| 1. |
- Birch, J., et al.
(författare)
-
Multi-Grid boron-10 detector for time-of-flight spectrometers in neutron scattering science
- 2015
-
Ingår i: 2015 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2015. - : Institute of Electrical and Electronics Engineers (IEEE). - 9781467398626
-
Konferensbidrag (refereegranskat)abstract
- The Multi-Grid (MG) detector has been introduced at ILL and developed by a collaboration between ILL, ESS and Linkoping University. This detector design addresses the severely decreased availability of He3, in particular for neutron scattering instruments with large-area detectors, such as time-of-flight neutron spectrometers at ESS and other facilities. The MG detector is based on thin converter films of boron-10 carbide arranged in layers orthogonal to the incoming neutrons. The design of the detector provides position resolution, efficiency competitive with He3 and a strong gamma rejection capability. This paper presents the MG large-area (2.4m2) demonstrator and the progress made in order to meet the needs of production of B4C-coated layers, mechanical parts and assembly on a scale similar to that of the final detectors for ESS. A particular effort was made to produce aluminium detector parts with a low alpha background, successfully reducing the background rate to acceptable levels. Following the IN5 demonstrator, a compact prototype has been designed in order to finalise the electronic readout to be used at the ESS instruments equipped with the MG.
|
|
| 2. |
- Engberg, David L. J., 1986-
(författare)
-
Atom Probe Tomography of Hard Nitride and Boride Thin Films
- 2019
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Hard ceramic thin films, including TiSiN, ZrAlN, ZrB2, and ZrTaB2, with applications for wear-resistant coatings, have been studied using atom probe tomography and correlated with several other analytical techniques, including X-ray diffraction, electron microscopy, and elastic recoil detection analysis. Outstanding obstacles for quantitative atom probe tomography of ceramic thin films have been surmounted.Mass spectral overlaps in TiSiN, which make 28Si indistinguishable from 14N, was resolved by isotopic substitution with 15N, and the nanostructural distribution of elements was thus revealed in 3-D, which enabled the identification of additional structural elements within the nanostructured Ti0.81Si0.1915N film. Improvements to the growth model of TiSiN by cathodic arc deposition was suggested.A self-organized nanolabyrinthine structure of ZrAlN, consisting of standing lamellae of fcc-ZrN and hexagonal AlN, was investigated with focus on the onset and limits of the self-organization. The local crystallographic orientational relationships were (001)ZrN || (0001)AlN and <110>ZrN || <2-1-10>AlN. Close to the MgO substrates, a smooth transition region was formed, going from segregated and disordered to the self-organized nanolabyrinthine structure. With increased growth temperature, coarse (111)-oriented ZrN grains occasionally precipitated and locally replaced the nanolabyrinthine structure. Significant local magnification effects rendered the Zr and N signals unusable, thereby inhibiting quantitative compositional analysis of the constituent phases, but the nanostructure was resolved using the Al signal.Ceramic materials are often affected by correlated evaporation, which can result in losses due to the detector dead-time/space. A compositional correction procedure was suggested, tested against an established procedure, and applied to ZrB2. The correction was found to be less dependent on the isotope abundances and background correction compared to the established procedure. While losses due to dead-time/space occur in atom probe tomography of all materials, the correlative field evaporation behavior of ceramics significantly increases the compositional error. The evaporation behavior of ZrB2 was therefore thoroughly investigated and evidence of preferential retention, correlated evaporation, and inhomogeneous field distributions at a low-index pole was presented. The high mass resolution, relatively low multiple events percentage, and quality of the co-evaporation correlation data was partly attributed to the crystal structure and film orientation, which promoted a layer-by-layer field evaporation.The evaporation behavior of the related ZrTaB2 films was found to be similar to that of ZrB2. The distribution of Ta in relation to Zr was investigated, showing that the column boundaries were both metal- and Ta-rich, and that there was a significant amount of Ta in solid solution within the columns.In addition, an instrumental artefact previously not described in atom probe tomography was found in several of the materials investigated in this thesis. The artefact consists of high-density lines along the analysis direction, which cannot be related to pole artefacts. The detection system of the atom probe was identified as the cause, because the artefact patterns on detector histograms coincided with the structure of the microchannel plate. Inconsistencies in the internal boundaries of the microchannel plate multifibers from the manufacturing process can influence the signal to the detector and locally increase the detection efficiency in a pattern characteristic to the microchannel plate in question.Altogether, this thesis shows that atom probe tomography of nitride and boride thin films is burdened by several artefacts and distortions, but that relevant material outcomes can nevertheless be achieved by informed choices of film isotopic constituents and analytical parameters, exclusion of heavily distorted regions (such as pole artefacts), and the use of compositional correction procedures when applicable.
|
|
| 3. |
- Pfeiffer, D., et al.
(författare)
-
First measurements with new high-resolution gadolinium-GEM neutron detectors
- 2016
-
Ingår i: Journal of Instrumentation. - : IOP PUBLISHING LTD. - 1748-0221. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- European Spallation Source instruments like the macromolecular diffractometer (NMX) require an excellent neutron detection efficiency, high-rate capabilities, time resolution, and an unprecedented spatial resolution in the order of a few hundred micrometers over a wide angular range of the incoming neutrons. For these instruments solid converters in combination with Micro Pattern Gaseous Detectors (MPGDs) are a promising option. A GEM detector with gadolinium converter was tested on a cold neutron beam at the IFE research reactor in Norway. The mu TPC analysis, proven to improve the spatial resolution in the case of B-10 converters, is extended to gadolinium based detectors. For the first time, a Gd-GEM was successfully operated to detect neutrons with a measured efficiency of 11.8% at a wavelength of 2 angstrom and a position resolution better than 250 mu m.
|
|
| 4. |
|
|
| 5. |
- Gunnarsson Sarius, Niklas, et al.
