| 1. |
- Zhang, Dongsheng, et al.
(author)
-
Thermal properties of TIM using CNTs forest in electronics packaging
- 2016
-
In: 2016 17th International Conference on Electronic Packaging Technology, ICEPT 2016; Wuhan Optics Valley Kingdom Hotel Wuhan; China; 16 August 2016 through 19 August 2016. ; , s. 1355-1359
-
Conference paper (peer-reviewed)abstract
- Thermal interface material (TIM) is applied to fill the air gaps of interfaces, which provides a path for interfacial heat transfer. Owing to the exceptional thermal properties of carbon nanotubes (CNT), TIMs based on CNTs have received much attention in recent years. In this study, heat dissipation performance of vertically aligned carbon nanotubes (VACNT) arrays as TIM in electronic packing was analyzed. Vertically aligned carbon nanotubes with length of 245?m and 763?m were synthesized on a silicon substrate by chemical vapor deposition respectively. Morphology of the vertically aligned carbon nanotubes was characterized by scanning electron microscope. The hotspot temperature of thermal test chip with vertically aligned carbon nanotubes were characterized by resistance temperature detector method and infrared imaging method.
|
|
| 2. |
- Huang, Shirong, et al.
(author)
-
Infrared Emissivity Measurement for Vertically Aligned Multiwall Carbon Nanotubes (CNTs) Based Heat Spreader Applied in High Power Electronics Packaging
- 2016
-
In: 6th Electronic System-integration Technology Conference (ESTC 2016). - 9781509014026 ; , s. Article no 7764696-
-
Conference paper (peer-reviewed)abstract
- Vertically-aligned multiwall carbon nanotubes were deposited on silicon substrate by low pressure chemical vapor deposition (LPCVD), which can be utilized as heat spreaders in high power electronic packaging due to their remarkable thermal conductivity. The infrared emissivity of the vertically aligned multiwall carbon nanotubes was then characterized based on the FLIR SC600 infrared imaging system. The average infrared emissivity of the multiwall carbon nanotubes sample was about 0.92, which agrees well with experimental results reported before. Scanning electron microscopy (SEM) images of the multiwall carbon nanotubes were further analyzed to explain its high emissivity, and the reason can be attributed to the homogeneous sparseness and aligned structure of the vertically aligned multiwall carbon nanotubes
|
|
| 3. |
- Huang, Shirong, et al.
(author)
-
The Effects of Graphene-Based Films as Heat Spreaders for Thermal Management in Electronic Packaging
- 2016
-
In: 2016 17th International Conference on Electronic Packaging Technology, ICEPT 2016. - 9781509013968 ; , s. Art no 7583272; Pages 889-892
-
Conference paper (peer-reviewed)abstract
- Graphene-based films (GBF) were fabricated using a chemical conversion process including graphene oxide (GO) preparation by use of Hummer’s method, graphene oxide reduction using L-ascorbic acid (LAA), and finally film formation by vacuum filtration. GBF is considered as a candidate material for thermal management, i.e. for removing heat from hotspots in power electronic packaging, due to its high thermal conductivity. In this work, the GBF heat spreading performance in 3D TSV packaging was analysed using finite element methods (FEM) implemented in the COMSOL software. Both size effects and the influence of the thermal conductivity of the GBF heat spreader on the thermal performance of the 3D TSV package were evaluated. Furthermore, the size effects of the thermal conductive adhesive (TCA) underfill between the chip and the printed circuit board (PCB) were analysed. The results obtained are critical for proper design of graphene-based lateral heat spreaders in high power electronic packaging.
|
|
