| 1. |
|
|
| 2. |
- Fenstermacher, M.E., et al.
(author)
-
DIII-D research advancing the physics basis for optimizing the tokamak approach to fusion energy
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 62:4
-
Journal article (peer-reviewed)abstract
- DIII-D physics research addresses critical challenges for the operation of ITER and the next generation of fusion energy devices. This is done through a focus on innovations to provide solutions for high performance long pulse operation, coupled with fundamental plasma physics understanding and model validation, to drive scenario development by integrating high performance core and boundary plasmas. Substantial increases in off-axis current drive efficiency from an innovative top launch system for EC power, and in pressure broadening for Alfven eigenmode control from a co-/counter-I p steerable off-axis neutral beam, all improve the prospects for optimization of future long pulse/steady state high performance tokamak operation. Fundamental studies into the modes that drive the evolution of the pedestal pressure profile and electron vs ion heat flux validate predictive models of pedestal recovery after ELMs. Understanding the physics mechanisms of ELM control and density pumpout by 3D magnetic perturbation fields leads to confident predictions for ITER and future devices. Validated modeling of high-Z shattered pellet injection for disruption mitigation, runaway electron dissipation, and techniques for disruption prediction and avoidance including machine learning, give confidence in handling disruptivity for future devices. For the non-nuclear phase of ITER, two actuators are identified to lower the L-H threshold power in hydrogen plasmas. With this physics understanding and suite of capabilities, a high poloidal beta optimized-core scenario with an internal transport barrier that projects nearly to Q = 10 in ITER at ∼8 MA was coupled to a detached divertor, and a near super H-mode optimized-pedestal scenario with co-I p beam injection was coupled to a radiative divertor. The hybrid core scenario was achieved directly, without the need for anomalous current diffusion, using off-axis current drive actuators. Also, a controller to assess proximity to stability limits and regulate β N in the ITER baseline scenario, based on plasma response to probing 3D fields, was demonstrated. Finally, innovative tokamak operation using a negative triangularity shape showed many attractive features for future pilot plant operation.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Gilbert, M. R., et al.
(author)
-
Perspectives on multiscale modelling and experiments to accelerate materials development for fusion
- 2021
-
In: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 554
-
Research review (peer-reviewed)abstract
- Prediction of material performance in fusion reactor environments relies on computational modelling, and will continue to do so until the first generation of fusion power plants come on line and allow long-term behaviour to be observed. In the meantime, the modelling is supported by experiments that attempt to replicate some aspects of the eventual operational conditions. In 2019, a group of leading experts met under the umbrella of the IEA to discuss the current position and ongoing challenges in modelling of fusion materials and how advanced experimental characterisation is aiding model improvement. This review draws from the discussions held during that workshop. Topics covering modelling of irradiation-induced defect production and fundamental properties, gas behaviour, clustering and segregation, defect evolution and interactions are discussed, as well as new and novel multiscale simulation approaches, and the latest effort s to link modelling to experiments through advanced observation and characterisation techniques.
|
|
| 7. |
- Hu, J., et al.
(author)
-
Detection of clenbuterol hydrochloride residuals in pork liver using a customized surface plasmon resonance bioanalyzer
- 2015
-
In: PLOS ONE. - : Public Library of Science (PLoS). - 1932-6203. ; 10:3
-
Journal article (peer-reviewed)abstract
- A surface plasmon resonance (SPR) immunoassay with an immobilization of self-assembled molecular identification membrane for the detection of residual Clenbuterol Hydrochloride (CLB) in pork liver was systematically investigated and experimentally validated for its high performance. SPR immunoassay with a regular competitive inhibition assay cannot be directly verified to detect CLB residuals. In this study, the binding of Au film with mercaptopropionic acid was investigated using the known form of the strong S-Au covalent bonds formed by the chemical radical of the mercaptopropionic acid and the Au film. After that, the immunoglobulin IgG of swine (SwIgG-CLB) was bonded with the mercaptopropionic acid by covalent -CO-NH- amide bonding. The modified comprehensive analysis of how the membrane structure works was introduced together with the customized SPR bioanalyzer. In order to evaluate the performance of this biomembrane structure, the concentrations of CLBcontained solutions of 0 ng•mL-1, 10 ng•mL-1, 20 ng•mL-1, 33.3 ng•mL-1, and 40 ng•mL-1 were prepared by adding CLB reagents into the solutions of CLB antibody (Clenbuterol Hydrochloride Antibody, CLB-Ab), successively and then the response unit (RU) was measured individually. Using the data collected from the linear CCD array, the fitting curve was established with the R-Square value of 0.9929. Correspondingly, the recovery rate ranged from 88.48% to 103.21% was experimented and the limit of detection of CLB in 1.26 ng•mL-1 was obtained efficiently. It was concluded that the detection method associated with biomembrane properties is expected to contribute much to the determination of residual CLB in pork liver quantitatively by using the customized SPR bioanalyzer. © 2015 Hu et al.
|
|
| 8. |
- Li, J., et al.
