| 1. |
- Carnohan, Shane, et al.
(författare)
-
Next generation application of DPSIR for sustainable policy implementation
- 2023
-
Ingår i: Current Research in Environmental Sustainability. - : Elsevier B.V.. - 2666-0490. ; 5
-
Tidskriftsartikel (refereegranskat)abstract
- As our societies and natural systems are becoming ever more interconnected, it is critical that sustainable management can adapt to new knowledge from both the ecological and the social domains, and act on it in a timely and effective manner. This need is amplifying in the Anthropocene as we are approaching the limit for humanity's safe operating space, leading to irreversible change to ecosystem function. This urgently requires increased attention and concern regarding the information feedbacks between the silos of science, policy and society. A web of policies is in place to protect the health of people and the planet, but to ensure that they are effective we need frameworks to make sense of real-world complexities and interlinkages between multiple factors. The Drivers-Pressures-State-Impacts-Response (DPSIR) framework was created for this purpose, however, its' implicit focus on 1) analytical and 2) procedural aspects must be made explicit, to enable coordination across silos and studies. Continued creation of new DPSIR derivatives may limit its impact, while more explicit coordination between these two aspects can improve the effectiveness of DPSIR while retaining its flexibility. We thus propose five elements to support sustainable policy development and implementation using DPSIR: 1) iteration; 2) risk, uncertainty and analytical bias; 3) flexible integration; 4) use of quantitative methods, and; 5) clear and standard definitions for DPSIR. We illustrate these elements in four cases: Three highlight missing feedbacks when DPSIR elements are not made explicit and a fourth case – on per-and-polyfluorinated alkyl substances (PFAS) – showing a potential roadmap to successful policy implementation using DPSIR. © 2022 The Authors
|
|
| 2. |
- Fu, Yifeng, 1984, et al.
(författare)
-
Templated Growth of Covalently Bonded Three-Dimensional Carbon Nanotube Networks Originated from Graphene
- 2012
-
Ingår i: Advanced Materials. - : Wiley. - 0935-9648 .- 1521-4095. ; 24:12, s. 1576-1581
-
Tidskriftsartikel (refereegranskat)abstract
- A template-assisted method that enables the growth of covalently bonded three-dimensional carbon nanotubes (CNTs) originating from graphene at a large scale is demonstrated. Atomic force microscopy-based mechanical tests show that the covalently bonded CNT structure can effectively distribute external loading throughout the network to improve the mechanical strength of the material.
|
|
| 3. |
|
|
| 4. |
|
|
| 5. |
- Sun, Vivian Z., et al.
(författare)
-
Overview and Results From the Mars 2020 Perseverance Rover's First Science Campaign on the Jezero Crater Floor
- 2023
-
Ingår i: Journal of Geophysical Research: Planets. - : John Wiley and Sons Inc. - 2169-9097 .- 2169-9100. ; 128:6
-
Tidskriftsartikel (refereegranskat)abstract
- The Mars 2020 Perseverance rover landed in Jezero crater on 18 February 2021. After a 100-sol period of commissioning and the Ingenuity Helicopter technology demonstration, Perseverance began its first science campaign to explore the enigmatic Jezero crater floor, whose igneous or sedimentary origins have been much debated in the scientific community. This paper describes the campaign plan developed to explore the crater floor's Máaz and Séítah formations and summarizes the results of the campaign between sols 100–379. By the end of the campaign, Perseverance had traversed more than 5 km, created seven abrasion patches, and sealed nine samples and a witness tube. Analysis of remote and proximity science observations show that the Máaz and Séítah formations are igneous in origin and composed of five and two geologic members, respectively. The Séítah formation represents the olivine-rich cumulate formed from differentiation of a slowly cooling melt or magma body, and the Máaz formation likely represents a separate series of lava flows emplaced after Séítah. The Máaz and Séítah rocks also preserve evidence of multiple episodes of aqueous alteration in secondary minerals like carbonate, Fe/Mg phyllosilicates, sulfates, and perchlorate, and surficial coatings. Post-emplacement processes tilted the rocks near the Máaz-Séítah contact and substantial erosion modified the crater floor rocks to their present-day expressions. Results from this crater floor campaign, including those obtained upon return of the collected samples, will help to build the geologic history of events that occurred in Jezero crater and provide time constraints on the formation of the Jezero delta.
|
|
| 6. |
- Jiang, L., et al.
