SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Frank J) ;lar1:(ltu)"

Sökning: WFRF:(Frank J) > Luleå tekniska universitet

  • Resultat 1-10 av 25
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Abele, H., et al. (författare)
  • Particle physics at the European Spallation Source
  • 2023
  • Ingår i: Physics reports. - : Elsevier. - 0370-1573 .- 1873-6270. ; 1023, s. 1-84
  • Forskningsöversikt (refereegranskat)abstract
    • Presently under construction in Lund, Sweden, the European Spallation Source (ESS) will be the world’s brightest neutron source. As such, it has the potential for a particle physics program with a unique reach and which is complementary to that available at other facilities. This paper describes proposed particle physics activities for the ESS. These encompass the exploitation of both the neutrons and neutrinos produced at the ESS for high precision (sensitivity) measurements (searches).
  •  
2.
  •  
3.
  • Bentham, James, et al. (författare)
  • A century of trends in adult human height
  • 2016
  • Ingår i: eLIFE. - : eLife Sciences Publications Ltd. - 2050-084X. ; 5
  • Tidskriftsartikel (refereegranskat)abstract
    • Being taller is associated with enhanced longevity, and higher education and earnings. We reanalysed 1472 population-based studies, with measurement of height on more than 18.6 million participants to estimate mean height for people born between 1896 and 1996 in 200 countries. The largest gain in adult height over the past century has occurred in South Korean women and Iranian men, who became 20.2 cm (95% credible interval 17.5–22.7) and 16.5 cm (13.3– 19.7) taller, respectively. In contrast, there was little change in adult height in some sub-Saharan African countries and in South Asia over the century of analysis. The tallest people over these 100 years are men born in the Netherlands in the last quarter of 20th century, whose average heights surpassed 182.5 cm, and the shortest were women born in Guatemala in 1896 (140.3 cm; 135.8– 144.8). The height differential between the tallest and shortest populations was 19-20 cm a century ago, and has remained the same for women and increased for men a century later despite substantial changes in the ranking of countries.
  •  
4.
  • Sumaila, U. Rashid, et al. (författare)
  • WTO must ban harmful fisheries subsidies
  • 2021
  • Ingår i: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 374:6567, s. 544-544
  • Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)
  •  
5.
  • Zhou, Bin, et al. (författare)
  • Worldwide trends in diabetes since 1980: A pooled analysis of 751 population-based studies with 4.4 million participants
  • 2016
  • Ingår i: The Lancet. - : Elsevier B.V.. - 0140-6736 .- 1474-547X. ; 387:10027, s. 1513-1530
  • Tidskriftsartikel (refereegranskat)abstract
    • Background: One of the global targets for non-communicable diseases is to halt, by 2025, the rise in the age standardised adult prevalence of diabetes at its 2010 levels. We aimed to estimate worldwide trends in diabetes, how likely it is for countries to achieve the global target, and how changes in prevalence, together with population growth and ageing, are aff ecting the number of adults with diabetes.Methods: We pooled data from population-based studies that had collected data on diabetes through measurement of its biomarkers. We used a Bayesian hierarchical model to estimate trends in diabetes prevalence-defined as fasting plasma glucose of 7.0 mmol/L or higher, or history of diagnosis with diabetes, or use of insulin or oral hypoglycaemic drugs-in 200 countries and territories in 21 regions, by sex and from 1980 to 2014. We also calculated the posterior probability of meeting the global diabetes target if post-2000 trends continue.Findings: We used data from 751 studies including 4372000 adults from 146 of the 200 countries we make estimates for. Global age-standardised diabetes prevalence increased from 4.3% (95% credible interval 2.4-17.0) in 1980 to 9.0% (7.2-11.1) in 2014 in men, and from 5.0% (2.9-7.9) to 7.9% (6.4-9.7) in women. The number of adults with diabetes in the world increased from 108 million in 1980 to 422 million in 2014 (28.5% due to the rise in prevalence, 39.7% due to population growth and ageing, and 31.8% due to interaction of these two factors). Age-standardised adult diabetes prevalence in 2014 was lowest in northwestern Europe, and highest in Polynesia and Micronesia, at nearly 25%, followed by Melanesia and the Middle East and north Africa. Between 1980 and 2014 there was little change in age-standardised diabetes prevalence in adult women in continental western Europe, although crude prevalence rose because of ageing of the population. By contrast, age-standardised adult prevalence rose by 15 percentage points in men and women in Polynesia and Micronesia. In 2014, American Samoa had the highest national prevalence of diabetes (>30% in both sexes), with age-standardised adult prevalence also higher than 25% in some other islands in Polynesia and Micronesia. If post-2000 trends continue, the probability of meeting the global target of halting the rise in the prevalence of diabetes by 2025 at the 2010 level worldwide is lower than 1% for men and is 1% for women. Only nine countries for men and 29 countries for women, mostly in western Europe, have a 50% or higher probability of meeting the global target.Interpretation: Since 1980, age-standardised diabetes prevalence in adults has increased, or at best remained unchanged, in every country. Together with population growth and ageing, this rise has led to a near quadrupling of the number of adults with diabetes worldwide. The burden of diabetes, both in terms of prevalence and number of adults aff ected, has increased faster in low-income and middle-income countries than in high-income countries.
