| 1. |
- Heurlin, Magnus, et al.
(författare)
-
Structural Properties of Wurtzite InP-InGaAs Nanowire Core-Shell Heterostructures
- 2015
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 15:4, s. 2462-2467
-
Tidskriftsartikel (refereegranskat)abstract
- We report on growth and characterization of wurtzite InP-In1-xGaxAs core-shell nanowire heterostructures. A range of nanowire structures with different Ga concentration in the shell was characterized with transmission electron microscopy and X-ray diffraction. We found that the main part of the nanowires has a pure wurtzite crystal structure, with occasional stacking faults occurring only at the top and bottom. This allowed us to determine the structural properties of wurtzite In1-xGaxAs. The InP-In1-xGaxAs core-shell nanowires show a triangular and hexagonal facet structure of {1100} and {10 (10) over bar} planes. X-ray diffraction measurements showed that the core and the shell are pseudomorphic along the c-axis, and the strained axial lattice constant is closer to the relaxed In1-xGaxAs shell. Microphotoluminescence measurements of the nanowires show emission in the infrared regime, which makes them suitable for applications in optical communication.
|
|
| 2. |
- Heurlin, Magnus, et al.
(författare)
-
Synthesis of Doped InP Core-Shell Nanowires Evaluated Using Hall Effect Measurements.
- 2014
-
Ingår i: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 14:2, s. 749-753
-
Tidskriftsartikel (refereegranskat)abstract
- InP core-shell nanowire pn-junctions doped with Zn and Sn have been investigated in terms of growth morphology and shell carrier concentration. The carrier concentrations were evaluated using spatially resolved Hall effect measurements and show improved homogeneity compared to previous investigations, attributed to the use of Sn as the n-type dopant. Anisotropies in the growth rate of different facets are found for different doping levels that in turn affects the migration of Sn and In on the nanowire surface. A route for increasing the In migration length to obtain a more homogeneous shell thickness is presented.
|
|
| 3. |
- Jain, Vishal, 1989-, et al.
(författare)
-
Large Area Photodetectors at 1.3/1.55 μm Based on InP/InAsP NWs
- 2014
-
Konferensbidrag (refereegranskat)abstract
- Optical communication systems benefit a lot from APDs due to their increased photocurrent gain as compared to conventional photodetectors. An avalanche region in a high bandgap material is especially useful to avoid the tunneling leakage currents in smaller bandgap materials needed for absorption at 1.3/1.55 µm wavelengths. Self-assembled III-V semiconductor nanowires have a key advantage owing to the enhanced absorption due to optical resonance effects and the strain relaxation in NWs, thus facilitating monolithic integration of different heterostructures on cheaper substrates. Here, we present electrical and optical results from large ensembles of InP/InAsP NWs, axially grown on p+ InP substrates. The NW base consists of an InP p-n junction acting as the avalanche region followed by an InP/InAsP absorption region, and ending with a top InP n+-segment. The 130nm diameter NW arrays are contacted in a vertical geometry using SiO2 as the insulating layer and ITO as the top contact. The n-doping in the avalanche region is varied to study it’s influence on the avalanche mechanism. Also the bandgap in the absorption region is varied from pure InP to smaller bandgap InAsP by varying the As content. Clear interband signals from different crystal phases of InP/InAsP are observed in photocurrent spectroscopy. Moreover, the photocurrent spectra are consistent with spatially resolved photoluminescence signals. We also report on polarization and angle dependent photocurrent response of the NW array.
|
|
| 4. |
- Jain, Vishal, 1989-, et al.
(författare)
-
Large area photodetectors based on InP NWs with InAs/InAsP QWs
- 2014
-
Konferensbidrag (refereegranskat)abstract
- Focal plane arrays have a widespread use in infrared imaging, which often rely on cryogenic cooling to curtail the dark current level necessary for a reasonable signal-to-noise ratio. Quantum well (QW) infrared photodetectors are uniform over large areas, but suffer from a severe drawback related to the selection rules for intersubband absorption. An interesting alternative is self-assembled III-V nanowires offering a key advantage owing to the enhanced absorption by optical resonance effects and strain relaxation.We present electrical and optical results from large ensembles of n+-i-n+ InP NWs, axially grown on InP substrates with InAs/InAsP QWs embedded within the i-segment, designed for both interband and intersubband detection. The NWs are contacted in a vertical geometry using 50 nm SiO2 as the insulating layer and ITO as the top contact. We first investigate the crystal quality of the InAsP QWs grown in 180 nm diameter NWs, using PL, CL and TEM. To achieve more abrupt InAs/InAsP QWs, we grow 130 nm diameter NWs and deplete the In present in the Au catalysts. The effect of n-doping on the device performance is studied by fabricating two different NW geometries, with and without an n+-segment grown before the nominal i-segment in the NW. In addition, the position of the QWs within the i-segment is varied to further scrutinize effects related to doping and crystal structure. Finally, we report spectrally resolved photocurrent results from the QWs in the near-infrared region and discuss about the further developments needed for intersubband detection.
|
|
| 5. |
- Karimi, Mohammad, 1988-, et al.
