| 1. |
|
|
| 2. |
|
|
| 3. |
- de Graaf, Nine, et al.
(författare)
-
Minimally invasive versus open pancreatoduodenectomy for pancreatic and peri-ampullary neoplasm (DIPLOMA-2) : study protocol for an international multicenter patient-blinded randomized controlled trial
- 2023
-
Ingår i: Trials. - : BioMed Central Ltd. - 1745-6215. ; 24:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Minimally invasive pancreatoduodenectomy (MIPD) aims to reduce the negative impact of surgery as compared to open pancreatoduodenectomy (OPD) and is increasingly becoming part of clinical practice for selected patients worldwide. However, the safety of MIPD remains a topic of debate and the potential shorter time to functional recovery needs to be confirmed. To guide safe implementation of MIPD, large-scale international randomized trials comparing MIPD and OPD in experienced high-volume centers are needed. We hypothesize that MIPD is non-inferior in terms of overall complications, but superior regarding time to functional recovery, as compared to OPD. Methods/design: The DIPLOMA-2 trial is an international randomized controlled, patient-blinded, non-inferiority trial performed in 14 high-volume pancreatic centers in Europe with a minimum annual volume of 30 MIPD and 30 OPD. A total of 288 patients with an indication for elective pancreatoduodenectomy for pre-malignant and malignant disease, eligible for both open and minimally invasive approach, are randomly allocated for MIPD or OPD in a 2:1 ratio. Centers perform either laparoscopic or robot-assisted MIPD based on their surgical expertise. The primary outcome is the Comprehensive Complication Index (CCI®), measuring all complications graded according to the Clavien-Dindo classification up to 90 days after surgery. The sample size is calculated with the following assumptions: 2.5% one-sided significance level (α), 80% power (1-β), expected difference of the mean CCI® score of 0 points between MIPD and OPD, and a non-inferiority margin of 7.5 points. The main secondary outcome is time to functional recovery, which will be analyzed for superiority. Other secondary outcomes include post-operative 90-day Fitbit™ measured activity, operative outcomes (e.g., blood loss, operative time, conversion to open surgery, surgeon-reported outcomes), oncological findings in case of malignancy (e.g., R0-resection rate, time to adjuvant treatment, survival), postoperative outcomes (e.g., clinically relevant complications), healthcare resource utilization (length of stay, readmissions, intensive care stay), quality of life, and costs. Postoperative follow-up is up to 36 months. Discussion: The DIPLOMA-2 trial aims to establish the safety of MIPD as the new standard of care for this selected patient population undergoing pancreatoduodenectomy in high-volume centers, ultimately aiming for superior patient recovery. Trial registration: ISRCTN27483786. Registered on August 2, 2023. © 2023, BioMed Central Ltd., part of Springer Nature.
|
|
| 4. |
- Todde, S., et al.
(författare)
-
Guidance on validation and qualification of processes and operations involving radiopharmaceuticals
- 2017
-
Ingår i: EJNMMI Radiopharmacy and Chemistry. - : Springer. - 2365-421X. ; 2:1
-
Forskningsöversikt (refereegranskat)abstract
- Validation and qualification activities are nowadays an integral part of the day by day routine work in a radiopharmacy. This document is meant as an Appendix of Part B of the EANM "Guidelines on Good Radiopharmacy Practice (GRPP)" issued by the Radiopharmacy Committee of the EANM, covering the qualification and validation aspects related to the small-scale "in house" preparation of radiopharmaceuticals. The aim is to provide more detailed and practice-oriented guidance to those who are involved in the small-scale preparation of radiopharmaceuticals which are not intended for commercial purposes or distribution.
|
|
| 5. |
- Van Velthoven, Arianne J. H., et al.
(författare)
-
Future directions in managing aniridia-associated keratopathy
- 2023
-
Ingår i: Survey of ophthalmology. - : ELSEVIER SCIENCE INC. - 0039-6257 .- 1879-3304. ; 68:5, s. 940-956
-
Forskningsöversikt (refereegranskat)abstract
- Congenital aniridia is a panocular disorder that is typically characterized by iris hypoplasia and aniridia-associated keratopathy (AAK). AAK results in the progressive loss of corneal transparency and thereby loss of vision. Currently, there is no approved therapy to delay or prevent its progression, and clinical management is challenging because of phenotypic variability and high risk of complications after interventions; however, new insights into the molecular pathogenesis of AAK may help improve its management. Here, we review the current understanding about the pathogenesis and management of AAK. We highlight the biological mechanisms involved in AAK development with the aim to develop future treatment options, including surgical, pharmacological, cell therapies, and gene therapies.
|
|
| 6. |
- Backes, Claudia, et al.