  •  
6.
  • Arridge, Christopher S., et al. (författare)
  • Uranus Pathfinder : exploring the origins and evolution of Ice Giant planets
  • 2012
  • Ingår i: Experimental astronomy. - : Springer Science and Business Media LLC. - 0922-6435 .- 1572-9508. ; 33:2-3, s. 753-791
  • Tidskriftsartikel (refereegranskat)abstract
    • The "Ice Giants" Uranus and Neptune are a different class of planet compared to Jupiter and Saturn. Studying these objects is important for furthering our understanding of the formation and evolution of the planets, and unravelling the fundamental physical and chemical processes in the Solar System. The importance of filling these gaps in our knowledge of the Solar System is particularly acute when trying to apply our understanding to the numerous planetary systems that have been discovered around other stars. The Uranus Pathfinder (UP) mission thus represents the quintessential aspects of the objectives of the European planetary community as expressed in ESA's Cosmic Vision 2015-2025. UP was proposed to the European Space Agency's M3 call for medium-class missions in 2010 and proposed to be the first orbiter of an Ice Giant planet. As the most accessible Ice Giant within the M-class mission envelope Uranus was identified as the mission target. Although not selected for this call the UP mission concept provides a baseline framework for the exploration of Uranus with existing low-cost platforms and underlines the need to develop power sources suitable for the outer Solar System. The UP science case is based around exploring the origins, evolution, and processes at work in Ice Giant planetary systems. Three broad themes were identified: (1) Uranus as an Ice Giant, (2) An Ice Giant planetary system, and (3) An asymmetric magnetosphere. Due to the long interplanetary transfer from Earth to Uranus a significant cruise-phase science theme was also developed. The UP mission concept calls for the use of a Mars Express/Rosetta-type platform to launch on a Soyuz-Fregat in 2021 and entering into an eccentric polar orbit around Uranus in the 2036-2037 timeframe. The science payload has a strong heritage in Europe and beyond and requires no significant technology developments.
  •  
7.
  • Schneider, J., et al. (författare)
  • Additive manufacturing of a metallic optical bench—process development, material qualification and demonstration
  • 2023
  • Ingår i: CEAS Space Journal. - : Springer Nature. - 1868-2502 .- 1868-2510. ; 15:1, s. 55-68
  • Tidskriftsartikel (refereegranskat)abstract
    • With the large-class science mission ATHENA, the European Space Agency (ESA) aims at exploring the hot and energetic universe with advanced X-Ray technology. As a central component of the telescope, hundreds of silicon pore optic (SPO) modules will be assembled in an optical bench with a diameter of about 2.5 m. Several approaches are under investigation for the manufacturing of this supporting structure, and for handling the challenging constraints with respect to size, geometry and material. In cooperation with ESA, the Fraunhofer IWS is currently investigating the manufacturing of the optical bench made from Ti-6Al-4 V by means of Additive Manufacturing using Laser Metal Deposition (LMD) followed by subtractive finishing. Several development steps have been covered in a holistic manner starting with the system engineering of the production site. The main focus of the activity was on the process development for the Additive Manufacturing as well as the subtractive finishing. Furthermore, the properties of the produced material were also investigated. Within the scope of this publication, a general overview is given about the project related developments, achievements, and flanking activities for solving various challenges. The suitability of the developed technologies and workflows are now being evaluated through the manufacture of a representative, large-scale breadboard.
