| 1. |
- He, Hanbing, et al.
(författare)
-
Mechanism of Quartz Bed Particle Layer Formation in Fluidized Bed Combustion of Wood-Derived Fuels
- 2016
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 30:3, s. 2227-2232
-
Tidskriftsartikel (refereegranskat)abstract
- Agglomeration is among one of the major problems in the operation of fluidized bed boilers. The formation of bed particle layers is thought to play an important role on the occurrence of agglomeration in wood-fired fluidized (quartz) beds. In spite of frequent experimental reports on the quartz bed particle layer characteristics, the underlying bed layer formation process has not yet been presented. By combining our previously experimental results on layer characteristics for samples with durations from 4 h to 23 days, with phase diagrams, thermochemical equilibrium calculations, and a diffusion model, a mechanism of quartz bed particle layer formation was proposed. For younger bed particles (
|
|
| 2. |
- He, Hanbing, et al.
(författare)
-
Time dependence of bed particle layer formation in fluidized quartz bed combustion of wood-derived fuels
- 2014
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 28:6, s. 3841-3848
-
Tidskriftsartikel (refereegranskat)abstract
- Formation of sticky layers on bed particles has been considered as a prerequisite for bed agglomeration in fluidized bed combustion of wood-derived fuels. The present investigation was undertaken to determine the quartz bed particle layer formation process in fluidized bed combustion of wood-derived fuels. Bed material samples from three different appliances, bench-scale bubbling fluidized bed, full-scale bubbling fluidized bed, and full-scale circulating fluidized bed, at different sampling times from startup with a fresh bed were collected. Scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) and X-ray diffraction (XRD) were used to explore layer morphology and chemical composition and to gain information on crystalline phases of the layers and coatings. Significant differences in layer morphology and composition were found for quartz bed particles with different ages. For bed samples with operational duration of less than 1 day, only one thin Ca-, Si-, O-, and K-rich homogeneous quartz bed particle layer that has a relatively high K/Ca molar ratio was found. For quartz bed particles with an age from around 1 day to 2 weeks, an outer more particle-rich coating layer was also found. During the initial days of this period, the layer growth rate was high but decreased over time, and decreasing K/Ca and increasing Ca/Si molar ratios in the inner bed particle layer were observed. For bed particles with age between 2 and 3 weeks, a much lower layer growth rate was observed. At the same time, the Ca/Si molar ratio reached high values and the K concentration remained on a very low level. In addition to these layer formation processes mentioned, also an inner–inner/crack layer was also formed in the circulating fluidized bed quartz bed particles simultaneously with the inner bed particle layer.
|
|
| 3. |
- Kuba, Matthias, et al.
(författare)
-
Deposit build-up and ash behavior in dual fluid bed steam gasification of logging residues in an industrial power plant
- 2015
-
Ingår i: Fuel processing technology. - : Elsevier BV. - 0378-3820 .- 1873-7188. ; 139, s. 33-41
-
Tidskriftsartikel (refereegranskat)abstract
- A promising way to substitute fossil fuels for production of electricity, heat, fuels for transportation and synthetic chemicals is biomass steam gasification in a dual fluidized bed (DFB). Using lower-cost feedstock, such as logging residues, instead of stemwood, improves the economic operation. In Senden, near Ulm in Germany, the first plant using logging residues is successfully operated by Stadtwerke Ulm. The major difficulties are slagging and deposit build-up. This paper characterizes inorganic components of ash forming matter and draws conclusions regarding mechanisms of deposit build-up. Olivine is used as bed material. Impurities, e.g., quartz, brought into the fluidized bed with the feedstock play a critical role. Interaction with biomass ash leads to formation of potassium silicates, decreasing the melting temperature. Recirculation of coarse ash back into combustion leads to enrichment of critical fragments. Improving the management of inorganic streams and controlling temperature levels is essential for operation with logging residues. (C) 2015 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Kuba, Matthias, et al.
(författare)
-
Mechanism of Layer Formation on Olivine Bed Particles in Industrial-Scale Dual Fluid Bed Gasification of Wood
- 2016
-
Ingår i: Energy & Fuels. - : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 30:9, s. 7410-7418
-
Tidskriftsartikel (refereegranskat)abstract
- Utilization of biomass as feedstock in dual fluidized bed steam gasification is a promising technology for the substitution of fossil energy carriers. Experience from industrial-scale power plants showed an alteration of the olivine bed material due to interaction with biomass ash components. This change results mainly in the formation of Ca-rich layers on the bed particles. In this paper, a mechanism for layer formation is proposed and compared to the better understood mechanism for layer formation on quartz bed particles. Olivine bed material was sampled at an industrial-scale power plant before the start of operation and at predefined times after the operation had commenced. Therefore, time-dependent layer formation under industrial-scale conditions could be investigated. The proposed mechanism suggests that the interaction between wood biomass ash and olivine bed particles is based on a solid-solid substitution reaction, where Ca2+ is incorporated into the crystal structure. As a consequence, Fe2+/3+ and Mg2+ ions are expelled as oxides. This substitution results in the formation of cracks in the particle layer due to a volume expansion in the crystal structure once Ca2+ is incorporated. The results of this work are compared to relevant published results, including those related to quartz bed particles
|
|
| 5. |
- Kuba, Matthias, et al.
(författare)
-
Thermal stability of bed particle layers on naturally occurring minerals from dual fluid bed gasification of woody biomass
- 2016
-
Ingår i: Energy & Fuels. - Washington : American Chemical Society (ACS). - 0887-0624 .- 1520-5029. ; 30:10, s. 8277-8285
-
Tidskriftsartikel (refereegranskat)abstract
- The use of biomass as feedstock for gasification is a promising way of producing not only electricity and heat but also fuels for transportation and synthetic chemicals. Dual fluid bed steam gasification has proven to be suitable for this purpose. Olivine is currently the most commonly used bed material in this process due to its good agglomeration performance and its catalytic effectiveness in the reduction of biomass tars. However, as olivine contains heavy metals such as nickel and chromium, no further usage of the nutrient-rich ash is possible, and additional operational costs arise due to necessary disposal of the ash fractions. This paper investigates possible alternative bed materials and their suitability for dual fluid bed gasification systems focusing on the behavior of the naturally occurring minerals olivine, quartz, and K-feldspar in terms of agglomeration and fracturing at typical temperatures. To this end, samples of bed materials with layer formation on their particles were collected at the industrial biomass combined heat and power (CHP) plant in Senden, Germany, which uses olivine as the bed material and woody biomass as feedstock. The low cost logging residue feedstock contains mineral impurities such as quartz and K-feldspar, which become mixed into the fluidized bed during operation. Using experimental and thermochemical analysis, it was found that the layers on olivine and K-feldspar showed a significantly lower agglomeration tendency than quartz. Significant fracturing of particles or their layers could be detected for olivine and quartz, whereas K-feldspar layers were characterized by a higher stability. High catalytic activity is predicted for all three minerals once Ca-rich particle layers are fully developed. However, quartz may be less active during the buildup of the layers due to lower amounts of Ca in the initial layer formation.
|
|
