| 1. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 2. |
- Abazov, V. M., et al.
(författare)
-
Evidence for production of single top quarks
- 2008
-
Ingår i: Physical Review D. - 1550-7998 .- 1550-2368. ; D:78, s. 012005-
-
Forskningsöversikt (refereegranskat)abstract
- We present first evidence for the production of single top quarks in the D0 detector at the Fermilab Tevatron p (p) over bar collider. The standard model predicts that the electroweak interaction can produce a top quark together with an antibottom quark or light quark, without the antiparticle top-quark partner that is always produced from strong-coupling processes. Top quarks were first observed in pair production in 1995, and since then, single top-quark production has been searched for in ever larger data sets. In this analysis, we select events from a 0.9 fb(-1) data set that have an electron or muon and missing transverse energy from the decay of a W boson from the top-quark decay, and two, three, or four jets, with one or two of the jets identified as originating from a b hadron decay. The selected events are mostly backgrounds such as W + jets and t (t) over bar events, which we separate from the expected signals using three multivariate analysis techniques: boosted decision trees, Bayesian neural networks, and matrix-element calculations. A binned likelihood fit of the signal cross section plus background to the data from the combination of the results from the three analysis methods gives a cross section for single top-quark production of sigma(p (p) over bar -> tb + X, tqb + X) = 4.7 +/- 1.3 pb. The probability to measure a cross section at this value or higher in the absence of signal is 0.014%, corresponding to a 3.6 standard deviation significance. The measured cross section value is compatible at the 10% level with the standard model prediction for electroweak top-quark production. We use the cross section measurement to directly determine the Cabibbo-Kobayashi-Maskawa quark mixing matrix element that describes the Wtb coupling and find vertical bar V(tb)f(1)(L)vertical bar = 1.31(-0.21)(+0.25), where f(1)(L) is a generic vector coupling. This model-independent measurement translates into 0.68 <= 1 at the 95% C.L. in the standard model.
|
|
| 3. |
- Huang, Hongyun, et al.
(författare)
-
Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)
- 2018
-
Ingår i: Cell Transplantation. - : SAGE Publications. - 0963-6897 .- 1555-3892. ; 27:2, s. 310-324
-
Forskningsöversikt (refereegranskat)abstract
- Cell therapy has been shown to be a key clinical therapeutic option for central nervous system diseases or damage. Standardization of clinical cell therapy procedures is an important task for professional associations devoted to cell therapy. The Chinese Branch of the International Association of Neurorestoratology (IANR) completed the first set of guidelines governing the clinical application of neurorestoration in 2011. The IANR and the Chinese Association of Neurorestoratology (CANR) collaborated to propose the current version "Clinical Cell Therapy Guidelines for Neurorestoration (IANR/CANR 2017)". The IANR council board members and CANR committee members approved this proposal on September 1, 2016, and recommend it to clinical practitioners of cellular therapy. These guidelines include items of cell type nomenclature, cell quality control, minimal suggested cell doses, patient-informed consent, indications for undergoing cell therapy, contraindications for undergoing cell therapy, documentation of procedure and therapy, safety evaluation, efficacy evaluation, policy of repeated treatments, do not charge patients for unproven therapies, basic principles of cell therapy, and publishing responsibility.
|
|
| 4. |
- Luo, Yifei, et al.
(författare)
-
Technology Roadmap for Flexible Sensors
- 2023
-
Ingår i: ACS Nano. - : American Chemical Society. - 1936-0851 .- 1936-086X. ; 17:6, s. 5211-5295
-
Forskningsöversikt (refereegranskat)abstract
- Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.
|
|
| 5. |
- You, Xiaohu, et al.
