| 1. |
|
|
| 2. |
|
|
| 3. |
- Gong, Pi Xian, et al.
(författare)
-
Comprehensive analysis of different types of ginsenosides in the different parts of American ginseng by targeted and nontargeted MS/MS scanning
- 2023
-
Ingår i: Journal of Food Science. - : Wiley. - 0022-1147 .- 1750-3841. ; 88:12, s. 5063-5077
-
Tidskriftsartikel (refereegranskat)abstract
- Abstract: To comprehensively study the ginsenosides distribution in the various tissues of American ginseng, the qualitative and quantitative-targeted and nontargeted mass spectroscopic methods were established using the high-performance liquid chromatography coupled with Qtrap triple quadrupole mass spectrometry (HPLC-QtrapQQQ-MS). The total ginsenosides of the root, stem, and leaf of American ginseng were determined by a colorimetric method, and the contents showed the order from high to low root, stem, and leaf. Eighty-two kinds of ginsenosides were detected in the different parts of American ginseng by enhanced mass scan–information-dependent data acquisition (IDA)–enhanced product ion (EPI) scan mode, including 69 from the root, 62 from the stem, and 48 from the leaf. An HPLC–multiple reaction monitoring (MRM) method was established, and 28 representative ginsenosides were further quantified in the three parts. Nearly all ginsenosides had the highest contents in the root and the lowest content in the leaf. Three types of ginsenosides (protopanaxadiol [PPD]-, protopanaxatiol [PPT]-, and oleanolic acid [OA]-types) were analyzed by precursor ion-IDA-EPI and MRM-IDA-EPI scan modes. Root had the most abundant ginsenosides in PPD- and PPT-type ginsenosides. Meanwhile, the OA-type ginsenosides are significantly enriched in the stem and leaf of American ginseng. The results provided a supplement to the quality assessment of American ginseng. Practical Application: The distribution profile of ginsenosides in the parts of American ginseng is different. Except for the root, the stem, and leaf of American ginseng have the most abundant ginsenosides in oleanolic acid type. The results reported herein can help the manufacturers choose appropriate materials to extract the ginsenosides.
|
|
| 4. |
- Qu, Minni, et al.
(författare)
-
Charge-Injection-Induced Time Decay in Carbon Nanotube Network-Based FETs
- 2010
-
Ingår i: IEEE Electron Device Letters. - 0741-3106 .- 1558-0563. ; 31:10, s. 1098-1100
-
Tidskriftsartikel (refereegranskat)abstract
- A voltage-pulse method is utilized to investigate the charge-injection-induced time decay of the source-drain current of field-effect transistors with randomly networked single-walled carbon nanotubes (CNTs) as the conduction channel. The relaxation of trapped carriers in the CNT networks can be accounted for by assuming two exponential decays occurring simultaneously. The slow decay is characterized by a time constant comparable to literature data obtained for a carrier recombination in the semiconducting CNTs. The faster decay with a time constant that has a smaller order of magnitude is attributed to the annihilation of trapped carriers in metallic CNTs or at metal-CNT contacts. Both time constants are gate-bias dependent.
|
|
| 5. |
- Tian, Yu-Peng, et al.
(författare)
-
Investigations and facile synthesis of a series of novel multi-functional two-photon absorption materials
- 2007
-
Ingår i: Journal of Materials Chemistry. - : Royal Society of Chemistry (RSC). - 0959-9428 .- 1364-5501. ; 17:34, s. 3646-3654
-
Tidskriftsartikel (refereegranskat)abstract
- Six centrosymmetric D-(pi-A)(3) structural triphenylamine derivatives that can be used as two- photon photopolymerization and optical data storage chromophores, tris[ 4-( 4- pyridylethenyl) phenyl] amine ( 1), tris[ 4-( 2- pyridylethenyl) phenyl] amine ( 2), tris( 4- cyanoethenylphenyl) amine ( 3), tris[ 4- butylacrylatephenyl] amine ( 4), tris[ 4- methylacrylatephenyl] amine ( 5) and tris[ 4- acrylicethenylphenyl] amine ( 6), have been successfully synthesized via a triple palladium-catalyzed Heck coupling reaction, and the novel chromophores were fully characterized by elemental analysis, IR, (1)H-NMR and ESIMS. The structure for 3 was determined by single crystal X-ray diffraction study. One- and two-photon absorption and fluorescence in various solvents were experimentally investigated. Two-photon initiated polymerization microfabrication and optical data recording experiments were carried out under 780 nm laser radiation, and the possible polymerization mechanism is discussed based on theoretical calculations. All the six chromophores have relatively large two-photon absorption crosssections, and exhibit optical memory and highly efficient two-photon initiated polymerization abilities.
|
|
| 6. |
- Chen, Hui, et al.
(författare)
-
A CORDIC-Based Architecture with Adjustable Precision and Flexible Scalability to Implement Sigmoid and Tanh Functions
- 2020
-
Ingår i: IEEE International Symposium on Circuits and Systems, ISCAS 2020. - : IEEE.
-
Konferensbidrag (refereegranskat)abstract
- In the artificial neural networks, tanh (hyperbolic tangent) and sigmoid functions are widely used as activation functions. Past methods to compute them may have shortcomings such as low precision or inflexible architecture that is difficult to expand, so we propose a CORDIC-based architecture to implement sigmoid and tanh functions, which has adjustable precision and flexible scalability. It just needs shift-add-or-subtract operations to compute high-accuracy results and is easy to expand the input range through scaling the negative iterations of CORDIC without changing the original architecture. We adopt the control variable method to explore the accuracy distribution through software simulation. A specific case (ARCH:(1, 15, 18), RMSE: 10(-6)) is designed and synthesized under the TSMC 40nm CMOS technology, the report shows that it has the area of 36512.78 mu m(2) and power of 12.35mW at the frequency of 1GHz. The maximum work frequency can reach 1.5GHz, which is better than the state-of-the-art methods.
|
|
| 7. |
- Chen, Hui, et al.
