretical foundations to designs and setups. It also offers perspectives for applications to a wide range of research fields, from biophysics to space exploration.
|
|
| 2. |
- Gobel, K., et al.
(författare)
-
Measurement of the Mo-92,Mo-93,Mo-94,Mo-100(gamma,n) reactions by Coulomb Dissociation
- 2016
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 665:1, s. art. no. 012034-
-
Konferensbidrag (refereegranskat)abstract
- The Coulomb Dissociation (CD) cross sections of the stable isotopes Mo-92,Mo-94,Mo-100 and of the unstable isotope Mo-93 were measured at the LAND/(RB)-B-3 setup at GSI Helmholtzzentrum fur Schwerionenforschung in Darmstadt, Germany. Experimental data on these isotopes may help to explain the problem of the underproduction of Mo-92,Mo-94 and Ru-96,Ru-98 in the models of p-process nucleosynthesis. The CD cross sections obtained for the stable Mo isotopes are in good agreement with experiments performed with real photons, thus validating the method of Coulomb Dissociation. The result for the reaction Mo-93(gamma,n) is especially important since the corresponding cross section has not been measured before. A preliminary integral Coulomb Dissociation cross section of the Mo-94(gamma,n) reaction is presented. Further analysis will complete the experimental database for the (gamma,n) production chain of the p-isotopes of molybdenum.
|
|
| 3. |
|
|
| 4. |
- Berg, Frenk van den, et al.
(författare)
-
Results of the European collaborative project "Product Uniformity Control" to improve the inline sensing of mechanical properties and microstructure of automotive steels
- 2018
-
Ingår i: e-Journal of Nondestructive Testing (eJNDT). - 1435-4934. ; 23:8
-
Tidskriftsartikel (refereegranskat)abstract
- A European consortium consisting of four major steel manufacturers and ten academic technology institutes has conducted a research and development project, called “Product Uniformity Control“ (PUC) in the period 2013 to 2017. This project aimed to develop and improve non-destructive (inline) measurement techniques to characterise the (uniformity of the) microstructure of steel strip products. In this project, a multitude of strip steel samples from various stages of production have been collected from the four participating steel manufacturers. The samples have been characterised in various ways, namely on their (1) non-destructive measurement parameters using different techniques suited for inline evaluation, (2) fundamental ultrasonic and electromagnetic properties (wave speed, ultrasonic attenuation, magnetisation loops, coercive field), (3) tensile properties (stress-strain curves) and (4) microstructure (by optical micrographs and EBSD images). The correlations between these different characterisations will be addressed. Besides the experimental characterisation, a strong accent has been on modelling activities: during the project, fundamental models have been developed to describe, starting from 2D and 3D microstructures, the ultrasonic and magnetic properties, which are next used as input to sensor models that predict the output of the inline measurement systems. This contribution presents the recent results of experimental work, which underlines the importance of associated modelling studies for the interpretation of the measurement data for the benefit of inline characterisation of the mechanical properties complementary to traditional destructive tensile testing.
|
|
| 5. |
- Klimkiewicz, A., et al.
(författare)
-
Pygmy Dipole Strength in Exotic Nuclei and the Equation of State
- 2009
-
Ingår i: AIP Conference Proceedings. - 1551-7616 .- 0094-243X. ; 1165, s. 181-184 461
-
Konferensbidrag (refereegranskat)abstract
- A concentration of dipole strength at energies below the giant dipole resonance was observed in neutron-rich nuclei around Sn-132 in an experiment using the FRS-LAND setup. This so-called "pygmy" dipole strength can be related to the parameters of the symmetry energy and to the neutron skin thickness on the grounds of a relativistic quasiparticle random-phase approximation. Using this ansatz and the experimental findings for Sn-130 and 132 Sri, we derive a value of the symmetry energy pressure of (p) over bar (0) = 2.2 +/- 0.5 MeV/fm(3). Neutron skin thicknesses of R-n-R-p = 0.23 +/- 0.03 fm and 0.24 +/- 0.03 fm for Sn-130 and Sn-132, respectively, have been determined. Preliminary results on Ni-68 from a similar experiment using an improved setup indicate an enhanced cross section at low energies, while the results for Ni-58 are in accordance with results from photoabsorption measurements.
|
|
| 6. |
- Mahata, K., et al.
(författare)
-
Study of dipole excitations and the single particle structure of neutron rich Ni isotopes
- 2008
-
Ingår i: AIP Conference Proceedings. - 1551-7616 .- 0094-243X. ; 1012, s. 389-391 453
-
Konferensbidrag (refereegranskat)abstract
- An experiment was performed using the FRS-LAND setup at GSI to study the dipole strength distributions above neutron separation threshold for neutron-rich Ni isotopes. Measurements, using the same experimental setup, were also carried out to extract single particle occupancies via knockout reactions to investigate the structure and magicity of the neutron-rich Ni isotopes. The status of the data analysis and preliminary results are presented.
|
|
| 7. |
- Van Den Berg, F. D., et al.