(author)
-
Study of selective isotropic etching Si1−xGex in process of nanowire transistors
- 2020
-
In: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 31:1, s. 134-143
-
Journal article (peer-reviewed)abstract
- On approach towards the end of technology roadmap, a revolutionary approach towards the nanowire transistors is favorable due to the full control of carrier transport. The transistor design moves toward vertically or laterally stacked Gate-All-Around (GAA) where Si or SiGe can be used as channel material. This study presents a novel isotropic inductively coupled plasma (ICP) dry etching of Si1−xGex (0.10 ≤ x ≤ 0.28) in SiGe/Si multilayer structures (MLSs) with high selectivity to Si, SiO2, Si3N4 and SiON which can be applied in advanced 3D transistors and Micro-Electro-Mechanical System (MEMS) in future. The profile of SiGe etching for different thicknesses, compositions and locations in MLSs using dry or wet etch have been studied. A special care has been spent for layer quality of Si, strain relaxation of SiGe layers as well as residual contamination during the etching. In difference with dry etching methods (downstream remote plasma), the conventional ICP source in situ is used where CF4/O2/He gas mixture was used as the etching gas to obtain higher selectivity. Based on the reliability of ICP technique a range of etching rate 25–50 nm/min can be obtained for accurate isotropic etching of Si1−xGex, to form cavity in advanced 3D transistor processes in future.
|
|
| 9. |
- Xu, T., et al.
(author)
-
Hydrate salt/fumed silica shape-stabilized composite phase change material with adjustable phase change temperature for radiant floor heating system
- 2023
-
In: Journal of Building Engineering. - : Elsevier. - 2352-7102. ; 71
-
Journal article (peer-reviewed)abstract
- Radiant floor heating system combined with hydrate salt phase change materials (PCMs) can obtain energy savings along with improving thermal comfort. However, the inappropriate phase change temperature and the leakage of PCM limit its further applications. Here, sodium acetate trihydrate (SAT)-potassium chloride (KCl)-urea composite phase change material (CPCM) was composited with fumed silica (SiO2) to prepare shape-stabilized CPCM (SSCPCM) with adjustable phase change temperature for use in floor radiant heating. The effects of the mass fraction of SiO2 on phase change properties, and shape-stabilized ability of SSCPCM were emphatically studied. Besides, the morphology, porous structure analysis and chemical compatibility and related thermal properties of SSCPCM were discussed detailedly. The results manifested that SiO2 could not only regulate the melting temperature of SAT-KCl-urea CPCM, but also stabilize CPCM into its porous structure with large surface area and high porosity. Meanwhile, SSCPCM with 30 wt% SiO2 exhibited a good shape stability, and melted at 40.85 °C with high latent heat of 132.6 J/g, low supercooling degree of 0.29 °C as well as good thermal stability and thermal reliability. The result comparison of two test rooms confirmed that phase change floor radiant heating system can effectively increase the duration of indoor thermal comfort. All good thermal properties of SSCPCM make it prospective potential in radiant floor heating system for building energy efficiency. © 2023 Elsevier Ltd
|
|
| 10. |
- Pang, Xiaodan, Dr., et al.
(author)
-
Bridging the Terahertz Gap : Photonics-assisted Free-Space Communications from the Submillimeter-Wave to the Mid-Infrared
- 2022
-
In: Journal of Lightwave Technology. - : Institute of Electrical and Electronics Engineers Inc.. - 0733-8724 .- 1558-2213. ; 40:10, s. 3149-3162
-
Journal article (peer-reviewed)abstract
- Since about one and half centuries ago, at the dawn of modern communications, the radio and the optics have been two separate electromagnetic spectrum regions to carry data. Differentiated by their generation/detection methods and propagation properties, the two paths have evolved almost independently until today. The optical technologies dominate the long-distance and high-speed terrestrial wireline communications through fiber-optic telecom systems, whereas the radio technologies have mainly dominated the short- to medium-range wireless scenarios. Now, these two separate counterparts are both facing a sign of saturation in their respective roadmap horizons, particularly in the segment of free-space communications. The optical technologies are extending into the mid-wave and long-wave infrared (MWIR and LWIR) regimes to achieve better propagation performance through the dynamic atmospheric channels. Radio technologies strive for higher frequencies like the millimeter-wave (MMW) and sub-terahertz (sub-THz) to gain broader bandwidth. The boundary between the two is becoming blurred and intercrossed. During the past few years, we witnessed technological breakthroughs in free-space transmission supporting very high data rates, many achieved with the assistance of photonics. This paper focuses on such photonics-assisted free-space communication technologies in both the lower and upper sides of the THz gap and provides a detailed review of recent research and development activities on some of the key enabling technologies. Our recent experimental demonstrations of high-speed free-space transmissions in both frequency regions are also presented as examples to show the system requirements for device characteristics and digital signal processing (DSP) performance.
|
|
