| 1. |
- Humar, Miha, et al.
(författare)
-
Introduction of the COST FP 1303 Cooperative Performance Test
- 2015
-
Ingår i: Proceedings of the 46th IRG Annual Meeting.
-
Konferensbidrag (refereegranskat)abstract
- COST Action FP 1303 “Performance of bio-based building materials” successfully started in October 2013 and an ambitious program was set up for the four year programme. COST Actions provide an excellent opportunity for collaborative research, e.g. in the frame of Round Robin tests.The idea of this respective test was to distribute a fairly simple test set up to as many places in Europe as possible in order to collect performance data reflecting the range of climatic exposure conditions. Furthermore we wanted to consider performance in its manifold meaning, i.e. optical, aesthetical, moisture and functional performance and durability. In contrast to traditional Round Robin tests aiming on comparative evaluation and validation of results from different test laboratories, this initiative aims on collecting performance data under climatically different exposure conditions. Therefore it was required to provide weather data from the respective test sites to allow establishing relationships between climate conditions and the following measured, which shall be evaluated regularly: decay, discolouration, development of mould and other staining fungi, corrosion, formation of cracks and moisture performance (if data logging device is included). Further details about the test and the first outcomes are presented in this paper.
|
|
| 2. |
- Jones, C. A., et al.
(författare)
-
A verification of thermophysical properties of a porous ceramic investment casting mould using commercial computational fluid dynamics software
- 2020
-
Ingår i: IOP Conference Series. - : Institute of Physics Publishing.
-
Konferensbidrag (refereegranskat)abstract
- Defects in cast metals remain a common problem in many areas of the foundry industry, particularly in the investment casting of large area, thin-walled components for aerospace applications. During previous research, the thermophysical properties, density and porosity of a fibre reinforced ceramic investment casting mould were determined using several experimental techniques. Without verification, these experimental results remain nothing more than educated guesswork. The purpose of this study is to verify previous results and to more fully characterise the ceramic mould material with complementary measurements. A commercially available computational fluid dynamic (CFD) simulation package, Flow-3D®, was used in conjunction with a full-scale Ni-superalloy (IN718) casting to assess the accuracy of these results. By placing thermocouples strategically across the mould thickness, temperature profiles were determined and compared directly to predicted profiles extracted from the simulation by a custom-written Python script.
|
|
| 3. |
- Ormondroyd, G. A., et al.
(författare)
-
Water sorption, surface structure and surface energy characteristics of wood composite fibres refined at different pressures
- 2016
-
Ingår i: Wood Material Science & Engineering. - : Taylor & Francis. - 1748-0272 .- 1748-0280. ; , s. 1-8
-
Tidskriftsartikel (refereegranskat)abstract
- During fibre processing, wood fibres are subjected to a range of physical and chemical conditions sufficient to slightly alter their chemical composition and hence their ultimate performance when used in the manufacture of wood fibre-based composites. In order to better understand the effects of refiner conditions on material performance, wood fibres were subjected to processing at different refiner pressures (4, 6, 8 and 10 bar) and subsequently dried in a flash drier. The fibres were analysed for changes in surface area, surface energy, surface structure and water vapour sorption characteristics. The methods applied were nitrogen adsorption utilising the Brunauer–Emmett–Teller theory, inverse gas chromatography, scanning electron microscopy and dynamic vapour sorption. It was found that increasing refiner pressure resulted in fibres of lower surface area, accompanied by increasing dispersive surface energies up to operating refiner pressures of 8 bar. It was found with fibres refined at different pressures that as the refiner pressure increased the equilibrium moisture content of the fibre decreased at the set relative humidities. However, it was also noted that the hysteresis was not significantly different between each of the refiner pressures. The results suggest that different refiner pressures can be used to tune the surface characteristics which may be beneficial to product development and the improvement of the environmental profile of the wood fibre composites.
|
|
