| 1. |
- Kerekes, Nóra, et al.
(författare)
-
Conduct disorder and somatic health in children: a nationwide genetically sensitive study
- 2020
-
Ingår i: BMC Psychiatry. - : Springer Science and Business Media LLC. - 1471-244X. ; 20:1
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Conduct disorder (CD), a serious behavioral and emotional disorder in childhood and adolescence, characterized by disruptive behavior and breaking societal rules. Studies have explored the overlap of CD with neurodevelopmental problems (NDP). The somatic health of children with NDP has been investigated; however, the prevalence of these problems in children with CD has not been sufficiently studied. Holistic assessment of children with CD is required for establishing effective treatment strategies. Aims: (1) Define the prevalence of selected neurological problems (migraine and epilepsy) and gastrointestinal problems (celiac disease, lactose intolerance, diarrhea, and constipation) in a population of twins aged 9 or 12; (2) Compare the prevalence of somatic problems in three subpopulations: (a) children without CD or NDP, (b) children with CD, and (c) children with both CD and NDP; (3) Select twin pairs where at least one child screened positive for CD but not NDP (proband) and map both children’s neurological and gastrointestinal problems. Method: Telephone interviews with parents of 20,302 twins in a cross-sectional, nationwide, ongoing study. According to their scores on the Autism-Tics, AD/HD, and Comorbidities inventory, screen-positive children were selected and divided into two groups: (1) children with CD Only, (2) children with CD and at least one NDP. Results: Children with CD had an increased prevalence of each neurological and gastrointestinal problem (except celiac disease), and the prevalence of somatic problems was further increased among children with comorbid CD and NDP. The presence of CD (without NDP) increased the odds of constipation for girls and the odds of epilepsy for boys. Girls with CD generally had more coexisting gastrointestinal problems than boys with CD. Female co-twins of probands with CD were strongly affected by gastrointestinal problems. Concordance analyses suggested genetic background factors in neurological and gastrointestinal problems, but no common etiology with CD could be concluded. Conclusion: Co-occurring NDP could explain most of the increased prevalence of somatic problems in CD. Our results raise a new perspective on CD in children and adolescents; their CD seems to be linked to a number of other health problems, ranging from neurodevelopmental and psychiatric disorders to somatic complaints. © 2020, The Author(s).
|
|
| 2. |
- Lyphout, Christophe, 1981-, et al.
(författare)
-
Screening Design of Supersonic Air Fuel Processing for Hard Metal Coatings
- 2014
-
Ingår i: Journal of thermal spray technology (Print). - : Springer Science and Business Media LLC. - 1059-9630 .- 1544-1016. ; 23:8, s. 1323-1332
-
Tidskriftsartikel (refereegranskat)abstract
- Replacement of electrolytic hard chromium method by thermal spray technology has shown a growing interest in the past decades, mainly pioneered by depositing WC-based material by conventional HVOF processes. Lower thermal energy and higher kinetic energy of sprayed particles achieved by newly developed Supersonic Air Fuel system, so-called HVAF-M3, significantly reduces decarburization, and increases wear and corrosion resistance properties, making HVAF-sprayed coatings attractive both economically and environmentally. In the present work, full factorial designs of experiments have been extensively utilized to establish relationships between hardware configurations, process and engineering variables, and coatings properties. The relevance of those process factors is emphasized and their significance is discussed in the optimization of coatings for improved abrasion wear and corrosion performances. © 2014 ASM International.
|
|
| 3. |
|
|
| 4. |
- Svensson, Lars-Erik, 1951-, et al.
(författare)
-
Strength and Impact Toughness of High Strength Steel Weld Metals : Influence of Welding Method, Dilution and Cooling Rate
- 2015
-
Ingår i: Proceedings of IIW International Conference, High-Strength Materials. - Helsingfors. ; , s. 1-9
-
Konferensbidrag (refereegranskat)abstract
- Producing welds with properties matching those of the steel is a challenge at high strength levels. The present study has investigated how the choice of welding method affects weld metal mechanical properties through effects on dilution and cooling rate. Butt welds were produced in 12 mm plates in 777 MPa and 1193 MPa yield strength steels. Conventional arc welding methods including manual metal arc, gas metal arc welding, rapid arc welding and submerged arc welding were used as well as laser-gas metal arc hybrid welding. Filler materials with nominal yield strengths between 810 and 1000 MPa were used. Cooling times between 800 C and 500 C were varied between 5s and 15s and measured by insertion of thermocouples into the weld pool.High quality welds were produced efficiently with all welding methods even though dilution varied between 3%, for manual metal arc welding, to 73% for laser-hybrid welding. Low dilution, rapid cooling and single pass welding contributed to higher strength. Overmatching weld metal strength was achieved for the less strong steel and weld yield strengths of >1000 MPa were recorded for the stronger steel. Fracture in transverse tensile testing was always located in base material or HAZ. Impact toughness was higher for lower strength and low dilution. Results are discussed relating choice of welding method and cooling rate to weld metal properties for different steel strength levels.
|
|
| 5. |
- Valiente Bermejo, María Asunción, 1972-, et al.
(författare)
-
Effect of shielding gas on welding performance and properties of duplex and superduplex stainless steel welds
- 2015
-
Ingår i: Welding in the World. - : Springer Science and Business Media LLC. - 0043-2288 .- 1878-6669. ; 59:2, s. 239-249
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of shielding gases on welding performanceand on properties of duplex and superduplex stainlesssteel welds was studied. Using argon as the reference gas,helium, nitrogen and carbon dioxide were added and fivemixtures evaluated. Bead-on-plate welds and circumferentialpipe welds were produced using mechanisedGMAwelding inthe downhand position. Welding performance, corrosion resistance,mechanical properties, microstructural features andweld imperfections were assessed and related to the shieldinggas. Shielding gases containing 30 % helium showed excellentresults; whilst pure argon showed unstable arc and poorweld pool fluidity and Ar+2 %CO2 resulted in underfill andporosity. Mixtures containing helium resulted in higher ductilitywelds and higher impact toughness values than weldsproduced with Ar+2 %CO2. Sound and balanced duplexmicrostructures free from intermetallics were found with suitableferrite contents for all the shielding gases studied. All theduplex pipe welds passed the corrosion test regardless of theshielding gas used, and the best results in the corrosion test forsuperduplex pipe welds were found when using Ar+30 %He+0.5 %CO2+1.8 %N2 as shielding gas.
|
|
| 6. |
- Valiente Bermejo, María Asunción, 1972-, et al.
(författare)
-
Influenza del gas di protezione sul comportamento e le proprietà di giunti sa dati di acciai duplex e superduplex : Effect of shielding gas on welding performance and properties of duplex and superduplex stainless steel welds
- 2016
-
Ingår i: Rivista Italiana della Saldatura. - : Istituto Italiano della Saldatura. - 0035-6794. ; 68:5, s. 635-650
-
Tidskriftsartikel (övrigt vetenskapligt/konstnärligt)abstract
- The influence of shielding gases on welding performance and on properties of duplex and superduplex stainless steel welds was studied. Using argon as the reference gas, helium, nitrogen and carbon dioxide were added and five mixtures evaluated. Bead-on-plate welds and circumferential pipe welds were produced using mechanised GMA welding in the downhand position. Welding performance, corrosion resistance, mechanical properties, microstructural features and weld imperfections were assessed and related to the shielding gas. Shielding gases containing 30% helium showed excellent results; whilst pure argon showed unstable arc and poor weld pool fluidity and Ar + 2% CO2resulted in underfill and porosity. Mixtures containing helium resulted in higher ductility welds and higher impact toughness values than welds produced with Ar + 2% CO2. Sound and balanced duplex microstructures free from intermetallics were found with suitable ferrite contents for all the shielding gases studied. All the duplex pipe welds passed the corrosion test regardless of the shielding gas used, and the best results in the corrosion test for superduplex pipe welds were found when using Ar + 30%He + 0.5% CO2+ 1.8% N2as shielding gas.
|
|