(författare)
-
Product uniformity control - A research collaboration of european steel industries to non-destructive evaluation of microstructure and mechanical properties
- 2018
-
Ingår i: Stud. Appl. Electromagn. Mech.. - : IOS Press. - 9781614998358 ; 43, s. 120-129
-
Konferensbidrag (refereegranskat)abstract
- In steel manufacturing, the conventional method to determine the mechanical properties and microstructure is by offline, destructive (lab-)characterisation of sample material that is typically taken from the head or the tail of the coil. Since coils can be up to 7 km long, the samples are not always representative for the main coil body. Also, the time delay (typically a few days) between the actual production and the availability of the characterisation results implies that these results cannot be exploited for real-time adaptation of the process settings. Information about the microstructure and material properties can also be obtained from electromagnetic (EM) and ultrasonic (US) parameters, which can be measured in real-time, non-destructively, and over the full length of the steel strip product. With the aim to improve the consistency in product quality by use of inline EM and US measurements, a European project called "Product Uniformity Control" (PUC) has been set up as a broad collaboration between 4 major European Steel Manufacturers and 10 Universities / Research institutes. Using both numerical simulations and experimental characterisations, we study the inline measured EM and US parameters in regard of the microstructural and mechanical properties. In this way, we aim to establish an improved understanding of their mutual relationships, and to apply this knowledge in existing and new nondestructive evaluation techniques. In this paper, the concerted approach of modelling and experimental validation will be addressed, and results of this work will be shown in combination with inline measured data.
|
|
| 8. |
|
|
| 9. |
- Soust-Verdaguer, B., et al.
(författare)
-
Implications of using systematic decomposition structures to organize building LCA information: A comparative analysis of national standards and guidelines- IEA EBC ANNEX 72
- 2020
-
Ingår i: IOP Conference Series: Earth and Environmental Science. - : IOP Publishing. - 1755-1307 .- 1755-1315. ; 588:2
-
Konferensbidrag (refereegranskat)abstract
- Introduction: The application of the Life Cycle Assessment (LCA) technique to a building requires the collection and organization of a large amount of data over its life cycle. The systematic decomposition method can be used to classify building components, elements and materials, overcome specific difficulties that are encountered when attempting to complete the life cycle inventory and increase the reliability and transparency of results. In this paper, which was developed in the context of the research project IEA EBC Annex 72, we demonstrate the implications of taking such approach and describe the results of a comparison among different national standards/guidelines that are used to conduct LCA for building decomposition. Methods: We initially identified the main characteristics of the standards/guidelines used by Annex participant countries. The “be2226” reference office building was used as a reference to apply the different national standards/guidelines related to building decomposition. It served as a basis of comparison, allowing us to identify the implications of using different systems/standards in the LCA practice, in terms of how these differences affect the LCI structures, LCA databases and the methods used to communicate results. We also analyzed the implications of integrating these standards/guidelines into Building Information Modelling (BIM) to support LCA. Results: Twelve national classification systems/ standards/guidelines for the building decomposition were compared. Differences were identified among the levels of decomposition and grouping principles, as well as the consequences of these differences that were related to the LCI organization. In addition, differences were observed among the LCA databases and the structures of the results. Conclusions: The findings of this study summarize and provide an overview of the most relevant aspects of using a standardized building decomposition structure to conduct LCA. Recommendations are formulated on the basis of these findings.
|
|
| 10. |
- Steffen, A., et al.
(författare)
-
A synthesis of atmospheric mercury depletion event chemistry in the atmosphere and snow
- 2008
-
Ingår i: Atmospheric Chemistry and Physics. - : Copernicus GmbH. - 1680-7316 .- 1680-7324. ; 8:6, s. 1445-1482
-
Tidskriftsartikel (refereegranskat)abstract
- It was discovered in 1995 that, during the spring time, unexpectedly low concentrations of gaseous elemental mercury (GEM) occurred in the Arctic air. This was surprising for a pollutant known to have a long residence time in the atmosphere; however conditions appeared to exist in the Arctic that promoted this depletion of mercury (Hg). This phenomenon is termed atmospheric mercury depletion events (AMDEs) and its discovery has revolutionized our understanding of the cycling of Hg in Polar Regions while stimulating a significant amount of research to understand its impact to this fragile ecosystem. Shortly after the discovery was made in Canada, AMDEs were confirmed to occur throughout the Arctic, sub-Artic and Antarctic coasts. It is now known that, through a series of photochemically initiated reactions involving halogens, GEM is converted to a more reactive species and is subsequently associated to particles in the air and/or deposited to the polar environment. AMDEs are a means by which Hg is transferred from the atmosphere to the environment that was previously unknown. In this article we review Hg research taken place in Polar Regions pertaining to AMDEs, the methods used to collect Hg in different environmental media, research results of the current understanding of AMDEs from field, laboratory and modeling work, how Hg cycles around the environment after AMDEs, gaps in our current knowledge and the future impacts that AMDEs may have on polar environments. The research presented has shown that while considerable improvements in methodology to measure Hg have been made but the main limitation remains knowing the speciation of Hg in the various media. The processes that drive AMDEs and how they occur are discussed. As well, the role that the snow pack and the sea ice play in the cycling of Hg is presented. It has been found that deposition of Hg from AMDEs occurs at marine coasts and not far inland and that a fraction of the deposited Hg does not remain in the same form in the snow. Kinetic studies undertaken have demonstrated that bromine is the major oxidant depleting Hg in the atmosphere. Modeling results demonstrate that there is a significant deposition of Hg to Polar Regions as a result of AMDEs. Models have also shown that Hg is readily transported to the Arctic from source regions, at times during springtime when this environment is actively transforming Hg from the atmosphere to the snow and ice surfaces. The presence of significant amounts of methyl Hg in snow in the Arctic surrounding AMDEs is important because this species is the link between the environment and impacts to wildlife and humans. Further, much work on methylation and demethylation processes has occurred but these processes are not yet fully understood. Recent changes in the climate and sea ice cover in Polar Regions are likely to have strong effects on the cycling of Hg in this environment; however more research is needed to understand Hg processes in order to formulate meaningful predictions of these changes.
|
|
