SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Grip M) ;hsvcat:2"

Sökning: WFRF:(Grip M) > Teknik

  • Resultat 1-6 av 6
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  •  
2.
  •  
3.
  •  
4.
  • Grip, Carl-Erik, et al. (författare)
  • Forestry meets Steel. A system study of the possibility to produce DRI (directly Reduced Iron) using gasified biomass.
  • 2015
  • Ingår i: ECOS 2015 - 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. - : International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. - 9782955553909
  • Konferensbidrag (refereegranskat)abstract
    • The main production of primy Iron from ore is now made by reduction using fossil reductants, either by producing hot metal in the blast furnace process or as directly reduced iron with natural gas as most common reductant. The climate gas impact would be improved if at least pt of the reductants could be produced from Biomass. One possibility could be to use gasified Biomass to produce DRI (Directly Reduced Iron). This is studied in a cooperative project where LTU, MEFOS, ETC and five industries in the eas forestry & pulp, mining, iron and gas e involved. The investigation is made in four pts where the first one is on the supply of biomass. A lge amount of Biomass has to be delivered into a single site to exchange a lge amount of fossil reductant. Also, forestry by-products should be used as most of the round wood is reserved for other uses. Hvesting, logistics and economics e considered. The second pt is on the gasification of the biomass, where the aim is to use to produce hot gas that can be used directly. Pilot experiments e cried out using oxygen in an entrained flow gasifier. The third pt is on the metallurgical processes, where reduction tests e cried out with gas that can be produced in the gasifier. The limitations of the gas content e studied as well as the effect on DRI. Also the suitability of the DRI product is evaluated. The fourth pt of the project uses process integration to model the whole process chain. The results from the other project pts e used to build the system model. It is then used for technical economic optimization the whole system hvesting- Transport-gasifier-direct reduction-use of DRI. The first use of the system model has been to find the best supply road (hvesting, pretreatment and transport) for a chosen production case The simulations indicated that the supply of residuals is possible but will need material from a lge pt of the north Sweden wood ea, and that a relatively lge amount of gas recirculation is needed. The continuing work is focused on further development of the optimization tool and the use of it for more extensive studies of the trade-off between pameters of metallurgy, gasification and supply. The result can be important for evaluation of future industrial applications. It could also help in understanding the effect of governmental control instruments. The paper will mainly focus on the process integration study.
  •  
5.
  • Grip, Carl-Erik, et al. (författare)
  • Relining a BOF in 60 hours
  • 1998
  • Ingår i: Steel Times. - 0039-095X. ; 226:8, s. 282-283
  • Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
    • Discusses SSAB Tunnplat AB's development of a system for fast relining of converters in refractories. Requirements of the method; Technique for relining; Main features of the BOF plant; Example of a 60-hour schedule used during planning a reline.
  •  
6.
  • Liu, Hao, et al. (författare)
  • A thermodynamic study of hot syngas impurities in steel reheating furnaces : Corrosion and interaction with oxide scales
  • 2014
  • Ingår i: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 77, s. 352-361
  • Tidskriftsartikel (refereegranskat)abstract
    • Environmental concerns lead industries to implement gasified biomass (syngas) as a promising fuel in steel reheating furnaces. The impurities of syngas as well as a combination with iron oxide scale form complex mixtures with low melting points, and might cause corrosion on steel slabs. In this paper, the effects of syngas impurities are thermodynamically investigated, when scale formation on the steel slabs surface simultaneously takes place. A steel reheating furnace can be divided into preheating, heating, and soaking zones where the temperature of a steel slab changes respectively. Therefore, the thermodynamic calculation is performed at different temperatures to predict the fate of impurities. Then, the stable species are connected with respective zones in a reheating furnace. It is concluded that reactions due to alkali compounds, chloride, and particulate matter could take place on steel slabs. In the low temperature range, interaction of sodium chloride occured with pure iron prior to scale formation. Then, at high temperature the reactions of impurities are notable with iron oxides due to scale growing. Furthermore, the multicomponent reactions with syngas impurities showed that most of alkali contents evaporate at first stages, and only small amounts of them remain in slag at high temperature.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-6 av 6

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy