| 1. |
- Wang, J., et al.
(författare)
-
Final report of the CCQM-K145 : Toxic and essential elements in bovine liver
- 2020
-
Ingår i: Metrologia. - : IOP Publishing Ltd. - 0026-1394 .- 1681-7575. ; 57:1 A
-
Tidskriftsartikel (refereegranskat)abstract
- Liver plays a major role in metabolism and acts as a source of energy for the body by storing glycogen. With the growing interest and investigation in the biological effects in recent years, it is important and necessary to develop accurate and comparable analytical methods for elements in bio-samples. It has, however, been 10 years since the tissue sample (bovine liver) of CCQM-K49 key comparison. The purpose of CCQM-K145 is to ensure the comparable and traceable measurement results for essential and toxic elements such as P, S, Zn, Mn, Ni, Mo, Sr, Cr, Co, Pb, As and Hg in bovine liver among NMIs and other designated measurement bodies worldwide. The comparison was agreed by IAWG as 6th IAWG Benchmarking Exercise with Zn and Ni as exemplary elements at the meeting in Korea in the early October 2016. The results of CCQM-K145 are expected to cover the measurement capability and support CMCs claiming for inorganic elements in the similar biological tissue materials and food samples. 30 NMIs and DIs registered in CCQM-K145. With respect to the methodology, a variety of techniques such as IDMS, ICP-OES, ICP-MS(non-ID), AAS and NAA were adopted by the participants. For Zn, Ni, Sr, Pb and Hg measurements, most participants chose ID-ICP-MS method, which showed the better performance in terms of consistency and reliability of the measurement results. In aspect of the traceability for the measurement results in CCQM-K145, most participants used their own (in house) CRMs or other NMI's CRMs to guarantee trace to SI unit. Most participants used similar matrix CRMs for quality control or method validation. Base on different statistic way to calculate the reference mass fraction values and associated uncertainties for each measurand, removal of the suspected extreme values, and discussion at the IAWG meetings, the median values are proposed as the KCRV for Zn, Ni, Mn, Mo, Cr, Pb and Hg; the arithmetic mean values are proposed as the KCRV for P, S, Sr, Co and As. In general, the performances of the majority of CCQM-K145 participants are very good, illustrating their measurement capabilities for Zn, Ni, P, S, Mn, Mo, Sr, Cr, As, Co, Pb and Hg in a complex biological tissue matrix. Bovine liver contains many kinds of nutrients and microelements, it can be regarded as a typical representative material of biological tissue and food. In CCQM-K145, the analytes involved alkali metals and transition elements, metalloids/semi-metals and non metals with a range of mass fraction from mg/g to μg/kg. CCQM-K145 also tested the ability of NMIs/DIs to determine elements that were easy to be lost and polluted, and interfered significantly. The chemical pretreatment methods of samples used in the comparison is suitable for general food and biological matrix samples. A variety of measurement methods used in the comparison represent the main instrumental technology for elemental analysis. Therefore, for supporting CMC claim, CCQM-K145 is readily applicable to measurement of more elements in a wide range of biological materials (including liquids and solids) and meat products. Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).
|
|
| 2. |
- Mo, Lixin, et al.
(författare)
-
On the temperature dependency and reversibility of sheet resistance of silver nanoparticles covered by 3-mercaptopropionic acid
- 2017
-
Ingår i: Journal of materials science. Materials in electronics. - : Springer Science and Business Media LLC. - 0957-4522 .- 1573-482X. ; 28:5, s. 4035-4043
-
Tidskriftsartikel (refereegranskat)abstract
- The temperature dependency and reversibility of the sheet resistance of silver nanoparticles covered by 3-mercaptopropionic acid (Ag-MPA) molecules, used in the printed temperature sensor, has been investigated. The microstructural evaluation, the FTIR spectra and thermal property analyses of the Ag-MPA films suggest co-existence of both weakly adsorbed as well as firmly adsorbed MPA molecules on the surface of Ag nanoparticles. The weakly adsorbed MPA molecules was to a great extent be desorbed and removed from the surfaces of silver nanoparticles when heated up to 180 °C for the first time. While the firmly adsorbed MPA molecules remain on the surfaces of silver nanoparticles even at higher temperature. Yet the firmly adsorbed MPA molecules are likely having gone through a transformation circle from/to the gauche and trans conformations in correspondence to a heating and cooling cycle, which results in temperature dependent and reversible sheet resistance. The MPA molecules in the gauche conformation are more densely packed on the surface of silver nanoparticles and can hinder the electron’s movability within the Ag-MPA film. While in the trans conformation with lower ‘surface space’ coverage by the MPA molecules, electrons move more freely within the film. Based on the temperature dependent nature, the fully printed temperature sensor using the Ag-MPA nanoparticles as the functional layer was made, of which the highest sensitivity is 5.12% °C−1 at 200 °C.
|
|
| 3. |
- Lyu, Z., et al.
(författare)
-
Preamble-Free Synchronization Based on Dual-chirp Waveforms for Photonic THz-ISAC
- 2023
-
Ingår i: Journal of Lightwave Technology. - 0733-8724 .- 1558-2213.
