| 1. |
- Fenstermacher, M.E., et al.
(författare)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
Ingår i: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Tidskriftsartikel (refereegranskat)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
- Sun, Jie, 1977, et al.
(författare)
-
Electrochemical Bubbling Transfer of Graphene Using a Polymer Support with Encapsulated Air Gap as Permeation Stopping Layer
- 2016
-
Ingår i: Journal of Nanomaterials. - : Hindawi Limited. - 1687-4129 .- 1687-4110. ; 2016
-
Tidskriftsartikel (refereegranskat)abstract
- Electrochemical bubbling transfer of graphene is a technique with high industrial potential due to its scalability, time- and cost-effectiveness, and ecofriendliness. However, the graphene is often damaged due to the turbulence and the trapped bubbles formed by the direct H2O and H+ permeation through the supporting polymer. We invent a graphene mechanical support of polyethylene terephthalate foil/plastic frame/poly(methyl methacrylate) sandwich, with an encapsulated air gap as the permeation stopping layer. The graphene damage is drastically reduced, as confirmed by the morphology and structural and electrical characterization, ultimately improving the controllability/reproducibility of the bubbling transfer of graphene and other two-dimensional materials.
|
|
| 5. |
- Zhang, Z. W., et al.
(författare)
-
Boron effects on the ductility of a nano-cluster-strengthened ferritic steel
- 2011
-
Ingår i: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - : Elsevier BV. - 0921-5093. ; 528:3, s. 855-859
-
Tidskriftsartikel (refereegranskat)abstract
- The mechanical properties of Cu-rich nano-cluster-strengthened ferritic steels with and without boron doping were investigated. Tensile tests at room temperature in air showed that the B-doped ferritic steel has similar yield strength but a larger elongation than that without boron doping after extended aging at 500 degrees C. There are three mechanisms affecting the ductility and fracture of these steels: brittle cleavage fracture, week grain boundaries, and moisture-induced hydrogen embrittlement. Our study reveals that boron strengthens the grain boundary and suppresses the intergranular fracture. Furthermore, the moisture-induced embrittlement can be alleviated by surface coating with vacuum oil. (C) 2010 Elsevier B.V. All rights reserved.
|
|
| 6. |
- Hu, Q., et al.
(författare)
-
Effect of Mo on high-temperature strength of refractory complex concentrated alloys: A perspective of electronegativity difference
- 2022
-
Ingår i: Journal of Alloys and Compounds. - : Elsevier BV. - 0925-8388. ; 906
-
Tidskriftsartikel (refereegranskat)abstract
- Refractory complex concentrated alloys, RCCAs, show great potential for ultrahigh-temperature applications. High-temperature strength is one of the key requirements for RCCAs to qualify for that purpose. Some RCCAs already show superior high-temperature strength than that of commercial Ni-based superalloys, but many other RCCAs do not. It is thus important to identify the key factors that control the high-temperature strength of RCCAs. In this work, based on a statistic analysis of the yield strength at 1000 °C (σy1000) for 55 reported RCCAs, interestingly, it is revealed that Mo-containing RCCAs have in general a higher σy1000 than those RCCAs not containing Mo. The effect of Mo is attributed to its larger electronegativity and hence the larger electronegativity difference to other alloying elements, rather than to its higher melting point. The previously established proposal that a large electronegativity difference favoring the charge transfer and creating an atomic-level pressure that contributes to the strengthening of RCCAs at room temperature, seems effective even at a high temperature of 1000 °C. In addition, the large electronegativity difference also favors the room-temperature strength of single-bcc-phase RCCAs. The findings from this work, further verified experimentally in six new RCCAs, shed light on new research directions to develop RCCAs with decent strength at both high temperatures and room temperature, using a simple descriptor on the electronegativity difference.
|
|
| 7. |
- Xiong, R., et al.
(författare)
-
Key technologies for electric vehicles
- 2022
-
Ingår i: Green Energy and Intelligent Transportation. - : Elsevier B.V.. - 2773-1537. ; 1:2
-
Tidskriftsartikel (refereegranskat)
|
|
| 8. |
- Zhang, H., et al.
