| 1. |
- Murari, A., et al.
(författare)
-
A control oriented strategy of disruption prediction to avoid the configuration collapse of tokamak reactors
- 2024
-
Ingår i: Nature Communications. - 2041-1723 .- 2041-1723. ; 15:1
-
Tidskriftsartikel (refereegranskat)abstract
- The objective of thermonuclear fusion consists of producing electricity from the coalescence of light nuclei in high temperature plasmas. The most promising route to fusion envisages the confinement of such plasmas with magnetic fields, whose most studied configuration is the tokamak. Disruptions are catastrophic collapses affecting all tokamak devices and one of the main potential showstoppers on the route to a commercial reactor. In this work we report how, deploying innovative analysis methods on thousands of JET experiments covering the isotopic compositions from hydrogen to full tritium and including the major D-T campaign, the nature of the various forms of collapse is investigated in all phases of the discharges. An original approach to proximity detection has been developed, which allows determining both the probability of and the time interval remaining before an incoming disruption, with adaptive, from scratch, real time compatible techniques. The results indicate that physics based prediction and control tools can be developed, to deploy realistic strategies of disruption avoidance and prevention, meeting the requirements of the next generation of devices.
|
|
| 2. |
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Lee, S. E., et al.
(författare)
-
Global distribution of tritium in JET with the ITER-like wall
- 2021
-
Ingår i: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 26
-
Tidskriftsartikel (refereegranskat)abstract
- Nondestructive analysis of tritium (T) distribution was performed by means of imaging plate technique on specimens cut from the Be limiters, W-coated carbon tiles and bulk W lamellae retrieved from the JET tokamak after the first and third experimental campaigns with the ITER-like wall. Afterwards, analyses were continued using X-ray photoelectron spectroscopy, microscopy techniques and thermal desorption spectroscopy. Co-deposits formed on the W-coated tiles in the 1st campaign showed large T retention because of high carbon content reaching up to 50 atomic %, while the carbon fraction in co-deposits after the 3rd campaign was distinctly lower. The T retention of the plasma-facing surface of the bulk W tile was smaller than that of the W-coated tiles by a factor of 20, while deposition of small amount of T was found at the side surfaces facing to the gaps in a lamella structure. The correlation of T distributions with surface morphology and the discharge conditions is discussed.
|
|
| 6. |
- Lee, S. E., et al.
(författare)
-
Tritium distribution analysis of Be limiter tiles from JET-ITER like wall campaigns using imaging plate technique and β-ray induced X-ray spectrometry
- 2020
-
Ingår i: Fusion engineering and design. - : Elsevier BV. - 0920-3796 .- 1873-7196. ; 160
-
Tidskriftsartikel (refereegranskat)abstract
- Tritium (T) distribution on the plasma-facing surfaces (PFSs) and inside castellation of Be limiter tiles from the JET tokamak with the ITER-like wall (ILW) was analyzed using imaging plate (IP) technique and β-ray induced X-ray spectrometry (BIXS). Regarding to PFSs, the outer poloidal limiter (OPL) showed significantly higher T concentrations than the inner wall guard limiter (IWGL) and upper dump plate (DP). The concentration of T on OPL was high at the central part. However, deuterium (D) and metallic impurities showed maximum concentration at the edges. This difference in distributions indicated different deposition and retention mechanisms between T and D. In contrast, deposition profiles of T concentrations on the castellated surfaces extended up to ∼ 5 mm into the gap, i.e. were similar to those of D and metallic impurities found by ion beam analysis.
|
|
| 7. |
- Lee, S., et al.
(författare)
-
Tritium distributions in castellated structures of Be limiter tiles from JET-ITER-like wall experiments
- 2023
-
Ingår i: Nuclear Fusion. - : IOP Publishing Ltd. - 0029-5515 .- 1741-4326. ; 63:4
-
Tidskriftsartikel (refereegranskat)abstract
- Tritium retention in the castellated structure of beryllium limiters used in JET with the ITER-like wall (ILW) during the first (ILW1), third (ILW3) and all three (ILW1-3) campaigns were examined and evaluated. Tritium was deposited on the surfaces inside the castellation grooves together with deuterium, beryllium, oxygen, carbon and small amounts of metallic impurities such as nickel, copper and tungsten. The tritium content after the ILW1 campaign was greater than after the ILW3 campaign. This is attributed to the steadily decreasing amount of carbon impurities in JET from campaign to campaign. The majority of tritium was retained in shallow regions in the grooves, up to 2 mm from the entrance to the gap. It was comparable on all sides of the castellation, i.e. no difference has been detected between the toroidal and poloidal gaps. Secondly, the tritium retention in the gaps was similar on all specimens independent of their position in the tokamak, while the retention on the plasma-facing surfaces clearly depended on the tile position. The tritium deposition patterns in the castellation were also compared with the deuterium distribution determined in earlier studies.
