| 1. |
|
|
| 2. |
- Beal, Jacob, et al.
(författare)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
Ingår i: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Tidskriftsartikel (refereegranskat)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 3. |
- Aad, G, et al.
(författare)
-
- 2015
-
swepub:Mat__t
|
|
| 4. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 5. |
|
|
| 6. |
|
|
| 7. |
- Zhang, S. -N, et al.
(författare)
-
Introduction to the high energy cosmic-radiation detection (HERD) facility onboard China's future space station
- 2017
-
Ingår i: Proceedings of Science. - : Sissa Medialab Srl.
-
Konferensbidrag (refereegranskat)abstract
- The High Energy cosmic-Radiation Detection (HERD) facility is one of several space astronomy payloads onboard China's Space Station, which is planned for operation starting around 2025 for about 10 years. The main scientific objectives of HERD are searching for signals of dark matter annihilation products, precise cosmic electron (plus positron) spectrum and anisotropy measurements up to 10 TeV, precise cosmic ray spectrum and composition measurements up to the knee energy, and high energy gamma-ray monitoring and survey. HERD is composed of a 3-D cubic calorimeter (CALO) surrounded by microstrip silicon trackers (STKs) from five sides except the bottom. CALO is made of about 7,500 cubes of LYSO crystals, corresponding to about 55 radiation lengths and 3 nuclear interaction lengths, respectively. The top STK microstrips of six X-Y layers are sandwiched with tungsten converters to make precise directional measurements of incoming electrons and gamma-rays. In the baseline design, each of the four side STKs is made of only three layers microstrips. All STKs will also be used for measuring the charge and incoming directions of cosmic rays, as well as identifying back scattered tracks. With this design, HERD can achieve the following performance: energy resolution of 1% for electrons and gamma-rays beyond 100 GeV and 20% for protons from 100 GeV to 1 PeV; electron/proton separation power better than 10-5; effective geometrical factors of >3 m2sr for electron and diffuse gamma-rays, >2 m2sr for cosmic ray nuclei. R&D is under way for reading out the LYSO signals with optical fiber coupled to image intensified IsCMOS and CALO prototype of 250 LYSO crystals.
|
|
| 8. |
- Bai, Fan, et al.
(författare)
-
Application of similarity theory in modeling the output characteristics of proton exchange membrane fuel cell
- 2021
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 46:74, s. 36940-36953
-
Tidskriftsartikel (refereegranskat)abstract
- Proton Exchange Membrane Fuel Cell (PEMFC) has attracted widespread interest. In the present work, similarity analysis is adopted for a three-dimensional single-phase isothermal model of PEMFC to derive similarity criteria. Seven kinds of input criteria (Pi(1) similar to Pi(7)) are obtained, relevant to the fluid flow, pressure drop, flow resistance in a porous medium, activity loss, diffusion mass transfer, convective mass transfer and ohmic loss in PEMFC respectively. Dimensionless voltage and dimensionless current density are defined as two output criteria. Numerical verifications show that if the seven criteria keep their individual values with their components vary in a wide range, the dimensionless polarization curves keep the same with a deviation about 1%, showing the validity and feasibility of the present analysis. From the effect on the dimensionless polarization curve, sensibility analysis shows that the seven criteria can be divided into three categories: strong (Pi(4) and Pi(7), -94.9% similar to +349.2%), mild to minor (Pi(5) and Pi(6), -4.5% similar to +5.0%), and negligible (Pi(1), Pi(2) and Pi(3), -1.2% similar to +1.1%). The similarity analysis approach can greatly save computation time in modeling the output characteristics of PEMFC. (C) 2021 Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC.
|
|
| 9. |
- Chen, Zhibin, et al.
(författare)
-
Summary of the 3rd International Workshop on Gas-Dynamic Trap based Fusion Neutron Source (GDT-FNS)
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:6
-
Tidskriftsartikel (refereegranskat)abstract
- The 3rd International Workshop on Gas-Dynamic Trap-based Fusion Neutron Source (GDT-FNS) was held through the hybrid mode on 13-14 September 2021 in Hefei, China, jointly organized by the Hefei Institutes of Physical Science (HFIPS), Chinese Academy of Sciences (CAS), and the Budker Institute of Nuclear Physics (BINP), Russian Academy of Sciences (RAS). It followed the 1st GDT-FNS Workshop held in November 2018 in Hefei, China, and the 2nd taking place in November 2019 in Novosibirsk, Russian Federation. With the financial support from CAS and China Association for Science and Technology (CAST), this workshop was attended by more than 80 participants representing 20 institutes and universities from seven countries, with oral presentations broadcast via the Zoom conferencing system. Twenty-two presentations were made with topics covering design and key technologies, simulation and experiments, steady-state operation, status of the ALIANCE project, multi applications of neutron sources, and other concepts (Tokamaks, Mirrors, FRC, Plasma Focus, etc). The workshop consensus was made including the establishment of the ALIANCE International Working Group. The next GDT-FNS workshop is planned to be held in May 2022 in Novosibirsk.
|
|
| 10. |
- Dong, Yi-Min, et al.
(författare)
-
Development and Validation of a Nomogram for Assessing Survival in Patients With COVID-19 Pneumonia
- 2021
-
Ingår i: Clinical Infectious Diseases. - : Oxford University Press. - 1058-4838 .- 1537-6591. ; 72:4, s. 652-660
-
Tidskriftsartikel (refereegranskat)abstract
- Background. The outbreak of coronavirus disease 2019 (COVID-19) has spread worldwide and continues to threaten peoples' health as well as put pressure on the accessibility of medical systems. Early prediction of survival of hospitalized patients will help in the clinical management of COVID-19, but a prediction model that is reliable and valid is still lacking. Methods. We retrospectively enrolled 628 confirmed cases of COVID-19 using positive RT-PCR tests for SARS-CoV-2 in Tongji Hospital, Wuhan, China. These patients were randomly grouped into a training (60%) and a validation (40%) cohort. In the training cohort, LASSO regression analysis and multivariate Cox regression analysis were utilized to identify prognostic factors for in-hospital survival of patients with COVID-19. A nomogram based on the 3 variables was built for clinical use. AUCs, concordance indexes (C-index), and calibration curves were used to evaluate the efficiency of the nomogram in both training and validation cohorts. Results. Hypertension, higher neutrophil-to-lymphocyte ratio, and increased NT-proBNP values were found to be significantly associated with poorer prognosis in hospitalized patients with COVID-19. The 3 predictors were further used to build a prediction nomogram. The C-indexes of the nomogram in the training and validation cohorts were 0.901 and 0.892, respectively. The AUC in the training cohort was 0.922 for 14-day and 0.919 for 21-day probability of in-hospital survival, while in the validation cohort this was 0.922 and 0.881, respectively. Moreover, the calibration curve for 14- and 21-day survival also showed high coherence between the predicted and actual probability of survival. Conclusions. We built a predictive model and constructed a nomogram for predicting in-hospital survival of patients with COVID-19. This model has good performance and might be utilized clinically in management of COVID-19.
|
|
