| 1. |
- Bentham, James, et al.
(författare)
-
A century of trends in adult human height
- 2016
-
Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
|
|
| 2. |
|
|
| 3. |
- Zhou, Bin, et al.
(författare)
-
Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
- 2016
-
Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
-
Tidskriftsartikel (refereegranskat)abstract
- Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
|
|
| 4. |
- Chandrasekaran, Sundaram, et al.
(författare)
-
Advanced opportunities and insights on the influence of nitrogen incorporation on the physico-/electro-chemical properties of robust electrocatalysts for electrocatalytic energy conversion
- 2021
-
Ingår i: Coordination chemistry reviews. - : Elsevier. - 0010-8545 .- 1873-3840. ; 449
-
Forskningsöversikt (refereegranskat)abstract
- The use of a wide range of methods for incorporating nitrogen atoms on robust catalysts has given rise to fundamental advances in the field of energy conversion and storage. Recently, nitrogen incorporation has proven to be able to fine-tune the electron densities of exposed active sites to create high-performance electrocatalysts. The preservation of a strong interface between the local atomic coordination of nitrogen atoms on bare carbon, single metal atoms, transition metal oxides, metal chalcogenides, and MXenes during synthesis plays an important role in producing an efficient electrocatalysts. In addition, the ability of nitrogen atoms to bind with carbon or metal atoms can be influenced by processing conditions. In this regard, this review is the first comprehensive overview of the range of synthetic strategies to form nitrogen incorporated catalysts and assess their chemical, structural, physical electronic property modification and their influence on electrocatalytic ORR, OER, and HER performance. This review will describe how specific strategies have been utilized to realise effective electrocatalytic systems, including the energy conversion of nitrogen incorporated catalysts, structural coordination, and material optimization. Finally, the main challenges to be considered in future investigations in order to initiate new research efforts in this promising research area are discussed.
|
|
| 5. |
- Chen, Xu, et al.
(författare)
-
Ductility deterioration induced by L21 phase in ferritic alloy through Ti addition
- 2023
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier Editora Ltda. - 2238-7854. ; 25, s. 3273-3284
-
Tidskriftsartikel (refereegranskat)abstract
- Ductility deterioration induced by L21-Ni2AlTi precipitates in the aged ferritic alloys was examined systematically by using a combination of scanning transmission electron microscope (STEM), mechanical tests and first-principles thermodynamic calculations. The experimental studies revealed that the strength and hardness of the aged Fe–10Cr–5Ni–1Al–1Ti ferritic alloy containing B2–NiAl and L21-Ni2AlTi precipitates were higher than that of the aged Fe–10Cr–5Ni–1Al ferritic alloy containing NiAl precipitates, whereas the elongation-to-failure decreased dramatically from 9.3% to 0.3% indicating an obvious ductility deterioration due to the formation of L21-Ni2AlTi precipitates. This was also confirmed by the observation of fracture transition mode from dimpled failure to cleavage failure. The first-principles calculations, concerning the precipitate/matrix interface, were carried out to provide a theoretical analysis for the ductile–brittle transition by means of empirical ductility criteria ratios G/B and (C12–C44)/B as well as cleavage energy. The cleavage energy results indicated an intrinsic brittleness of the L21-Ni2AlTi phase and the L21-Ni2AlTi/BCC-Fe interface. Our analysis revealed that the intrinsic brittleness of L21-Ni2AlTi phase and L21-Ni2AlTi/BCC-Fe interface plays a vital role in determining the deformation behavior of the aged Fe–10Cr–5Ni–1Al–1Ti alloy.
|
|
| 6. |
- He, Guojing, et al.
(författare)
-
Shear Behavior Study on Timber-Concrete Composite Structures with Bolts
- 2016
-
Ingår i: BioResources. - : BioResources. - 1930-2126 .- 1930-2126. ; 11:4, s. 9205-9218
-
Tidskriftsartikel (refereegranskat)abstract
- The key point of design for timber-concrete composite structure is to ensure the reliability of shear connectors. This study examined the mechanical properties of bolt-type connectors in timber-concrete composite structures theoretically and experimentally. The theoretical study was based on the Johansen yield theory (European Yield Model). Push-out specimens with different bolt dimensions were tested to determine the shear capacity and slip modulus. According to the experimental results, bolts yielded without timber or concrete cracks when the stiffness of bolts was not very great. The shear capacity and slip modulus of the bolt connectors were directly proportional to the diameter of the bolt. The strength of concrete was found to significantly affect the shear capacity of bolt connectors. Comparison between the theoretical and the experimental shear strength results showed reasonable agreement.
|
|
| 7. |
- He, Shuang, et al.