(författare)
-
Production and processing of graphene and related materials
- 2020
-
Ingår i: 2D Materials. - : IOP Publishing. - 2053-1583. ; 7:2
-
Tidskriftsartikel (refereegranskat)abstract
- We present an overview of the main techniques for production and processing of graphene and related materials (GRMs), as well as the key characterization procedures. We adopt a 'hands-on' approach, providing practical details and procedures as derived from literature as well as from the authors' experience, in order to enable the reader to reproduce the results. Section I is devoted to 'bottom up' approaches, whereby individual constituents are pieced together into more complex structures. We consider graphene nanoribbons (GNRs) produced either by solution processing or by on-surface synthesis in ultra high vacuum (UHV), as well carbon nanomembranes (CNM). Production of a variety of GNRs with tailored band gaps and edge shapes is now possible. CNMs can be tuned in terms of porosity, crystallinity and electronic behaviour. Section II covers 'top down' techniques. These rely on breaking down of a layered precursor, in the graphene case usually natural crystals like graphite or artificially synthesized materials, such as highly oriented pyrolythic graphite, monolayers or few layers (FL) flakes. The main focus of this section is on various exfoliation techniques in a liquid media, either intercalation or liquid phase exfoliation (LPE). The choice of precursor, exfoliation method, medium as well as the control of parameters such as time or temperature are crucial. A definite choice of parameters and conditions yields a particular material with specific properties that makes it more suitable for a targeted application. We cover protocols for the graphitic precursors to graphene oxide (GO). This is an important material for a range of applications in biomedicine, energy storage, nanocomposites, etc. Hummers' and modified Hummers' methods are used to make GO that subsequently can be reduced to obtain reduced graphene oxide (RGO) with a variety of strategies. GO flakes are also employed to prepare three-dimensional (3d) low density structures, such as sponges, foams, hydro- or aerogels. The assembly of flakes into 3d structures can provide improved mechanical properties. Aerogels with a highly open structure, with interconnected hierarchical pores, can enhance the accessibility to the whole surface area, as relevant for a number of applications, such as energy storage. The main recipes to yield graphite intercalation compounds (GICs) are also discussed. GICs are suitable precursors for covalent functionalization of graphene, but can also be used for the synthesis of uncharged graphene in solution. Degradation of the molecules intercalated in GICs can be triggered by high temperature treatment or microwave irradiation, creating a gas pressure surge in graphite and exfoliation. Electrochemical exfoliation by applying a voltage in an electrolyte to a graphite electrode can be tuned by varying precursors, electrolytes and potential. Graphite electrodes can be either negatively or positively intercalated to obtain GICs that are subsequently exfoliated. We also discuss the materials that can be amenable to exfoliation, by employing a theoretical data-mining approach. The exfoliation of LMs usually results in a heterogeneous dispersion of flakes with different lateral size and thickness. This is a critical bottleneck for applications, and hinders the full exploitation of GRMs produced by solution processing. The establishment of procedures to control the morphological properties of exfoliated GRMs, which also need to be industrially scalable, is one of the key needs. Section III deals with the processing of flakes. (Ultra)centrifugation techniques have thus far been the most investigated to sort GRMs following ultrasonication, shear mixing, ball milling, microfluidization, and wet-jet milling. It allows sorting by size and thickness. Inks formulated from GRM dispersions can be printed using a number of processes, from inkjet to screen printing. Each technique has specific rheological requirements, as well as geometrical constraints. The solvent choice is critical, not only for the GRM stability, but also in terms of optimizing printing on different substrates, such as glass, Si, plastic, paper, etc, all with different surface energies. Chemical modifications of such substrates is also a key step. Sections IV-VII are devoted to the growth of GRMs on various substrates and their processing after growth to place them on the surface of choice for specific applications. The substrate for graphene growth is a key determinant of the nature and quality of the resultant film. The lattice mismatch between graphene and substrate influences the resulting crystallinity. Growth on insulators, such as SiO2, typically results in films with small crystallites, whereas growth on the close-packed surfaces of metals yields highly crystalline films. Section IV outlines the growth of graphene on SiC substrates. This satisfies the requirements for electronic applications, with well-defined graphene-substrate interface, low trapped impurities and no need for transfer. It also allows graphene structures and devices to be measured directly on the growth substrate. The flatness of the substrate results in graphene with minimal strain and ripples on large areas, allowing spectroscopies and surface science to be performed. We also discuss the surface engineering by intercalation of the resulting graphene, its integration with Si-wafers and the production of nanostructures with the desired shape, with no need for patterning. Section V deals with chemical vapour deposition (CVD) onto various transition metals and on insulators. Growth on Ni results in graphitized polycrystalline films. While the thickness of these films can be optimized by controlling the deposition parameters, such as the type of hydrocarbon precursor and temperature, it is difficult to attain single layer graphene (SLG) across large areas, owing to the simultaneous nucleation/growth and solution/precipitation mechanisms. The differing