-
Tidskriftsartikel (refereegranskat)abstract
- The integrated sensing and communication (ISAC) systems based on the linear frequency modulation (LFM) waveforms have attracted substantial attention. However, existing routines suffer from additional synchronization preamble overhead, which limits both communication and sensing performance. This work, using the dual-chirp with opposite slopes, exploits a preamble-free synchronization scheme for the LFM-based ISAC. We first theoretically analyze the quasi-orthogonal property of the proposed dual-chirp LFM waveform and derive its achievable communication rate and range ambiguity function. A photonics-assisted proof-of-concept ISAC experiment is conducted in the 300 GHz frequency band, achieving a 20 Gbps data rate with a distinguished peak sidelobe ratio (PSLR) of up to 29.2 dB and 1.5 cm range resolution. More importantly, less than 0.5% synchronous power overhead is needed in our scheme. In addition, the performance trade-off induced by the data rate and amplitude ratio is validated in the experiment, which is in line with our theoretical analysis. Therefore, the proposed scheme provides a promising solution for synchronizing LFM-based future ISAC systems.
|
|
| 4. |
|
|
| 5. |
|
|
| 6. |
- Niimi, Jun, et al.
(författare)
-
Wine consumers' subjective responses to wine mouthfeel and understanding of wine body
- 2017
-
Ingår i: Food Research International. - : Elsevier Ltd. - 0963-9969 .- 1873-7145. ; 99, s. 115-122
-
Tidskriftsartikel (refereegranskat)abstract
- Wine mouthfeel is considered important for wine quality by experts, while consumers understanding of mouthfeel and the role of wine body in their wine choice is unknown. One experiment determined the influence of intrinsic wine mouthfeel on consumers' wine liking and emotions, and the other, how consumers understand the term wine body. The first experiment used a 2 astringency level × 2 body level experimental design. The samples were base wine with; nothing added (control), added xanthan gum (for increased body), added grape seed extract (GSE, for increased astringency), and with both added xanthan gum and GSE. The consumer taste trial (n = 112) indicated that wine with increased body did not influence wine liking and emotions; while increased astringency decreased liking and elicited more intense negative emotions. The second experiment examined consumers' knowledge of wine body through an online survey (n = 136). Consumers described wine body most frequently using words such as flavour, fullness, and strength. Wine body was therefore understood by consumers predominantly as a holistic multi-sensory perception of flavour. Wine flavour was indicated by consumers to be the most important factor driving purchase decisions followed by balance of flavours and wine body. It is crucial that wine professionals carefully communicate wine characteristics to consumers to prevent possible misunderstandings such as the meaning of wine body and as a result better meet consumer expectations. In future, the term body may benefit from a clearer definition for academic research as well as industry.
|
|
| 7. |
- Arrhenius, Karine, et al.
(författare)
-
Traceable reference gas mixtures for sulfur-free natural gas odorants
- 2014
-
Ingår i: Analytical Chemistry. - : American Chemical Society (ACS). - 0003-2700 .- 1520-6882. ; 13:1, s. 6695-6702
-
Tidskriftsartikel (refereegranskat)abstract
- The first reference gas mixtures of sulfur-free natural gas odorants that are traceable to the International System of Units (SI) have been produced and their compositions validated. These mixtures, which contain methyl acrylate and ethyl acrylate at amount fractions between 1.1 and 2.1 μmol mol-1, can be used to underpin measurements of sulfur-free odorants, which are increasingly being used to odorize natural gas in transmission networks as they have less harmful properties than traditional sulfur-containing odorants. The reference gas mixtures produced have been shown to be stable in passivated aluminum cylinders for at least 8 months and have been validated (to within 6% or less) by interlaboratory measurements at three National Measurement Institutes. The stability of methyl acrylate and ethyl acrylate in gas sampling bags has been investigated, and the challenges of analyzing 2-ethyl-3- methylpyrazine, which is used as a stabilizer in sulfur-free odorants, are also briefly discussed.
|
|
| 8. |
- Boddaert, S., et al.
(författare)
-
Fire safety of BIPV : International mapping of accredited and R&D facilities in the context of codes and standards 2023
- 2023
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- The objective of Task 15 of the IEA Photovoltaic Power Systems Programme is to create an enabling framework to accelerate the penetration of BIPV products in the global market of renewables, resulting in an equal playing field for BIPV products, BAPV products and regular building envelope components, respecting mandatory issues, aesthetic issues, reliability issues, and financial issues.Subtask E of Task 15 is focused on pre-normative international research on BIPV characterisation methods and activity E.3 is dedicated to fire safety of BIPV modules and installations.
|
|
| 9. |
- Buker, O., et al.
(författare)
-
Metrological support for LNG custody transfer and transport
- 2016
-
Ingår i: Proceedings of the 17th International Flow Measurement Conference (FLOMEKO 2016).
-
Konferensbidrag (refereegranskat)abstract
- In the framework of the ongoing EMRP Joint Research Project (JRP) ENG 60 “Metrology for LNG” (2014-2017), co-funded by the European Union, a number of metrological challenges associated with custody transfer and transport of LNG will be faced. The project consists of four technical work packages (WP), whereby the main objective is to reduce the measurement uncertainty of LNG custody transfer by a factor two. The focus in WP1 is the design and development of a traceable mid-scale calibration standard for LNG mass and volume flow. The goal is to provide traceable mass and volume flow calibrations up to 400 m3/h (180000 kg/h). In WP2, the emphasis is on the development and validation of a LNG sampling and composition measurement reference standard, consisting of sampler, vaporizer, gas standards, and gas chromatography (GC), which will be used to test and calibrate commercially available LNG sampling and composition measurement systems. The priority in WP3 is given to the development and validation of a method for the determination of the methane number, including correlations based on the LNG composition and corrections for traces of nitrogen and higher hydrocarbons. Since physical properties and quantities play an important role in LNG custody transfer, WP4 comprises reference quality density measurements of LNG to validate and improve models for LNG density predictions, the uncertainty evaluation of enthalpy and calorific value calculations and the development of a novel cryogenic sensor for the simultaneous measurement of speed-of-sound and density. The present paper gives an overview of recently achieved objectives within the project and provides an outlook to future activities.
|
|
| 10. |
|
|