(författare)
-
Effect of High Configuration Entropy and Rare Earth Addition on Boride Precipitation and Mechanical Properties of Multi-principal-Element Alloys
- 2017
-
Ingår i: Journal of Materials Engineering and Performance. - : Springer Science and Business Media LLC. - 1059-9495 .- 1544-1024. ; 26:8, s. 3750-3755
-
Tidskriftsartikel (refereegranskat)abstract
- A series of multi-principal-element (MPE) alloys have been prepared by adding Ni, Mn, Al, Cu and Y into the reference CoCrFe-B alloy. The microstructure and mechanical properties of these MPE alloys have been investigated thoroughly. It is found that the addition of the elements can inhibit boride precipitation in the designed alloys and the solid solution strengthening effect induced by interstitial boron atoms is more significant than that by boride precipitation. The MPE alloys with the fcc phase as the main solid solution phase have a higher boron solubility and hence less boride precipitation, than those with the bcc phase as the main solid solution phase. The addition of yttrium can improve the boron solubility, decrease boride precipitation, control the boride morphology and, importantly, simultaneously improve the compressive strength and ductility of boron-containing MPE alloys.
|
|
| 9. |
- Devda, V., et al.
(författare)
-
Recovery of resources from industrial wastewater employing electrochemical technologies : status, advancements and perspectives
- 2021
-
Ingår i: Bioengineered. - : Taylor & Francis Group. - 2165-5979 .- 2165-5987. ; 12:1, s. 4697-4718
-
Tidskriftsartikel (refereegranskat)abstract
- In the last two decades, water use has increased at twice the rate of population growth. The freshwater resources are getting polluted by contaminants like heavy metals, pesticides, hydrocarbons, organic waste, pathogens, fertilizers, and emerging pollutants. Globally more than 80% of the wastewater is released into the environment without proper treatment. Rapid industrialization has a dramatic effect on developing countries leading to significant losses to economic and health well-being in terms of toxicological impacts on humans and the environment through air, water, and soil pollution. This article provides an overview of physical, chemical, and biological processes to remove wastewater contaminants. A physical and/or chemical technique alone appears ineffective for recovering useful resources from wastewater containing complex components. There is a requirement for more processes or processes combined with membrane and biological processes to enhance operational efficiency and quality. More processes or those that are combined with biological and membrane-based processes are required to enhance operational efficiencies and quality. This paper intends to provide an exhaustive review of electrochemical technologies including microbial electrochemical technologies. It provides comprehensive information for the recovery of metals, nutrients, sulfur, hydrogen, and heat from industrial effluents. This article aims to give detailed information into the advancements in electrochemical processes to energy use, improve restoration performance, and achieve commercialization. It also covers bottlenecks and perspectives of this research area.
|
|
| 10. |
- Koul, Y, et al.
(författare)
-
Microbial electrolysis : a promising approach for treatment and resource recovery from industrial wastewater
- 2022
-
Ingår i: Bioengineered. - : Informa UK Limited. - 2165-5979 .- 2165-5987. ; 13:4, s. 8115-8134
-
Tidskriftsartikel (refereegranskat)abstract
- Wastewater is one of the most common by-products of almost every industrial process. Treatment of wastewater alone, before disposal, necessitates an excess of energy. Environmental concerns over the use of fossil fuels as a source of energy have prompted a surge in demand for alternative energy sources and the development of sophisticated procedures to extract energy from unconventional sources. Treatment of municipal and industrial wastewater alone accounts for about 3% of global electricity use while the amount of energy embedded in the waste is at least 2-4 times greater than the energy required to treat the same effluent. The microbial electrolysis cell (MEC) is one of the most efficient technologies for waste-to-product conversion that uses electrochemically active bacteria to convert organic matter into hydrogen or a variety of by-products without polluting the environment. This paper highlights existing obstacles and future potential in the integration of Microbial Electrolysis Cell with other processes like anaerobic digestion coupled system, anaerobic membrane bioreactor and thermoelectric micro converter.
|
|
