| 1. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 2. |
- Nilsson, C. L., et al.
(författare)
-
Chromosome 19 Annotations with Disease Speciation: A First Report from the Global Research Consortium
- 2013
-
Ingår i: Journal of Proteome Research. - : American Chemical Society (ACS). - 1535-3893 .- 1535-3907. ; 12:1, s. 134-149
-
Tidskriftsartikel (refereegranskat)abstract
- A first research development progress report of the Chromosome 19 Consortium with members from Sweden, Norway, Spain, United States, China and India, a part of the Chromosome-centric Human Proteome Project (C-HPP) global initiative, is presented (http://www.c-hpp.org). From the chromosome 19 peptide-targeted library constituting 6159 peptides, a pilot study was conducted using a subset with 125 isotope-labeled peptides. We applied an annotation strategy with triple quadrupole, ESI-Qtrap, and MALDI mass spectrometry platforms, comparing the quality of data within and in between these instrumental set-ups. LC–MS conditions were outlined by multiplex assay developments, followed by MRM assay developments. SRM was applied to biobank samples, quantifying kallikrein 3 (prostate specific antigen) in plasma from prostate cancer patients. The antibody production has been initiated for more than 1200 genes from the entire chromosome 19, and the progress developments are presented. We developed a dedicated transcript microarray to serve as the mRNA identifier by screening cancer cell lines. NAPPA protein arrays were built to align with the transcript data with the Chromosome 19 NAPPA chip, dedicated to 90 proteins, as the first development delivery. We have introduced an IT-infrastructure utilizing a LIMS system that serves as the key interface for the research teams to share and explore data generated within the project. The cross-site data repository will form the basis for sample processing, including biological samples as well as patient samples from national Biobanks.
|
|
| 3. |
- van Delft, Falco C. M. J. M., et al.
(författare)
-
Roadmap for network-based biocomputation
- 2022
-
Ingår i: Nano Futures. - : Institute of Physics Publishing (IOPP). - 2399-1984. ; 6:3
-
Forskningsöversikt (refereegranskat)abstract
- Network-based biocomputation (NBC) is an alternative, parallel computation approach that can potentially solve technologically important, combinatorial problems with much lower energy consumption than electronic processors. In NBC, a combinatorial problem is encoded into a physical, nanofabricated network. The problem is solved by biological agents (such as cytoskeletal filaments driven by molecular motors) that explore all possible pathways through the network in a massively parallel and highly energy-efficient manner. Whereas there is currently a rapid development in the size and types of problems that can be solved by NBC in proof-of-principle experiments, significant challenges still need to be overcome before NBC can be scaled up to fill a technological niche and reach an industrial level of manufacturing. Here, we provide a roadmap that identifies key scientific and technological needs. Specifically, we identify technology benchmarks that need to be reached or overcome, as well as possible solutions for how to achieve this. These include methods for large-scale production of nanoscale physical networks, for dynamically changing pathways in these networks, for encoding information onto biological agents, for single-molecule readout technology, as well as the integration of each of these approaches in large-scale production. We also introduce figures of merit that help analyze the scalability of various types of NBC networks and we use these to evaluate scenarios for major technological impact of NBC. A major milestone for NBC will be to increase parallelization to a point where the technology is able to outperform the current run time of electronic processors. If this can be achieved, NBC would offer a drastic advantage in terms of orders of magnitude lower energy consumption. In addition, the fundamentally different architecture of NBC compared to conventional electronic computers may make it more advantageous to use NBC to solve certain types of problems and instances that are easy to parallelize. To achieve these objectives, the purpose of this roadmap is to identify pre-competitive research domains, enabling cooperation between industry, institutes, and universities for sharing research and development efforts and reducing development cost and time.
|
|
| 4. |
- Castro-González, A., et al.
(författare)
-
The K2-OjOS Project*New and revisited planets and candidates in K2 campaigns 5, 16, & 18
- 2022
-
Ingår i: Monthly Notices of the Royal Astronomical Society. - : Oxford University Press (OUP). - 0035-8711 .- 1365-2966. ; 509:1, s. 1075-1095
-
Tidskriftsartikel (refereegranskat)abstract
- We present the first results of K2-OjOS, a collaborative project between professional and amateur astronomers primarily aimed to detect, characterize, and validate new extrasolar planets. For this work, 10 amateur astronomers looked for planetary signals by visually inspecting the 20 427 light curves of K2 campaign 18 (C18). They found 42 planet candidates, of which 18 are new detections and 24 had been detected in the overlapping C5 by previous works. We used archival photometric and spectroscopic observations, as well as new high-spatial resolution images in order to carry out a complete analysis of the candidates found, including a homogeneous characterization of the host stars, transit modelling, search for transit timing variations and statistical validation. As a result, we report four new planets (K2-355 b, K2-356 b, K2-357 b, and K2-358 b) and 14 planet candidates. Besides, we refine the transit ephemeris of the previously published planets and candidates by modelling C5, C16 (when available) and C18 photometric data jointly, largely improving the period and mid-transit time precision. Regarding individual systems, we highlight the new planet K2-356 b and candidate EPIC 211537087.02 being near a 2:1 period commensurability, the detection of significant TTVs in the bright star K2-184 (V = 10.35), the location of K2-103 b inside the habitable zone according to optimistic models, the detection of a new single transit in the known system K2-274, and the disposition reassignment of K2-120 b, which we consider as a planet candidate as the origin of the signal cannot be ascertained.
