| 1. |
- Kattge, Jens, et al.
(författare)
-
TRY plant trait database - enhanced coverage and open access
- 2020
-
Ingår i: Global Change Biology. - : Wiley-Blackwell. - 1354-1013 .- 1365-2486. ; 26:1, s. 119-188
-
Tidskriftsartikel (refereegranskat)abstract
- Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.
|
|
| 2. |
- Hsu, N. -Y, et al.
(författare)
-
Predicted risk of childhood allergy, asthma, and reported symptoms using measured phthalate exposure in dust and urine
- 2012
-
Ingår i: Indoor Air. - : Hindawi Limited. - 0905-6947 .- 1600-0668. ; 22:3, s. 186-199
-
Tidskriftsartikel (refereegranskat)abstract
- The associated risk of phthalate exposure, both parent compounds in the home and their metabolites in urine, to childhood allergic and respiratory morbidity, after adjusting for exposures of indoor pollutants, especially bioaerosols, was comprehensively assessed. Levels of five phthalates in settled dust from the homes of 101 children (39 years old) were measured, along with their corresponding urinary metabolites. Other environmental risk factors, including indoor CO2, PM2.5, formaldehyde, 1,3-beta-d-glucan, endotoxin, allergen and fungal levels, were concomitantly examined. Subjects health status was verified by pediatricians, and parents recorded observed daily symptoms of their children for the week that the home investigation visit took place. Significantly increased level of benzylbutyl phthalate, in settled dust, was associated with test case subjects (allergic or asthmatic children). Higher levels of dibutyl phthalate and its metabolites, mono-n-butyl phthalate, and mono-2-ethylhexyl phthalate were found to be the potential risk factors for the health outcomes of interest. Similarly, indoor fungal exposure remained a significant risk factor, especially for reported respiratory symptoms. The relative contribution from exposure to phthalates and indoor biocontaminants in childhood allergic and respiratory morbidity is, for the first time, quantitatively assessed and characterized. Practical Implications For asthmatic and allergic children living in subtropical and highly developed environments like homes in Taiwan, controlling environmental exposure of phthalates may be viewed as equally important as avoiding indoor microbial burdens, for the management of allergy-related diseases. It is also recognized that multidisciplinary efforts will be critical in realizing the true underlying mechanisms associated with these observations.
|
|
| 3. |
- Baber, Ashleigh E., et al.
(författare)
-
Stabilization of Catalytically Active Cu plus Surface Sites on TitaniumCopper Mixed-Oxide Films**
- 2014
-
Ingår i: Angewandte Chemie International Edition. - : Gesellschaft Deutscher Chemiker. - 1433-7851 .- 1521-3773. ; 53:21, s. 5336-5340
-
Tidskriftsartikel (refereegranskat)abstract
- The oxidation of CO is the archetypal heterogeneous catalytic reaction and plays a central role in the advancement of fundamental studies, the control of automobile emissions, and industrial oxidation reactions. Copper-based catalysts were the first catalysts that were reported to enable the oxidation of CO at room temperature, but a lack of stability at the elevated reaction temperatures that are used in automobile catalytic converters, in particular the loss of the most reactive Cu+ cations, leads to their deactivation. Using a combined experimental and theoretical approach, it is shown how the incorporation of titanium cations in a Cu2O film leads to the formation of a stable mixed-metal oxide with a Cu+ terminated surface that is highly active for CO oxidation.
|
|
| 4. |
- Chen, Qiaonan, 1992, et al.
(författare)
-
Effects of Flexible Conjugation-Break Spacers of Non-Conjugated Polymer Acceptors on Photovoltaic and Mechanical Properties of All-Polymer Solar Cells
- 2022
-
Ingår i: Nano-Micro Letters. - : Springer Science and Business Media LLC. - 2311-6706 .- 2150-5551. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- Highlights: A series of non-conjugated acceptor polymers with flexible conjugation-break spacers (FCBSs) of different lengths were synthesized.The effect of FCBSs length on solubility of the acceptor polymers, and their photovoltaic and mechanical properties in all-polymer solar cells were explored.This work provides useful guidelines for the design of semiconducting polymers by introducing FCBS with proper length, which can giantly improved properties that are not possible to be achieved by the state-of-the-art fully conjugated polymers. Abstract: All-polymer solar cells (all-PSCs) possess attractive merits including superior thermal stability and mechanical flexibility for large-area roll-to-roll processing. Introducing flexible conjugation-break spacers (FCBSs) into backbones of polymer donor (PD) or polymer acceptor (PA) has been demonstrated as an efficient approach to enhance both the photovoltaic (PV) and mechanical properties of the all-PSCs. However, length dependency of FCBS on certain all-PSC related properties has not been systematically explored. In this regard, we report a series of new non-conjugated PAs by incorporating FCBS with various lengths (2, 4, and 8 carbon atoms in thioalkyl segments). Unlike common studies on so-called side-chain engineering, where longer side chains would lead to better solubility of those resulting polymers, in this work, we observe that the solubilities and the resulting photovoltaic/mechanical properties are optimized by a proper FCBS length (i.e., C2) in PA named PYTS-C2. Its all-PSC achieves a high efficiency of 11.37%, and excellent mechanical robustness with a crack onset strain of 12.39%, significantly superior to those of the other PAs. These results firstly demonstrate the effects of FCBS lengths on the PV performance and mechanical properties of the all-PSCs, providing an effective strategy to fine-tune the structures of PAs for highly efficient and mechanically robust PSCs.[Figure not available: see fulltext.]
|
|
| 5. |
- Filate, Tadele Tamenu, 1994, et al.
(författare)
-
Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene-Quinoxaline Polymers
- 2024
-
Ingår i: ACS Applied Materials & Interfaces. - : American Chemical Society (ACS). - 1944-8252 .- 1944-8244. ; 16:10, s. 12886-12896
-
Tidskriftsartikel (refereegranskat)abstract
- Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T)) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼−5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N′-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC
|
|
| 6. |
- Winestrand, Sandra, et al.
(författare)
-
Oxalate decarboxylase of Trametes versicolor : biochemical characterization and performance in bleaching filtrates from the pulp and paper industry
- 2012
-
Ingår i: Journal of chemical technology and biotechnology (1986). - : Wiley. - 0268-2575 .- 1097-4660. ; 87:11, s. 1600-1606
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Oxalate decarboxylase (ODC) from acid-induced cultures of the white-rot fungus Trametes versicolor was purified and characterized with respect to its biochemical properties and the possibility to utilize the enzyme for treatment of process water with the intention to prevent problems with calcium-oxalate scaling in the pulp and paper industry. RESULTS: Purified T. versicolor ODC was identified by tandem mass spectrometry. As estimated by using SDS-PAGE, the molecular mass was 69 kDa, and 60 kDa after deglycosylation with N-glycosidase F. The pH optimum was 2.5 and the temperature optimum was 4045 degrees C. The effects of ten potential inhibitors in industrial filtrates were examined. The enzyme was sensitive to low concentrations (0.1 mmol L-1) of chlorite and sulfite. T. versicolor ODC exhibited activity in 16 filtrates collected from mechanical pulping and kraft pulping. It had higher activity than ODC from Aspergillus niger in all of the filtrates and higher activity than oxalate oxidase from barley in all filtrates except two. CONCLUSIONS: The investigation shows basic biochemical properties of T. versicolor ODC and indicates that the enzyme may be useful for treatment of industrial filtrates under acidic conditions. Copyright (c) 2012 Society of Chemical Industry
|
|