characteristics of polycrystalline Ni films facilitate the growth of graphitic layers at different rates, resulting in regions with differing numbers of graphitic layers. High-quality films can be grown on Cu. Cu is available in a variety of shapes and forms, such as foils, bulks, foams, thin films on other materials and powders, making it attractive for industrial production of large area graphene films. The push to use CVD graphene in applications has also triggered a research line for the direct growth on insulators. The quality of the resulting films is lower than possible to date on metals, but enough, in terms of transmittance and resistivity, for many applications as described in section V. Transfer technologies are the focus of section VI. CVD synthesis of graphene on metals and bottom up molecular approaches require SLG to be transferred to the final target substrates. To have technological impact, the advances in production of high-quality large-area CVD graphene must be commensurate with those on transfer and placement on the final substrates. This is a prerequisite for most applications, such as touch panels, anticorrosion coatings, transparent electrodes and gas sensors etc. New strategies have improved the transferred graphene quality, making CVD graphene a feasible option for CMOS foundries. Methods based on complete etching of the metal substrate in suitable etchants, typically iron chloride, ammonium persulfate, or hydrogen chloride although reliable, are time- and resource-consuming, with damage to graphene and production of metal and etchant residues. Electrochemical delamination in a low-concentration aqueous solution is an alternative. In this case metallic substrates can be reused. Dry transfer is less detrimental for the SLG quality, enabling a deterministic transfer. There is a large range of layered materials (LMs) beyond graphite. Only few of them have been already exfoliated and fully characterized. Section VII deals with the growth of some of these materials. Amongst them, h-BN, transition metal tri- and di-chalcogenides are of paramount importance. The growth of h-BN is at present considered essential for the development of graphene in (opto) electronic applications, as h-BN is ideal as capping layer or substrate. The interesting optical and electronic properties of TMDs also require the development of scalable methods for their production. Large scale growth using chemical/physical vapour deposition or thermal assisted conversion has been thus far limited to a small set, such as h-BN or some TMDs. Heterostructures could also be directly grown. Section VIII discusses advances in GRM functionalization. A broad range of organic molecules can be anchored to the sp(2) basal plane by reductive functionalization. Negatively charged graphene can be prepared in liquid phase (e.g. via intercalation chemistry or electrochemically) and can react with electrophiles. This can be achieved both in dispersion or on substrate. The functional groups of GO can be further derivatized. Graphene can also be noncovalently functionalized, in particular with polycyclic aromatic hydrocarbons that assemble on the sp(2) carbon network by pi-pi stacking. In the liquid phase, this can enhance the colloidal stability of SLG/FLG. Approaches to achieve noncovalent on-substrate functionalization are also discussed, which can chemically dope graphene. Research efforts to derivatize CNMs are also summarized, as well as novel routes to selectively address defect sites. In dispersion, edges are the most dominant defects and can be covalently modified. This enhances colloidal stability without modifying the graphene basal plane. Basal plane point defects can also be modified, passivated and healed in ultra-high vacuum. The decoration of graphene with metal nanoparticles (NPs) has also received considerable attention, as it allows to exploit synergistic effects between NPs and graphene. Decoration can be either achieved chemically or in the gas phase. All LMs,
|
|
| 7. |
- Chen, Jeffrey, et al.
(författare)
-
Robot-Assisted Versus Laparoscopic Distal Pancreatectomy in Patients with Resectable Pancreatic Cancer: An International, Retrospective, Cohort Study
- 2023
-
Ingår i: Annals of Surgical Oncology. - : SPRINGER. - 1068-9265 .- 1534-4681. ; 30, s. 3023-3032
-
Tidskriftsartikel (refereegranskat)abstract
- BackgroundRobot-assisted distal pancreatectomy (RDP) is increasingly used as an alternative to laparoscopic distal pancreatectomy (LDP) in patients with resectable pancreatic cancer but comparative multicenter studies confirming the safety and efficacy of RDP are lacking.MethodsAn international, multicenter, retrospective, cohort study, including consecutive patients undergoing RDP and LDP for resectable pancreatic cancer in 33 experienced centers from 11 countries (2010-2019). The primary outcome was R0-resection. Secondary outcomes included lymph node yield, major complications, conversion rate, and overall survival.ResultsIn total, 542 patients after minimally invasive distal pancreatectomy were included: 103 RDP (19%) and 439 LDP (81%). The R0-resection rate was comparable (75.7% RDP vs. 69.3% LDP, p = 0.404). RDP was associated with longer operative time (290 vs. 240 min, p < 0.001), more vascular resections (7.6% vs. 2.7%, p = 0.030), lower conversion rate (4.9% vs. 17.3%, p = 0.001), more major complications (26.2% vs. 16.3%, p = 0.019), improved lymph node yield (18 vs. 16, p = 0.021), and longer hospital stay (10 vs. 8 days, p = 0.001). The 90-day mortality (1.9% vs. 0.7%, p = 0.268) and overall survival (median 28 vs. 31 months, p = 0.599) did not differ significantly between RDP and LDP, respectively.ConclusionsIn selected patients with resectable pancreatic cancer, RDP and LDP provide a comparable R0-resection rate and overall survival in experienced centers. Although the lymph node yield and conversion rate appeared favorable after RDP, LDP was associated with shorter operating time, less major complications, and shorter hospital stay. The specific benefits associated with each approach should be confirmed by multicenter, randomized trials.
