| 1. |
- Fan, Q., et al.
(författare)
-
The effect of functionalized silver on properties of conductive adhesives
- 2011
-
Ingår i: Proceedings - 12th International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2011, Shanghai, 8-11 August 2011. - 9781457717680 ; , s. 423-425
-
Konferensbidrag (refereegranskat)abstract
- This research used low molecular surface modifiers and observed that chemisorptions took place through the formation of a bond between silver surface and an adsorbed molecule, which improved the dispersion of silver flakes in the organic resin. Results of shear viscosity, bulk resistivity etc. showed that by using these low molecular organic functionalizers, isotropic conductive adhesives (ICAs) with lower shear viscosity and better electrical conductivity at high silver fillers content were obtained. Different processing methods and different matrixes were compared.
|
|
| 2. |
- Fan, Q., et al.
(författare)
-
The effect of functionalized silver on rheological and electrical properties of conductive adhesives
- 2011
-
Ingår i: ECS Transactions. - : The Electrochemical Society. - 1938-5862 .- 1938-6737. - 9781607682356 ; 34:1, s. 811-816
-
Konferensbidrag (refereegranskat)abstract
- This research used low molecular surface modifiers, and observed that chemisorptions took place through the formation of a bond between silver surface and an adsorbed molecule, which improved the dispersion of silver flakes in the organic resin. Several different functionalizers, such as thioglycolic acid, silane and di-acid, were used to functionalize the silver surface. Results of shear viscosity, bulk resistivity etc. showed that by using these low molecular organic functionalizers, isotropic conductive adhesives (ICAs) with lower shear viscosity and better electrical conductivity at high silver fillers content were obtained. The adipic acid had the greatest effect on the rheological and electrical property of ICAs, so its weight percentage in silver flakes was also optimized; ICAs displayed the maximum electrical conductivity when there was 0.5 wt% of silver flakes.
|
|
| 3. |
- Li, D., et al.
(författare)
-
Study into the application of single-wall carbon nanotubes in isotropic conductive adhesives
- 2011
-
Ingår i: Proceedings - 12th International Conference on Electronic Packaging Technology and High Density Packaging, ICEPT-HDP 2011, Shanghai, 8-11 August 2011. - 9781457717680 ; , s. 430-435
-
Konferensbidrag (refereegranskat)abstract
- Isotropic conductive adhesives (ICAs) with stable contact resistance and high thermal conductivity are highly desirable. In this paper, a new ICA filled with silver fillers and single-wall carbon nanotubes (SCNTs) was developed. SCNTs were acidified in a mixture of 98% H2S04 and 68% HN03 with a volume rate of 3:1 at 50 °C for 3 h. Carboxyl and hydroxyl groups were produced on SCNTs, and the purity of SCNTs also greatly improved. To prepare the ICAs, acidified SCNTs were firstly ultrasonically dispersed in acetone, then added into the matrix resin, and finally mixed with silver fillers. The bulk resistivity of the fabricated ICAs filled with silver fillers and acidified SCNTs was larger, their lap shear strength lower, their contact resistance stability improved, and their moisture absorption remained almost unchanged. In the curing process, the released heat was greatly reduced and transferred to the surroundings for good thermal conductivity of SCNTs, but the curing temperature was not affected. Therefore, acidified SCNTs can be used in ICAs, and in general, will create a good effect on ICAs.
|
|