  •  
8.
  • Schneider, J., et al. (författare)
  • Advanced manufacturing approach via the combination of selective laser melting and laser metal deposition
  • 2019
  • Ingår i: Journal of laser applications. - : Laser Institute of America. - 1042-346X .- 1938-1387. ; 31:2
  • Tidskriftsartikel (refereegranskat)abstract
    • Additive manufacturing processes are frequently discussed in a competitive manner instead of being considered synergetically. This is particularly unfavorable since advanced machining processes in combination with additive manufacturing can be brought to the point that the results could not be achieved with the individual constituent processes in isolation [K. Gupta, R. F. Laubscher, and N. K. Jain, Hybrid Machining Processes—Perspectives on Machining and Finishing (Springer, New York, 2016), p. 68]. On that basis, boundary conditions from selective laser melting (SLM) and laser metal deposition (LMD) are considered in mutual contemplation [A. Seidel et al., in Proceedings of 36th International Congress on Applications of Laser & Electro-Optics, Atlanta, GA, 22–26 October 2017(Fraunhofer IWS, Dresden, 2017), pp. 6–8]. The present approach interlinks the enormous geometrical freedom of powder-bed processing with the scalability of the LMD process. To demonstrate the potential of this approach, two different strategies are pursued. Firstly, a hollow structure demonstrator is manufactured layer wise via LMD with powder and subsequently joined with geometrically complex elements produced via SLM. Afterward, possibilities for a microstructural tailoring within the joining zone via the modification of process parameters are theoretically and practically discussed. Therefore, hybrid sample materials have been manufactured and interface areas are subjected to microstructural analysis and hardness tests. The feasibility of the introduced approach has been demonstrated by both fields of observation. The process combination illustrates a comprehensive way of transferring the high geometric freedom of powder-bed processing to the LMD process. The adjustment of process parameters between both techniques seems to be one promising way for an alignment on a microstructural and mechanical scale.
  •  
9.
  • Seidel, A., et al. (författare)
  • Surface modification of additively manufactured gamma titanium aluminide hardware
  • 2019
  • Ingår i: Journal of laser applications. - : Laser Institute of America. - 1042-346X .- 1938-1387. ; 31:2
  • Tidskriftsartikel (refereegranskat)abstract
    • A major part of additive manufacturing focuses on the fabrication of metallic parts in different fields of applications. Examples include components for jet engines and turbines and also implants in the medical sector. Titanium alloys represent a material group which is used cross-sectoral in a large number of applications. The present paper addresses the titanium aluminides in particular. These materials have a low density in combination with a comparatively high-temperature resistance [G. Sauthoff, Intermetallics (Wiley-VCH Verlag, Weinheim, Germany, 2008)]. Nevertheless, the laser material processing is rather challenging because of their distinct tendency to lamellar interface cracking. This requires tailored processing strategies and equipment [C. Leyens et al., in Ti-2015: The 13th World Conference on Titanium, Symposium 5. Intermetallics and MMCs, 16–20 August 2015, San Diego, CA (The Minerals, Metals & Materials Society, Pittsburgh, PA, 2016)]. This work focusses on tailored processing of titanium aluminides with focus on the process-dependent surface characteristics. This includes the as-built status for powder bed processing and direct laser metal deposition but also the surface modification via post and/or advanced machining. Finally, comprehensive characterization is performed using destructive as well as nondestructive testing methods. The latter includes 3D scanning, computed tomography, microscopic analysis, and, in particular, surface roughness measurements.
  •  
10.