(författare)
-
A General Methodology and Architecture for Arbitrary Complex Number Nth Root Computation
- 2021
-
Ingår i: 2021 SCAS 2021/IEEE International Symposium on Circuits and Systems. - : Institute of Electrical and Electronics Engineers (IEEE).
-
Konferensbidrag (refereegranskat)abstract
- As the existing complex number Nth root computation methods are relatively discrete, we propose a general method and architecture based on coordinate rotation digital computer (CORDIC) to compute arbitrary complex number Nth root for the first time. Our method performs the tasks of computing complex modulus, complex phase angle, real Nth root, sine function and cosine function, which can be implemented by circular CORDIC, linear CORDIC and hyperbolic CORDIC. Based on these CORDICs, our proposed architecture can not only improve the hardware efficiency just through shift-add operations, but also flexibly adjust the precision and the input range of complex number Nth root. To prove its feasibility, we conduct a software simulation and implement an example circuit in hardware. Under the TSMC 28nm CMOS technology, we synthesize it and get the report that it has the area of 6561 mu m(2) and the power of 3.95mW at the frequency of 1.5GHz.
|
|
| 8. |
- Chen, Hui, et al.
(författare)
-
An Efficient Hardware Architecture with Adjustable Precision and Extensible Range to Implement Sigmoid and Tanh Functions
- 2020
-
Ingår i: Electronics. - : MDPI. - 2079-9292. ; 9:10
-
Tidskriftsartikel (refereegranskat)abstract
- The efficient and precise hardware implementations of tanh and sigmoid functions play an important role in various neural network algorithms. Different applications have different requirements for accuracy. However, it is difficult for traditional methods to achieve adjustable precision. Therefore, we propose an efficient-hardware, adjustable-precision and high-speed architecture to implement them for the first time. Firstly, we present two methods to implement sigmoid and tanh functions. One is based on the rotation mode of hyperbolic CORDIC and the vector mode of linear CORDIC (called RHC-VLC), another is based on the carry-save method and the vector mode of linear CORDIC (called CSM-VLC). We validate the two methods by MATLAB and RTL implementations. Synthesized under the TSMC 40 nm CMOS technology, we find that a special case AR divide VR(3,0), based on RHC-VLC method, has the area of 4290.98 mu m2 and the power of 1.69 mW at the frequency of 1.5 GHz. However, under the same frequency, AR divide VC(3) (a special case based on CSM-VLC method) costs 3196.36 mu m2 area and 1.38 mW power. They are both superior to existing methods for implementing such an architecture with adjustable precision.
|
|
| 9. |
- Chen, Hui, et al.
(författare)
-
Hyperbolic CORDIC-Based Architecture for Computing Logarithm and Its Implementation
- 2020
-
Ingår i: IEEE Transactions on Circuits and Systems - II - Express Briefs. - : Institute of Electrical and Electronics Engineers (IEEE). - 1549-7747 .- 1558-3791. ; 67:11, s. 2652-2656
-
Tidskriftsartikel (refereegranskat)abstract
- We present a CORDIC (Coordinate Rotation Digital Computer)-based method to compute the logarithm function with base 2 and validate this method by software simulation and hardware implementation. Technically, we overcome the limitation of traditional hyperbolic CORDIC and transform it based on the idea of generalized hyperbolic CORDIC so that it can be used to compute $log_{2}x\;(x\;\epsilon \;[1,2))$ . The proposed method requires only simple shift-and-add operations and has a great tradeoff between precision (or speed) and area. In MATLAB, we provide different precisions corresponding to the iterations of the transformed CORDIC for user needs. Using a pipelined structure and setting the number of iterations to be 16 (the average relative error is $2.09\times 10<^>{-6}$ ), we implement an example hardware circuit. Synthesized under the SMIC 65nm CMOS technology, the circuit has an area of 24100 $\mu m<^>{2}$ and computation time of 11.1 ns, which can save 31.04x0025; area and improve 6.92x0025; computation speed averagely compared with existing methods.
|
|
| 10. |
- Chen, Hui, et al.
(författare)
-
Low-Complexity High-Precision Method and Architecture for Computing the Logarithm of Complex Numbers
- 2021
-
Ingår i: IEEE Transactions on Circuits and Systems Part 1. - : Institute of Electrical and Electronics Engineers (IEEE). - 1549-8328 .- 1558-0806. ; 68:8, s. 3293-3304
-
Tidskriftsartikel (refereegranskat)abstract
- This paper proposes a low-complexity method and architecture to compute the logarithm of complex numbers based on coordinate rotation digital computer (CORDIC). Our method takes advantage of the vector mode of circular CORDIC and hyperbolic CORDIC, which only needs shift-add operations in its hardware implementation. Our architecture has lower design complexity and higher performance compared with conventional architectures. Through software simulation, we show that this method can achieve high precision for logarithm computation, reaching the relative error of 10(-7). Finally, we design and implement an example circuit under TSMC 28nm CMOS technology. According to the synthesis report, our architecture has smaller area, lower power consumption, higher precision and wider operation range compared with the alternative architectures.
|
|
