| 1. |
- Sumaila, U. Rashid, et al.
(author)
-
WTO must ban harmful fisheries subsidies
- 2021
-
In: Science. - : American Association for the Advancement of Science (AAAS). - 0036-8075 .- 1095-9203. ; 374:6567, s. 544-544
-
Journal article (other academic/artistic)
|
|
| 2. |
- Karnaouri, Anthi C, et al.
(author)
-
Chemoenzymatic Fractionation and Characterization of Pretreated Birch Outer Bark
- 2016
-
In: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:10, s. 5289-5302
-
Journal article (peer-reviewed)abstract
- In this study, the application of different chemical and enzymatic treatment methods for the fractionation of the birch outer bark components was evaluated. More specifically, untreated and steam exploded, hydrothermally and organosolv treated bark samples were incubated with enzyme mixtures that consisted of cellulases, hemicellulases and esterases, and the effect of enzymes was analyzed with 31P NMR and {13C-1H} HSQC. The biocatalysts performed the cleavage of ester bonds resulting in reduction of methoxy and aliphatic groups in the remaining solid fraction, whereas the aromatic fraction remained intact. Moreover, the suberin and lignin fraction were isolated chemically and their properties were characterized by gas chromatography (GC-MS), 31P NMR, {13C-1H} HSQC and gel permeation chromatography (GPC). It was demonstrated that the lignin fraction was enriched in guaiacyl phenolics but still contained some associated aliphatic acids and carbohydrates, whereas the suberin fraction presented a polymodal pattern of structures with different molecular weight distributions. This work will help in getting a deeper fundamental knowledge of the bark structure, the intermolecular connection between lignin and suberin fractions, as well as the potential use of enzymes in order to degrade the recalcitrant bark structure toward its valorization.
|
|
| 3. |
- Lange, Jonathan, et al.
(author)
-
Novel lithographic printing techniques enabling sustainable and high quality multi material manufacturing process for future space outposts
- 2021
-
In: IAC 2021 Congress Proceedings, 72nd International Astronautical Congress (IAC), Dubai, United Arab Emirates. - : International Astronautical Federation (IAF).
-
Conference paper (peer-reviewed)abstract
- Several challenges remain before the full potential of on-orbit manufacturing can be realized. There may be some limitations to the types of items that can be manufactured in space. Such limitations could be caused by a variety of factors, including the materials required for a particular structure, the size of the object to be manufactured, the time required to execute the architecture, the configuration of the object being manufactured, and the raw material needed to support the manufacturing process. The complementary challenge to the relevant fabrication processes is the possibility to achieve the required precision demanded by geometrically complex structures and the ability to be versatile in processing a broad material spectrum. In this context, novel lithographic 3D printing techniques will be an asset to pave the way towards overcoming these challenges. Currently, the European Space Agency (ESA) is investigating the implementation of such technology in the context of a lunar base. In particular, two different applications are being studied: • Lithography-Based Ceramic Manufacturing (LCM), where the ceramic powder is distributed in a photocurable monomer formulation in presence of a photoinitiator. Ceramic materials are extensively used in a vast number of technological processes as well as in space applications. They are usually considered as the material of choice for applications where other materials such as plastic and metal fail to deliver the required performance. The LCM process will also allow processing lunar regolith simulant adding value to the current material portfolio of this technique, as well as to the range of processes potentially applicable on the lunar or Martian surface. • Lithography-based Metal Manufacturing (LMM) for processing metallic powders. In contrast to the currently predominantly used powder bed fusion (direct metal laser melting) techniques, this process uses a paste/suspension as feedstock and hence, does not rely on the use of highly spherical gas atomized powders. This will enable the utilization of recycled powders from scrap metals that are available at Moon bases or of metallic alloys reduced from lunar regolith, thus providing higher flexibility in accepting raw material with poor quality and purity. The paper addresses the results from both activities in terms of printed parts quality (roughness, density, resolution and accuracy) as well as the implementation requirements for the whole process chain, including suitable pre- and post-processing steps, with the aim to achieve a zero-waste flow in a lunar environment.
|
|
| 4. |
- Nitsos, Christos, et al.
(author)
-
Isolation and Characterization of Organosolv and Alkaline Lignins from Hardwood and Softwood Biomass
- 2016
-
In: ACS Sustainable Chemistry and Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 4:10, s. 5181-5193
-
Journal article (peer-reviewed)abstract
- Isolation of lignins from hardwood and softwood biomass samples, containing 26.1% and 28.1% lignin, respectively, has been performed with the use of alkaline and organosolv pretreatment methods. The effect of catalyst loading, ethanol content, particle size, and pretreatment time on the yields and properties of the isolated lignins were investigated. Alkaline lignins had higher carbohydrate content - up to 30% - and exhibited higher molecular weights in the range of 3000 Da, with a maximum phenolic hydroxyl content of 1 mmol g-1 for birch and 2 mmol g-1 for spruce. Organosolv lignins, on the other hand, showed high purity - 93% or higher - despite the more extensive biomass dissolution into the pretreatment medium; they also exhibited a lower range of molecular weights between 600 and 1600 Da depending on the source and pretreatment conditions. Due to the lower molecular weight, phenolic hydroxyl content was also increased, reaching as high as 4 mmol g-1 with a simultaneous decrease in aliphatic hydroxyl content as low as 0.6 mmol g-1. Efficient lignin dissolution of 62% for spruce and 69% for birch, achieved at optimal pretreatment conditions, was combined with extensive hemicellulose removal
|
|