(författare)
-
Electrochemically based low-cost high precision processing in MOEMS packaging
- 2009
-
Ingår i: Electrochimica Acta. - : Elsevier BV. - 0013-4686 .- 1873-3859. ; 54:9, s. 2458-2465
-
Tidskriftsartikel (refereegranskat)abstract
- Precision processing in MOEMS (micro-opto-electromechanical systems) packaging has been studied based on electrochemical processes with the purpose of establishing technology for low-cost multifunctional encapsulation of microsystems and assembly of opto-electric access links in polymer. The electrochemically based processes studied in this paper include: 1. Electroforming of a polymer moulding tool (stamper) in a nickel sulphamate electrolyte on a highprecision 3D etched silicon template. 2. Patterning of 3D surfaces by an electrophoretic photoresist. 3. Precision plating of Au and Sn for self-alignment of chips by eutectic Au-Sn solder. The results show that nickel stampers with adequately low internal stress can be electroformed on 3D silicon wafers. Furthermore, 3D polymer samples manufactured by the nickel stampers can be patterned with metal lines down to 20 mu m width using electrophoretic photoresist. Finally, eutectic Au-Sn solder bumps are realized by electroplating of Au and Sn followed by reflowing, satisfying the demands on dimension and alloy composition control over a 4 in. Si wafer.
|
|
| 6. |
- Landälv, Ludvig, 1982-, et al.
(författare)
-
Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings
- 2019
-
Ingår i: Thin Solid Films. - : Elsevier BV. - 0040-6090 .- 1879-2731. ; 688
-
Tidskriftsartikel (refereegranskat)abstract
- Coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited by pulsed DC reactive sputter deposition on Si(100) at a temperature of 550 °C. XRD showed three different crystal structures depending on V-metal fraction in the coating: α-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, 63–42 at.% V. At lower V-content, 18 and 7 at.%, a gamma-alumina-like solid solution was observed, shifted to larger d-spacing compared to pure γ-Al2O3. The microstructure changes from large columnar faceted grains for α-V2O3 to smaller equiaxed grains when lowering the vanadium content towards pure γ-Al2O3. Annealing in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 °C for 42 at.% V and 700 °C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure γ-Al2O3-coating, which transformed to α-Al2O3 after annealing to 1100 °C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The latter decreased with increasing V-content, larger than 7 at.% V metal fraction. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings.
|
|
| 7. |
- Mostaghel, Rana, 1981-, et al.
(författare)
-
Marketing and supply chain coordination and intelligence quality : A product innovation performance perspective
- 2019
-
Ingår i: Journal of Business Research. - : Elsevier. - 0148-2963 .- 1873-7978. ; 101, s. 597-606
-
Tidskriftsartikel (refereegranskat)abstract
- Based on a sample of 148 Swedish firms, this study investigates the complementary relationships between internal and external coordination and external intelligence quality to explain product innovation performance. The results show that, with increasing manufacturing-marketing coordination, higher market intelligence quality or higher supply chain intelligence quality are positively associated with product innovation performance. The complementary roles of internal and external coordination and intelligence quality have theoretical and practical implications.
|
|
| 8. |
- Spencer, C B, et al.
(författare)
-
Phase Evaluation in Al(2)O(3) Fiber-Reinforced Ti(2)AlC During Sintering in the 1300 degrees C-1500 degrees C Temperature Range
- 2011
-
Ingår i: Journal of The American Ceramic Society. - : Wiley-Blackwell. - 0002-7820 .- 1551-2916. ; 94:10, s. 3327-3334
-
Tidskriftsartikel (refereegranskat)abstract
- In this article, the reactivity of Ti(2)AlC powders, with 3 and 10 mu m alumina, Al(2)O(3), fibers during pressure-assisted sintering is explored. Samples were fabricated by hot-isostatic-pressing (HIPed) or hot-pressing (HPed), and characterized by X-ray diffraction, differential thermal analysis, and electron microscopy-both scanning and transmission-equipped with energy dispersive X-ray spectroscopes. Samples prepared at 1300 degrees C were fully dense, with no apparent reaction between fiber and matrix. In samples HPed to 1500 degrees C, even pure Ti(2)AlC powders dissociated to Ti(3)AlC(2) according to: 2 Ti(2)AlC = Ti(3)AlC(2) + TiAl(x) (l) + (1-x) Al (l/v), with x andlt; 1. More severe Al loss results in the formation of TiC(y). The presence of the Al(2)O(3) fibers delayed densification enough to allow most of the Al and some of the Ti to escape into the vacuum of the hot press or react with the encapsulating glass during HIPing a resulting in a more intensive dissociation of the Ti(2)AlC. Although, in principle Ti(2)AlC can be reinforced with Al(2)O(3) fibers, the processing/use temperature will have to be kept below 1500 degrees C, as, at that temperature the fibers, used here, sinter together.
|
|