(författare)
-
First-principles study of Re-W interactions and their effects on the mechanical properties of γ/γ' interface in Ni-based single-crystal alloys
- 2023
-
Ingår i: Materials Today Communications. - : Elsevier. - 2352-4928. ; 36
-
Tidskriftsartikel (refereegranskat)abstract
- The distribution of solutes and their interactions play a crucial role in determining the mechanical properties of the γ/γ′ interface in Ni-based single-crystal alloys. In this study, atomic interactions between Re and W and their alloying effects on the inter-phase cohesion of the γ/γ′ interface are investigated by first-principles calculations. Our results show that W atom exhibits a preference for partitioning into the γ phase, while the stability of the γ/γ′ interface can be enhanced due to the partitioning of W to the γ′ phase. Moreover, our results reveal that partitioned W atoms in the γ′ phase contribute to the strengthening of the γ/γ′ interface. Conversely, the dissolution of W atoms in the γ phase weakens the inter-phase cohesion. However, this detrimental effect can be mitigated by introducing of Re into the γ/γ′ interface. Partitioning of Re and W into separate phases yields minimal alterations in interaction energies, resulting in a notable enhancement of inter-phase cohesion when compared to the partitioning of Re and W within γ phase of the γ/γ′ interface. Additionally, the partitioning of solute atoms at the γ/γ′ interface leads to local lattice distortion and interfacial energy reduction, which contribute to the enhancement of inter-phase cohesion of the γ/γ′ interface. As a result, a model is proposed for interpretation of crack propagation at the γ/γ′ interface at the threshold region with the presence of tensile stress in Ni-based single-crystal alloys.
|
|
| 8. |
- Liu, Ye, et al.
(författare)
-
First-principles investigation on the thermodynamic and mechanical properties of Y4Zr3O12 and Y2Ti2O7 oxides in ferritic alloy under helium environment
- 2024
-
Ingår i: Journal of Materials Research and Technology. - : Elsevier. - 2238-7854. ; 29, s. 1872-1886
-
Tidskriftsartikel (refereegranskat)abstract
- This study investigates the thermodynamic and mechanical properties of Y4Zr3O12 and Y2Ti2O7 oxides in ferritic alloys with and without Helium utilizing a systematic first-principles approach. Firstly, the atomic arrangement of Y and Zr atoms at cation 18f sites in δ-(Y–Zr–O) oxide is identified, while it is found that Y4Zr3O12 exhibits a more robust formation tendency than Y2Ti2O7. Furthermore, it is noted that both Y4Zr3O12 and Y2Ti2O7 oxides demonstrate a prior ability to trap Helium compared to the bcc-Fe matrix, which leads to a substantial enhancement on the stiffness of both oxides. The elastic moduli of both Y4Zr3O12 and Y2Ti2O7 oxide exhibit a gradual increase with the growing Helium concentration. As a result, the enhanced shear modulus of oxides and sustained shear modulus of the bcc-Fe matrix collectively contribute to the overall strength of ferritic alloys under Helium environments. The findings in this work propose valuable insights for guiding critical strategies in the design of high-performance oxide-dispersion-strengthened ferritic alloys, particularly for applications in Helium environments.
|
|
| 9. |
- Tan, Qiankun, et al.
(författare)
-
Hydrogen-enhanced decohesion mechanism of the Ni-Ni3X interfaces in precipitation-hardened Ni-based alloys
- 2023
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier. - 0925-8388 .- 1873-4669. ; 963
-
Tidskriftsartikel (refereegranskat)abstract
- Ni and its alloys are susceptible to hydrogen embrittlement. In this study, we investigate the phenomenon of hydrogen-enhanced decohesion at inter-phase interfaces in precipitation-hardened Ni-based alloys using a systematic first-principles approach. We demonstrate that hydrogen atoms primarily prefer to localize at the Ni3Al phase in the Ni/Ni3Al interface, while they tend to be trapped by Ni in the Ni/Ni3Nb interface. Our findings reveal that hydrogen induces inter-phase embrittlement in both the Ni/Ni3Al and Ni/Ni3Nb interfaces. Moreover, we show that the hydrogen-enhanced decohesion at these interfaces is influenced by various factors such as hydrogen pressure, hydrogen content, temperature, and strain. Finally, we discuss in detail the hydrogen-enhanced decohesion mechanisms at the Ni/Ni3Al and Ni/Ni3Nb interfaces, including their electronic structures, energy landscape of hydrogen at trapping sites, and schematics of crack propagation.
|
|
| 10. |
- Wang, Y.-D., et al.
(författare)
-
Grain-to-grain stress interactions in an electrodeposited iron coating
- 2005
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 17:10, s. 1221-1226
-
Tidskriftsartikel (refereegranskat)abstract
- The distribution of residual stresses, in an iron electrolytic coating with the thickness of 1 mm, was discussed. It was found that the coating minimizes the influence of crystallographic texture and stress gradients. Scanning electron microscopy observations indicate that some cracks are produced in the direct current deposited layer. The results show that the grain size in the electrolytic coating observed by transmission electron microscopy is around 20 nm with an aspect ratio of 5:1
|
|