|
|
| 8. |
- Masuzakil, S., et al.
(författare)
-
Analyses of microstructure, composition and retention of hydrogen isotopes in divertor tiles of JET with the ITER-like wall
- 2017
-
Ingår i: Physica Scripta. - : IOP PUBLISHING LTD. - 0031-8949 .- 1402-4896. ; T170
-
Tidskriftsartikel (refereegranskat)abstract
- Results of the comprehensive surface analyses of divertor tiles and dusts retrieved from JET after the first ITER-like wall campaign (2011-2012) are presented. The samples cored from the divertor tiles were analyzed. Numerous nano-size bubble-like structures were observed in the deposition layer on the apron of the inner divertor tile, and a beryllium dust with the same structures were found in the matter collected from the inner divertor after the campaign. This suggests that the nano-size bubble-like structures can make the deposition layer to become brittle and may lead to cracking followed by dust generation. X-ray photoelectron spectroscopy analyses of chemical states of species in the deposition layers identified the formation of beryllium-tungsten intermetallic compounds on an inner vertical tile. Different tritium retention profiles along the divertor tiles were observed at the top surfaces and at deeper regions of the tiles by using the imaging plate technique.
|
|
| 9. |
- Otsuka, T., et al.
(författare)
-
Tritium retention characteristics in dust particles in JET with ITER-like wall
- 2018
-
Ingår i: Nuclear Materials and Energy. - : ELSEVIER SCIENCE BV. - 2352-1791. ; 17, s. 279-283
-
Tidskriftsartikel (refereegranskat)abstract
- A tritium imaging plate technique (TIPT) in combination with an electron-probe microscopic analysis (EPMA) were applied to examine tritium (T) retention characteristics in individual dust particles collected in the Joint European Torus with the ITER-like Wall (JET-ILW) after the first campaign in 2011-2012. A lot of carbon pre-existing carbon deposits in the JET-C or released carbon particles from the remaining carbon-fiber components in the JET-ILW. Most of T was retained at the surface of and/or in the C-dominated dust particles. The retention in tungsten, beryllium and other metal-dominated dust particles is relatively lower by a factor of 10-100 in comparison with that in the Cdominated particles.
|
|
| 10. |
- Rubel, Marek, et al.
(författare)
-
Dust generation in tokamaks : Overview of beryllium and tungsten dust characterisation in JET with the ITER-like wall
- 2018
-
Ingår i: Fusion engineering and design. - : Elsevier. - 0920-3796 .- 1873-7196. ; 136, s. 579-586
-
Tidskriftsartikel (refereegranskat)abstract
- Operation of the JET tokamak with beryllium and tungsten ITER-like wall provides unique opportunity for detailed studies on dust generation: quantity, morphology, location, etc. The programme carried out in response to ITER needs for safety assessment comprises: (i) remotely controlled vacuum cleaning of the divertor; (ii) local sampling of loosely bound matter from plasma-facing components (PFC); (iii) collection of mobilized dust on various erosion-deposition probes located in the divertor and in the main chamber. Results of comprehensive analyses performed by a number of complementary techniques, e.g. a range of microscopy methods, electron and ion spectroscopy, liquid scintillography and thermal desorption, are summarized by following points: (a) Total amount of dust collected by vacuum cleaning after three campaigns is about 1-1.4 g per campaign (19.1-23.5 h plasma operation), i.e. over 100 times smaller than in JET operated with carbon walls (i.e. in JET-C). (b) Two major categories of Be dust are identified: flakes of co-deposits formed on PFC and droplets (2-10 mu m in diameter). Small quantifies, below 1 g, of Be droplets and splashes are associated mainly with melting of beryllium limiters.
|
|