  • Vandaele, Ann Carine, et al. (författare)
  • Martian dust storm impact on atmospheric H2O and D/H observed by ExoMars Trace Gas Orbiter
  • 2019
  • Ingår i: Nature. - : Springer. - 1476-4687 .- 1476-4687 .- 0028-0836. ; 568:7753, s. 521-525
  • Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
    • Global dust storms on Mars are rare1,2 but can affect the Martian atmosphere for several months. They can cause changes in atmospheric dynamics and inflation of the atmosphere3, primarily owing to solar heating of the dust3. In turn, changes in atmospheric dynamics can affect the distribution of atmospheric water vapour, with potential implications for the atmospheric photochemistry and climate on Mars4. Recent observations of the water vapour abundance in the Martian atmosphere during dust storm conditions revealed a high-altitude increase in atmospheric water vapour that was more pronounced at high northern latitudes5,6, as well as a decrease in the water column at low latitudes7,8. Here we present concurrent, high-resolution measurements of dust, water and semiheavy water (HDO) at the onset of a global dust storm, obtained by the NOMAD and ACS instruments onboard the ExoMars Trace Gas Orbiter. We report the vertical distribution of the HDO/H2O ratio (D/H) from the planetary boundary layer up to an altitude of 80 kilometres. Our findings suggest that before the onset of the dust storm, HDO abundances were reduced to levels below detectability at altitudes above 40 kilometres. This decrease in HDO coincided with the presence of water-ice clouds. During the storm, an increase in the abundance of H2O and HDO was observed at altitudes between 40 and 80 kilometres. We propose that these increased abundances may be the result of warmer temperatures during the dust storm causing stronger atmospheric circulation and preventing ice cloud formation, which may confine water vapour to lower altitudes through gravitational fall and subsequent sublimation of ice crystals3. The observed changes in H2O and HDO abundance occurred within a few days during the development of the dust storm, suggesting a fast impact of dust storms on the Martian atmosphere.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-10 av 25
Typ av publikation
tidskriftsartikel (19)
konferensbidrag (5)
forskningsöversikt (1)
Typ av innehåll
refereegranskat (20)
övrigt vetenskapligt/konstnärligt (5)
Författare/redaktör
Schneider, J. (4)
Lundqvist, Annamari (3)
Giwercman, Aleksande ... (3)
Wade, Alisha N. (3)
Cooper, Cyrus (3)
Hardy, Rebecca (3)
visa fler...
Brenner, Hermann (3)
Claessens, Frank (3)
Sjostrom, Michael (3)
Adams, Robert (3)
Thijs, Lutgarde (3)
Staessen, Jan A (3)
Björkelund, Cecilia, ... (3)
Farzadfar, Farshad (3)
Geleijnse, Johanna M ... (3)
Guessous, Idris (3)
Jonas, Jost B. (3)
Kasaeian, Amir (3)
Khader, Yousef Saleh (3)
Khang, Young-Ho (3)
Mohan, Viswanathan (3)
Nagel, Gabriele (3)
Qorbani, Mostafa (3)
Rivera, Juan A. (3)
Alkerwi, Ala'a (3)
Bjertness, Espen (3)
Kengne, Andre P. (3)
McGarvey, Stephen T. (3)
Shiri, Rahman (3)
Huybrechts, Inge (3)
Finn, Joseph D. (3)
Casanueva, Felipe F. (3)
Kula, Krzysztof (3)
Punab, Margus (3)
Vanderschueren, Dirk (3)
Nguyen, Nguyen D (3)
Thuesen, Betina H. (3)
Ikram, M. Arfan (3)
Lehtimäki, Terho (3)
Chetrit, Angela (3)
Anjana, Ranjit Mohan (3)
Pradeepa, Rajendra (3)
Dankner, Rachel (3)
Wang, Qian (3)
Rahman, Mahmudur (3)
Sundström, Johan (3)
Peters, Annette (3)
Gutierrez, Laura (3)
Söderberg, Stefan (3)
Lytsy, Per (3)
visa färre...
Lärosäte
Umeå universitet (2)
Göteborgs universitet (1)
Uppsala universitet (1)
Stockholms universitet (1)
Lunds universitet (1)
Språk
Engelska (25)
Forskningsämne (UKÄ/SCB)
Teknik (13)
Naturvetenskap (10)
Medicin och hälsovetenskap (3)
Samhällsvetenskap (1)

År

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy