| 1. |
- Jain, Prakhar, et al.
(författare)
-
Comparative study of knee joint torque estimations for linear and rotary actuators using bond graph approach for stand–sit–stand motions
- 2020
-
Ingår i: International Journal of Advanced Robotic Systems. - London : Sage Publications. - 1729-8806 .- 1729-8814. ; 17:5, s. 1-13
-
Tidskriftsartikel (refereegranskat)abstract
- Stand–sit–stand (STS) motions are the most frequently performed activities of everyday life and require extensive movement of knee joint. People suffering from knee joint disorders face difficulties in performing this motion. The compact knee exoskeleton (KE) has proven to be a viable, less complex, and cheaper alternative to the available entire lower-, upper-, and full-body exoskeletons. With growing number of technical glitches and finite battery life problems, there exist risks of sudden failure of the actuator of KE that could be detrimental for the vulnerable users. To overcome this problem, there is a need to accommodate a backup actuator in KE which can continue providing assistance during movement if the primary actuator ceases to function. This article provides a performance comparison of a four-bar mechanism-driven KE that can accommodate both the linear and the rotary actuators. The modelling and simulation of the system are performed using the bond graph (BG) technique. The results successfully showed that both actuators offered desired ranges of motions needed for STS motion. Furthermore, the knee joint torques developed by the linear and rotary actuators were found to be 40 Nm and 57 Nm, respectively, which corresponds to 60% and 85% of the total torque required by the knee joint to perform STS motions, thereby reducing the user effort to 40% and 15%, respectively. Thus, both actuators are self-capable to provide necessary assistance at the knee joint even if the primary actuator ceases to work due to a sudden fault, the secondary actuator will provide the required rotation of the thigh link and will continue to deliver the assistive torque. The article also effectively shows the application of BG approach to model the multidisciplinary systems like KE as it conveniently models the system containing various elements in different energy domains.
|
|
| 2. |
- Jain, Prakhar, et al.
(författare)
-
Linear actuator–based knee exoskeleton for stand–sit–stand motions: a bond graph approach
- 2022
-
Ingår i: Simulation (San Diego, Calif.). - : Sage. - 0037-5497 .- 1741-3133. ; 98:8, s. 627-644
-
Tidskriftsartikel (refereegranskat)abstract
- People with knee disorders often find it difficult to perform common mobility tasks, such as stand–sit–stand motions. High knee torque is required to complete such transitions, as the chances of toppling increase during these motions. Most of the existing conventional approaches, such as wheelchairs and crutches, have failed to provide complete independence to the users. Conversely, contemporary systems like lower body exoskeletons which are bulky, complex, and expensive do not specifically target the knee joint instead of assisting other joints. Hence, there is a need to aid the knee joint using a robotic knee exoskeleton capable of accurately providing the desired knee torque. In the present work, to assist the user in performing the stand–sit–stand motions, an electromyography sensor-based four-bar knee exoskeleton actuated by a linear actuator is proposed. The modeling of the complete exoskeleton is developed using bond graph technique, as the components exist in different energy domains and it is possible to frame a dynamic bond graph model using only kinematic equations. The prototype is fabricated, and experiments are carried out on an artificial limb to prove the efficacy of the design of the current knee exoskeleton. The assistive torque developed by the actuator at the knee joint of the exoskeleton is found to be suitable to assist the wearer. As a result, little effort is required by the wearer for performing the stand–sit–stand motions. The rotation of the thigh link of the developed exoskeleton was found to be suitable for performing the stand–sit–stand activity.
|
|