|
|
| 5. |
- Martins Dos Santos, Vitor, et al.
(författare)
-
Systems Biology in ELIXIR: modelling in the spotlight
- 2022
-
Ingår i: F1000Research. - : F1000 Research Ltd. - 1759-796X .- 2046-1402. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- In this white paper, we describe the founding of a new ELIXIR Community - the Systems Biology Community - and its proposed future contributions to both ELIXIR and the broader community of systems biologists in Europe and worldwide. The Community believes that the infrastructure aspects of systems biology - databases, (modelling) tools and standards development, as well as training and access to cloud infrastructure - are not only appropriate components of the ELIXIR infrastructure, but will prove key components of ELIXIR's future support of advanced biological applications and personalised medicine. By way of a series of meetings, the Community identified seven key areas for its future activities, reflecting both future needs and previous and current activities within ELIXIR Platforms and Communities. These are: overcoming barriers to the wider uptake of systems biology; linking new and existing data to systems biology models; interoperability of systems biology resources; further development and embedding of systems medicine; provisioning of modelling as a service; building and coordinating capacity building and training resources; and supporting industrial embedding of systems biology. A set of objectives for the Community has been identified under four main headline areas: Standardisation and Interoperability, Technology, Capacity Building and Training, and Industrial Embedding. These are grouped into short-term (3-year), mid-term (6-year) and long-term (10-year) objectives.
|
|
| 6. |
- Alcamán, M. Estrella, et al.
(författare)
-
Physiological and gene expression responses to nitrogen regimes and temperatures in Mastigocladus sp strain CHP1, a predominant thermotolerant cyanobacterium of hot springs
- 2017
-
Ingår i: Systematic and Applied Microbiology. - : Elsevier BV. - 0723-2020 .- 1618-0984. ; 40:2, s. 102-113
-
Tidskriftsartikel (refereegranskat)abstract
- Cyanobacteria are widely distributed primary producers with significant implications for the global biogeochemical cycles of carbon and nitrogen. Diazotrophic cyanobacteria of subsection V (Order Stigonematales) are particularly ubiquitous in photoautotrophic microbial mats of hot springs. The Stigonematal cyanobacterium strain CHPI isolated from the Porcelana hot spring (Chile) was one of the major contributors of the new nitrogen through nitrogen fixation. Further morphological and genetic characterization verified that the strain CHP1 belongs to Stigonematales, and it formed a separate Glade together with other thermophiles of the genera Fischerella and Mastigocladus. Strain CHP1 fixed maximum N-2 in the light, independent of the temperature range. At 50 degrees C niJH gene transcripts showed high expression during the light period, whereas the nifH gene expression at 45 degrees C was arrhythmic. The strain displayed a high affinity for nitrate and a low tolerance for high ammonium concentrations, whereas the narB and glnA genes showed higher expression in light and at the beginning of the dark phase. It is proposed that Mastigocladus sp. strain CHPI would represent a good model for the study of subsection V thermophilic cyanobacteria, and for understanding the adaptations of these photoautotrophic organisms inhabiting microbial mats in hot springs globally.
|
|
| 7. |
- Alcusa-Sáez, E. P., et al.
(författare)
-
Acousto-optic interaction in polyimide coated optical fibers with flexural waves
- 2017
-
Ingår i: Optics Express. - : Optical Society of America. - 1094-4087. ; 25:15, s. 17167-17173
-
Tidskriftsartikel (refereegranskat)abstract
- Acousto-optic coupling in polyimide-coated single-mode optical fibers using flexural elastic waves is demonstrated. The effect of the polyimide coating on the acousto-optic interaction process is analyzed in detailed. Theoretical and experimental results are in good agreement. Although the elastic attenuation is significant, we show that acousto-optic coupling can be produced with a reasonably good efficiency. To our knowledge, it is the first experimental demonstration of acousto-optic coupling in optical fibers with robust protective coating.
|
|
| 8. |
- Díez-Maroto, L., et al.