(författare)
-
Towards 6G wireless communication networks: vision, enabling technologies, and new paradigm shifts
- 2021
-
Ingår i: Science China Information Sciences. - : Science Press. - 1674-733X .- 1869-1919. ; 64:1
-
Forskningsöversikt (refereegranskat)abstract
- The fifth generation (5G) wireless communication networks are being deployed worldwide from 2020 and more capabilities are in the process of being standardized, such as mass connectivity, ultra-reliability, and guaranteed low latency. However, 5G will not meet all requirements of the future in 2030 and beyond, and sixth generation (6G) wireless communication networks are expected to provide global coverage, enhanced spectral/energy/cost efficiency, better intelligence level and security, etc. To meet these requirements, 6G networks will rely on new enabling technologies, i.e., air interface and transmission technologies and novel network architecture, such as waveform design, multiple access, channel coding schemes, multi-antenna technologies, network slicing, cell-free architecture, and cloud/fog/edge computing. Our vision on 6G is that it will have four new paradigm shifts. First, to satisfy the requirement of global coverage, 6G will not be limited to terrestrial communication networks, which will need to be complemented with non-terrestrial networks such as satellite and unmanned aerial vehicle (UAV) communication networks, thus achieving a space-air-ground-sea integrated communication network. Second, all spectra will be fully explored to further increase data rates and connection density, including the sub-6 GHz, millimeter wave (mmWave), terahertz (THz), and optical frequency bands. Third, facing the big datasets generated by the use of extremely heterogeneous networks, diverse communication scenarios, large numbers of antennas, wide bandwidths, and new service requirements, 6G networks will enable a new range of smart applications with the aid of artificial intelligence (AI) and big data technologies. Fourth, network security will have to be strengthened when developing 6G networks. This article provides a comprehensive survey of recent advances and future trends in these four aspects. Clearly, 6G with additional technical requirements beyond those of 5G will enable faster and further communications to the extent that the boundary between physical and cyber worlds disappears.
|
|
| 6. |
- Aamodt, K., et al.
(författare)
-
The ALICE experiment at the CERN LHC
- 2008
-
Ingår i: Journal of Instrumentation. - 1748-0221. ; 3:S08002
-
Forskningsöversikt (refereegranskat)abstract
- ALICE (A Large Ion Collider Experiment) is a general-purpose, heavy-ion detector at the CERN LHC which focuses on QCD, the strong-interaction sector of the Standard Model. It is designed to address the physics of strongly interacting matter and the quark-gluon plasma at extreme values of energy density and temperature in nucleus-nucleus collisions. Besides running with Pb ions, the physics programme includes collisions with lighter ions, lower energy running and dedicated proton-nucleus runs. ALICE will also take data with proton beams at the top LHC energy to collect reference data for the heavy-ion programme and to address several QCD topics for which ALICE is complementary to the other LHC detectors. The ALICE detector has been built by a collaboration including currently over 1000 physicists and engineers from 105 Institutes in 30 countries, Its overall dimensions are 16 x 16 x 26 m(3) with a total weight of approximately 10 000 t. The experiment consists of 18 different detector systems each with its own specific technology choice and design constraints, driven both by the physics requirements and the experimental conditions expected at LHC. The most stringent design constraint is to cope with the extreme particle multiplicity anticipated in central Pb-Pb collisions. The different subsystems were optimized to provide high-momentum resolution as well as excellent Particle Identification (PID) over a broad range in momentum, up to the highest multiplicities predicted for LHC. This will allow for comprehensive studies of hadrons, electrons, muons, and photons produced in the collision of heavy nuclei. Most detector systems are scheduled to be installed and ready for data taking by mid-2008 when the LHC is scheduled to start operation, with the exception of parts of the Photon Spectrometer (PHOS), Transition Radiation Detector (TRD) and Electro Magnetic Calorimeter (EMCal). These detectors will be completed for the high-luminosity ion run expected in 2010. This paper describes in detail the detector components as installed for the first data taking in the summer of 2008.
|
|
| 7. |
- Guo, Xugeng, et al.
(författare)
-
Recent research progress for upconversion assisted dye-sensitized solar cells
- 2021
-
Ingår i: Chinese Chemical Letters. - : Elsevier. - 1001-8417 .- 1878-5964. ; 32:6, s. 1834-1846
-
Forskningsöversikt (refereegranskat)abstract
- Upconversion (UC) technology makes it possible to harvest infrared (IR) light from the sun and has increasingly been employed in recent years to improve the efficiency of solar cells. The progress in the area concerns both research on fundamental principles and processes of UC and technologies of device fabrication. Significant increase of important solar cell parameters, like short-circuit photocurrent density and open-circuit photovoltage as well as the total photon-to-current efficiency, has been accomplished. We here review the research published during the last few years in the area, in particular we consider the two most cherished techniques, namely the incorporation of upconverting nanophosphors directly into the photoanodes of the solar cells and the introduction of plasmonic metal nanoparticles co-existing with the UC particles. Other ways to achieve strong field enhancement, and the use of the non-linear nature of UC, is to apply microlenses, with or without assisting plasmonic excitation. Further enhanced UC action has been demonstrated by broad band and effective harvesting by organic IR antennas, with subsequent mediation by an intermediate nanoshell of the energy into the upconverting core. Codoping, nanohybrid and layer-by-layer technologies involving upconverting particles as well as the use of upconverting nanoparticles in hole-transport and electrolyte layers, tested in recent works, are also reviewed. While most of these technologies employ upconverting rare earth metals for sequential photon absorption, the main alternative technique, namely triplet-triplet annihilation UC using organic materials, is also reviewed. It is our belief that all these approaches will be further much researched in the near future, with potentially great impact on solar cell technology.
