| 1. |
- Daon, J., et al.
(författare)
-
Chemically enhanced carbon nanotubes based Thermal Interface Materials
- 2015
-
Ingår i: THERMINIC 2015 - 21st International Workshop on Thermal Investigations of ICs and Systems 2015. - 9781467397056
-
Konferensbidrag (refereegranskat)abstract
- With progress in microelectronics the component density on a device increases drastically. As a consequence the power density reaches levels that challenge device reliability. New heat dissipation strategies are needed to efficiently drain heat. Thermal Interface Materials (TIMs) are usually used to transfer heat across interfaces, for example between a device and its packaging. Vertically Aligned Carbon Nanotubes (VACNTs) can be used to play this role. Indeed, carbon nanotubes are among the best thermal conductors (similar to 3.000 W/mK) and in the form of VACNT mats, show interesting mechanical properties. On one side, VACNTs are in contact with their growth substrate and there is a low thermal resistance. On the other side, good contact must be created between the opposite substrate and the VACNTs in order to decrease the contact thermal resistance. A thin-film deposition of an amorphous material can be used to play this role. This paper reports a chemically enhanced carbon nanotube based TIM with creation of chemical bonds between the polymer and VACNTs. We show that these covalent bonds enhance the thermal transfer from VACNTs to a copper substrate and can dramatically decrease local resistances. Implementation processes and thermal characterizations of TIMs are studied and reported.
|
|
| 2. |
- Fu, Yifeng, 1984, et al.
(författare)
-
Carbon nanotube growth on different underlayers for thermal interface material application
- 2016
-
Ingår i: IMAPS Nordic Annual Conference 2016 Proceedings. - 9781510827226
-
Konferensbidrag (refereegranskat)abstract
- Thermal interface material (TIM) is a critical component in thermal management of high density packaging systems since both the reliability and lifetime of microsystems are dependent on how the heat is dissipated. Carbon nanotubes (CNTs) are promising candidate for development of TIMs due to their excellent thermal and mechanical properties. The thermal conductivity of CNTs can be up to 3000 W/mK in the longitudinal direction which acts as ideal heat transfer path. However, the huge interfacial thermal resistance between CNTs and contact surface hinders the exploitation of CNTs as TIMs. In this paper, we will focus on the growth of CNTs on various substrates and underlayers and analyze the interaction between catalyst and underlayer materials. Microscopic analysis is performed to characterize the quality of the CNT materials and monitor the diffusion of Fe particles into different barrier layers. Thermal conductivity of the CNT TIMs will be measured to examine the performance of the materials.
|
|
| 3. |
- Nylander, Andreas, 1988, et al.
(författare)
-
Reliability investigation of a carbon nanotube array thermal interface material
- 2019
-
Ingår i: Energies. - : MDPI AG. - 1996-1073 .- 1996-1073. ; 12:11
-
Tidskriftsartikel (refereegranskat)abstract
- As feature density increases within microelectronics, so does the dissipated power density, which puts an increased demand on thermal management. Thermal interface materials (TIMs) are used at the interface between contacting surfaces to reduce the thermal resistance, and is a critical component within many electronics systems. Arrays of carbon nanotubes (CNTs) have gained significant interest for application as TIMs, due to the high thermal conductivity, no internal thermal contact resistances and an excellent conformability. While studies show excellent thermal performance, there has to date been no investigation into the reliability of CNT array TIMs. In this study, CNT array TIMs bonded with polymer to close a Si-Cu interface were subjected to thermal cycling. Thermal interface resistance measurements showed a large degradation of the thermal performance of the interface within the first 100 cycles. More detailed thermal investigation of the interface components showed that the connection between CNTs and catalyst substrate degrades during thermal cycling even in the absence of thermal expansion mismatch, and the nature of this degradation was further analyzed using X-ray photoelectron spectroscopy. This study indicates that the reliability will be an important consideration for further development and commercialization of CNT array TIMs.
|
|