(författare)
-
Room-temperature InP/InAsP Quantum Discs-in-Nanowire Infrared Photodetectors
- 2017
-
Ingår i: Nano letters (Print). - Washington, DC : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:6, s. 3356-3362
-
Tidskriftsartikel (refereegranskat)abstract
- The possibility to engineer nanowire heterostructures with large bandgap variations is particularly interesting for technologically important broadband photodetector applications. Here we report on a combined study of design, fabrication, and optoelectronic properties of infrared photodetectors comprising four million n+–i–n+ InP nanowires periodically ordered in arrays. The nanowires were grown by metal–organic vapor phase epitaxy on InP substrates, with either a single or 20 InAsP quantum discs embedded in the i-segment. By Zn compensation of the residual n-dopants in the i-segment, the room-temperature dark current is strongly suppressed to a level of pA/NW at 1 V bias. The low dark current is manifested in the spectrally resolved photocurrent measurements, which reveal strong photocurrent contributions from the InAsP quantum discs at room temperature with a threshold wavelength of about 2.0 μm and a bias-tunable responsivity reaching 7 A/W@1.38 μm at 2 V bias. Two different processing schemes were implemented to study the effects of radial self-gating in the nanowires induced by the nanowire/SiOx/ITO wrap-gate geometry. Summarized, our results show that properly designed axial InP/InAsP nanowire heterostructures are promising candidates for broadband photodetectors. © 2017 American Chemical Society.
|
|
| 6. |
- Kawaguchi, Kenichi, et al.
(författare)
-
InAs quantum dots and quantum wells grown on stacking-fault controlled InP nanowires with wurtzite crystal structure
- 2011
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 99:13
-
Tidskriftsartikel (refereegranskat)abstract
- Heteroepitaxial growth of InAs was investigated on sidewalls of InP nanowires (NWs) using metal-organic vapor phase epitaxy. InAs quantum wells (QWs) with smooth surface were formed on the InP NWs having perfect wurtzite phase structure. On the other hand, InAs quantum dots (QDs) were formed on wurtzite InP NWs purposely introduced with stacking-fault segments. Photoluminescence from single NWs attributed to both QWs and QDs was observed. (C) 2011 American Institute of Physics. [doi:10.1063/1.3646386]
|
|
| 7. |
- Lindelöw, Fredrik, et al.
(författare)
-
Doping evaluation of InP nanowires for tandem junction solar cells
- 2016
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 27:6
-
Tidskriftsartikel (refereegranskat)abstract
- In order to push the development of nanowire-based solar cells further using optimized nanowire diameter and pitch, a doping evaluation of the nanowire geometry is necessary. We report on a doping evaluation of n-type InP nanowires with diameters optimized for light absorption, grown by the use of metal-organic vapor phase epitaxy in particle-assisted growth mode using tetraethyltin (TESn) as the dopant precursor. The charge carrier concentration was evaluated using four-probe resistivity measurements and spatially resolved Hall measurements. In order to reach the highest possible nanowire doping level, we set the TESn molar fraction at a high constant value throughout growth and varied the trimethylindium (TMIn) molar fraction for different runs. Analysis shows that the charge carrier concentration in nanowires grown with the highest TMIn molar fraction (not leading to kinking nanowires) results in a low carrier concentration of approximately 10(16) cm(-3). By decreasing the molar fraction of TMIn, effectively increasing the IV/III ratio, the carrier concentration increases up to a level of about 10(19) cm(-3), where it seems to saturate. Axial carrier concentration gradients along the nanowires are found, which can be correlated to a combination of changes in the nanowire growth rate, measured in situ by optical reflectometry, and polytypism of the nanowires observed in transmission electron microscopy.
|
|
| 8. |
- Lindgren, David, et al.
(författare)
-
A luminescence study of doping effects in InP-based radial nanowire structures
- 2013
-
Ingår i: Journal of Physics, Conference Series. - : Institute of Physics Publishing (IOPP). - 1742-6588 .- 1742-6596. ; 471:1
-
Tidskriftsartikel (refereegranskat)abstract
- We have used micro-photo- and cathodo-luminescence at low temperatures to study the effects of sulphur doping in InP and radial InP/InAs/InP structured nanowires. Samples with pure wurtzite crystal structure, with modulated wurtzite/zincblende crystal structure and with different radial InAs growth times were investigated. We observed a doping concentration gradient along the nanowires, the location of segments of different crystal structure and thickness fluctuations on the monolayer scale of the InAs layer.
|
|
| 9. |
|
|
| 10. |
- Lindgren, David, et al.
(författare)
-
Optical characterization of InAs quantum wells and dots grown radially on wurtzite InP nanowires.
- 2013
-
Ingår i: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 24:22
-
Tidskriftsartikel (refereegranskat)abstract
- Correlated micro-photoluminescence (μPL) and cathodoluminescence (CL) measurements are reported for single core-shell InP-InAs wurtzite nanowires grown using metal-organic vapor phase epitaxy. Samples covering a radial InAs shell thickness of 1-12 ML were investigated. The effective masses for the wurtzite material were determined from the transition energy dependence of the InAs shell thickness, using a model based on linear deformation potential theory. InP cores with segments of mixed zincblende and wurtzite, on which quantum dots nucleated selectively, were also investigated. Narrow peaks were observed by μPL and the spatial origin of the emission was identified with CL imaging.
|
|