|
|
| 8. |
- Qi, Yungeng, et al.
(författare)
-
Nanocellulose : a review on preparation routes and applications in functional materials
- 2023
-
Ingår i: Cellulose. - 0969-0239 .- 1572-882X. ; 30:7, s. 4115-4147
-
Forskningsöversikt (refereegranskat)abstract
- Nanocellulose has a wide range of applications in the field of functional materials, and it has piqued the interest of researchers for some time. This is because nanocellulose inherits the advantages of environmental friendliness and easy availability of plant cell walls in nature, as well as the unique morphology of nanostructures. This review presents four types of nanocellulose including cellulose nanocrystals (CNCs), cellulose nanofibrils (CNFs), regenerated nanocellulose (RNC) and bacterial cellulose (BC), introduces the different preparation routes and their mechanisms, analyzes the advantages and drawbacks between these approaches, and summarizes the potential applications in the field of functional materials such as reinforced composite materials, biomedical materials, soft templates, and optical materials. Finally, future development directions are proposed including further enrichment of nanocellulose raw materials, improvement of preparation methods to adapt to more diversified raw materials, and classification of products according to their morphology and properties to improve the use efficiency.
|
|
| 9. |
- Sun, Xu, et al.
(författare)
-
Chinese Herbal Medicine as Adjunctive Therapy to Chemotherapy for Breast Cancer : A Systematic Review and Meta-Analysis
- 2016
-
Ingår i: Evidence-based Complementary and Alternative Medicine. - : Hindawi Limited. - 1741-427X .- 1741-4288.
-
Forskningsöversikt (refereegranskat)abstract
- Chinese herbal medicine (CHM) has been increasingly employed during therapy for breast cancer, but its efficacy remains a matter of debate. This systematic review examined randomized controlled trials to provide a critical evaluation of this treatment. The results demonstrated that the combined use of CHM with chemotherapy may improve the immediate tumor response and reduce chemotherapy-associated adverse events. Our findings highlight the poor quality of Chinese studies, and additional well-designed randomized controlled trials addressing the role of CHM are warranted. The lack of molecular-based evidence for CHM and Zheng has resulted in a limited understanding and acceptance of CHM and traditional Chinese medicine in Western countries. We believe that researchers should immediately explore a CHM-based cure, and CHM should be applied to routine care as soon as conclusive data are available.
|
|
| 10. |
- Cao, Bin, et al.
(författare)
-
Delimiting species in Basidiomycota : a review
- 2021
-
Ingår i: Fungal diversity. - : Springer Nature. - 1560-2745 .- 1878-9129. ; 109:1, s. 181-237
-
Forskningsöversikt (refereegranskat)abstract
- Species delimitation is one of the most fundamental processes in biology. Biodiversity undertakings, for instance, require explicit species concepts and criteria for species delimitation in order to be relevant and translatable. However, a perfect species concept does not exist for Fungi. Here, we review the species concepts commonly used in Basidiomycota, the second largest phylum of Fungi that contains some of the best known species of mushrooms, rusts, smuts, and jelly fungi. In general, best practice is to delimitate species, publish new taxa, and conduct taxonomic revisions based on as many independent lines of evidence as possible, that is, by applying a so-called unifying (or integrative) conceptual framework. However, the types of data used vary considerably from group to group. For this reason we discuss the different classes of Basidiomycota, and for each provide: (i) a general introduction with difficulties faced in species recognition, (ii) species concepts and methods for species delimitation, and (iii) community recommendations and conclusions.
|
|