(författare)
-
A WACS exploiting generator Excitation Boosters for power system transient stability enhancement
- 2017
-
Ingår i: Electric power systems research. - : Elsevier Ltd. - 0378-7796 .- 1873-2046. ; 148, s. 245-253
-
Tidskriftsartikel (refereegranskat)abstract
- Excitation Boosters (EB) are designed to improve transient stability of synchronous generators equipped with bus fed static excitation systems. They can be controlled using either local or remote signals following a disturbance. This paper explores how critical clearing times (CCT) can be improved by EBs controlled using remote signals. Particularly, Pseudo Center of Inertia (PCOI) and Dominant Interarea Path (DIP) signals derived from Phasor Measurement Units (PMU) within a Wide Area Control System (WACS) are used. Prototype controllers are tested by means of a Real Time (RT) Hardware-in-the-Loop (HIL) experimental setup.
|
|
| 9. |
- Acevedo, F., et al.
(författare)
-
Degradation of polycyclic aromatic hydrocarbons by the Chilean white-rot fungus Anthracophyllum discolor
- 2011
-
Ingår i: Journal of Hazardous Materials. - : Elsevier BV. - 0304-3894 .- 1873-3336. ; 185:1, s. 212-219
-
Tidskriftsartikel (refereegranskat)abstract
- The degradation of three- and four-ring polycyclic aromatic hydrocarbons (PAHs) in Kirk medium by Anthracophyllum discolor, a white-rot fungus isolated from the forest of southern Chile, was evaluated. In addition, the removal efficiency of three-, four- and five-ring PAHs in contaminated soil bioaugmented with A. discolor in the absence and presence of indigenous soil microorganisms was investigated. Production of lignin-degrading enzymes and PAH mineralization in the soil were also determined. A. discolor was able to degrade PAHs in Kirk medium with the highest removal occurring in a PAH mixture, suggesting synergistic effects between PAHs or possible cometabolism. A high removal capability for phenanthrene (62%), anthracene (73%), fluoranthene (54%), pyrene (60%) and benzo(a)pyrene (75%) was observed in autoclaved soil inoculated with A. discolor in the absence of indigenous microorganisms, associated with the production of manganese peroxidase (MnP). The metabolites found in the PAH degradation were anthraquinone, phthalic acid, 4-hydroxy-9-fluorenone, 9-fluorenone and 4,5-dihydropyrene. A. discolor was able to mineralize 9% of the phenanthrene. In non-autoclaved soil, the inoculation with A. discolor did not improve the removal efficiency of PAHs. Suitable conditions must be found to promote a successful fungal bioaugmentation in non-autoclaved soils. © 2010 Elsevier B.V.
|
|
| 10. |
- Barba, Albert, et al.
(författare)
-
Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds : Effect of Nanostructure and Pore Architecture
- 2017
-
Ingår i: ACS Applied Materials and Interfaces. - : American Chemical Society (ACS). - 1944-8244 .- 1944-8252. ; 9:48, s. 41722-41736
-
Tidskriftsartikel (refereegranskat)abstract
- Some biomaterials are osteoinductive, that is, they are able to trigger the osteogenic process by inducing the differentiation of mesenchymal stem cells to the osteogenic lineage. Although the underlying mechanism is still unclear, microporosity and specific surface area (SSA) have been identified as critical factors in material-associated osteoinduction. However, only sintered ceramics, which have a limited range of porosities and SSA, have been analyzed so far. In this work, we were able to extend these ranges to the nanoscale, through the foaming and 3D-printing of biomimetic calcium phosphates, thereby obtaining scaffolds with controlled micro- and nanoporosity and with tailored macropore architectures. Calcium-deficient hydroxyapatite (CDHA) scaffolds were evaluated after 6 and 12 weeks in an ectopic-implantation canine model and compared with two sintered ceramics, biphasic calcium phosphate and β-tricalcium phosphate. Only foams with spherical, concave macropores and not 3Dprinted scaffolds with convex, prismatic macropores induced significant ectopic bone formation. Among them, biomimetic nanostructured CDHA produced the highest incidence of ectopic bone and accelerated bone formation when compared with conventional microstructured sintered calcium phosphates with the same macropore architecture. Moreover, they exhibited different bone formation patterns; in CDHA foams, the new ectopic bone progressively replaced the scaffold, whereas in sintered biphasic calcium phosphate scaffolds, bone was deposited on the surface of the material, progressively filling the pore space. In conclusion, this study demonstrates that the high reactivity of nanostructured biomimetic CDHA combined with a spherical, concave macroporosity allows the pushing of the osteoinduction potential beyond the limits of microstructured calcium phosphate ceramics.
|
|