|
|
| 8. |
|
|
| 9. |
- Crespo-Leiro, Maria G., et al.
(författare)
-
European Society of Cardiology Heart Failure Long-Term Registry (ESC-HF-LT): 1-year follow-up outcomes and differences across regions
- 2016
-
Ingår i: European Journal of Heart Failure. - : WILEY-BLACKWELL. - 1388-9842 .- 1879-0844. ; 18:6, s. 613-625
-
Tidskriftsartikel (refereegranskat)abstract
- AimsThe European Society of Cardiology Heart Failure Long-Term Registry (ESC-HF-LT-R) was set up with the aim of describing the clinical epidemiology and the 1-year outcomes of patients with heart failure (HF) with the added intention of comparing differences between participating countries. Methods and resultsThe ESC-HF-LT-R is a prospective, observational registry contributed to by 211 cardiology centres in 21 European and/or Mediterranean countries, all being member countries of the ESC. Between May 2011 and April 2013 it collected data on 12440 patients, 40.5% of them hospitalized with acute HF (AHF) and 59.5% outpatients with chronic HF (CHF). The all-cause 1-year mortality rate was 23.6% for AHF and 6.4% for CHF. The combined endpoint of mortality or HF hospitalization within 1year had a rate of 36% for AHF and 14.5% for CHF. All-cause mortality rates in the different regions ranged from 21.6% to 36.5% in patients with AHF, and from 6.9% to 15.6% in those with CHF. These differences in mortality between regions are thought reflect differences in the characteristics and/or management of these patients. ConclusionThe ESC-HF-LT-R shows that 1-year all-cause mortality of patients with AHF is still high while the mortality of CHF is lower. This registry provides the opportunity to evaluate the management and outcomes of patients with HF and identify areas for improvement.
|
|
| 10. |
- Daruich, Alejandra, et al.
(författare)
-
Congenital aniridia beyond black eyes: From phenotype and novel genetic mechanisms to innovative therapeutic approaches
- 2023
-
Ingår i: Progress in retinal and eye research. - : PERGAMON-ELSEVIER SCIENCE LTD. - 1350-9462 .- 1873-1635. ; 95
-
Forskningsöversikt (refereegranskat)abstract
- Congenital PAX6-aniridia, initially characterized by the absence of the iris, has progressively been shown to be associated with other developmental ocular abnormalities and systemic features making congenital aniridia a complex syndromic disorder rather than a simple isolated disease of the iris. Moreover, foveal hypoplasia is now recognized as a more frequent feature than complete iris hypoplasia and a major visual prognosis determinant, reversing the classical clinical picture of this disease. Conversely, iris malformation is also a feature of various anterior segment dysgenesis disorders caused by PAX6-related developmental genes, adding a level of genetic complexity for accurate molecular diagnosis of aniridia. Therefore, the clinical recognition and differential genetic diagnosis of PAX6-related aniridia has been revealed to be much more challenging than initially thought, and still remains under-investigated. Here, we update specific clinical features of aniridia, with emphasis on their genotype correlations, as well as provide new knowledge regarding the PAX6 gene and its mutational spectrum, and highlight the beneficial utility of clinically implementing targeted Next-Generation Sequencing combined with Whole-Genome Sequencing to increase the genetic diagnostic yield of aniridia. We also present new molecular mechanisms underlying aniridia and aniridia-like phenotypes. Finally, we discuss the appropriate medical and surgical management of aniridic eyes, as well as innovative therapeutic options. Altogether, these combined clinical-genetic approaches will help to accelerate time to diagnosis, provide better determination of the disease prognosis and management, and confirm eligibility for future clinical trials or genetic-specific therapies.
|
|