(författare)
-
Experimental investigation on BOF slag oxidation in air
- 2019
-
Ingår i: Ironmaking & steelmaking. - : Taylor and Francis Ltd.. - 0301-9233 .- 1743-2812. ; 46:8, s. 747-754
-
Tidskriftsartikel (refereegranskat)abstract
- Basic oxygen furnace (BOF) slag contains a significant amount of iron-containing species, which is considered to be iron resources and therefore need to be recovered. In this work, the oxidation behaviour of BOF slag under air (at selected oxidation temperatures and holding time) was investigated to explore the potential of transforming non-magnetic wustite in the BOF slag into magnetic spinel, which may subsequently be recovered by magnetic separation. The experimental results show that the iron-containing spices in the BOF slag can be oxidised into magnetic spinel phases in the investigated temperature range of 1000–1150°C and thereafter be recovered by magnetic separation. The formation of these phases is closely related to the oxidation temperatures and holding time: a higher oxidation temperature and longer holding time lead to a larger amount of formed magnetic species; however, the amount of formed magnetic species decreases at elevated temperature (>1050°C) and with extended holding time (>40 min).
|
|
| 7. |
- Ozolins, Oskars, et al.
(författare)
-
7×149 Gbit/s PAM4 transmission over 1 km multicore fiber for short-reach optical interconnects
- 2018
-
Ingår i: Optics InfoBase Conference Papers. - : Optics Info Base, Optical Society of America. - 9781557528209
-
Konferensbidrag (refereegranskat)abstract
- We transmit 80 Gbaud/λ/core PAM4 signal enabled by 1.55 μm EML over 1 km 7-core fiber. The solution achieves single-wavelength and single-fiber 1.04 Tbit/s post-FEC transmission enhancing bandwidth-density for short-reach optical interconnects.
|
|
| 8. |
- Rouhi, Mohammad, et al.
(författare)
-
Effects of manufacturing on the structural performance of composites in vacuum assisted resin transfer molding
- 2023
-
Ingår i: Journal of reinforced plastics and composites (Print). - : SAGE Publications Ltd. - 0731-6844 .- 1530-7964. ; 42, s. 264-
-
Tidskriftsartikel (refereegranskat)abstract
- This work focuses on developing a seamlessly integrated modeling platform for manufacturing, designing, and analyzing fiber-reinforced composite structures. The manufacturing method is vacuum assisted resin transfer molding, and the analysis method is the finite element method. The unique integration of two commercial software (Moldex3D and ABAQUS) with additional interfaces and physics-based micromechanics enables variabilities during the manufacturing to be directly embedded into the structural analysis. The manufacturing output is the resin pressure which is used to predict the compaction pressure and calculate local fiber volume fractions. The predicted non-uniform volume fractions provide local mechanical properties allowing seamless transfer of process effects and properties variability to the final structural analysis. Three demonstrators are presented as examples for simulation and validation against experiments, both in manufacturing and structural performance. The results show very good agreement between simulations and experiments regarding resin flow times and measurements (within 17%) and demonstrators’ structural stiffness (within 15%). © The Author(s) 2022.
|
|
| 9. |
- Udalcovs, Aleksejs, et al.
(författare)
-
MCF-enabled self-homodyne 16/64QAM transmission for SDM optical access networks
- 2018
-
Ingår i: Optics InfoBase Conference Papers. - : OSA - The Optical Society. - 9781557528209
-
Konferensbidrag (refereegranskat)abstract
- We experimentally demonstrate a 28-Gbaud circular and square 16/64QAM transmission over a 33.6-km long seven-core fiber with the LO passed through one of the cores for self-homodyne coherent detection employing a low-complexity digital signal processing.
|
|
| 10. |
- Wu, Yaoxing, et al.
(författare)
-
A reference method for measuring emissions of SVOCs in small chambers
- 2016
-
Ingår i: Building and Environment. - : Elsevier. - 0360-1323 .- 1873-684X. ; 95, s. 126-132
-
Tidskriftsartikel (refereegranskat)abstract
- Semi-volatile organic compounds (SVOCs) are indoor air pollutants that may have significant adverse effects on human health. Although emissions of volatile chemicals from building materials and consumer products are usually characterized in small chambers, few chamber studies have been conducted for SVOCs due to the challenges associated with analysis and the lack of validation procedures. There is an urgent need for a reliable and accurate chamber test method to verify these measurements. A reference method employing a specially-designed chamber has been developed and is undergoing extensive evaluation. A pilot inter-laboratory study (ILS) has been conducted with six laboratories performing chamber tests under identical conditions for di-2-ethylhexyl phthalate (DEHP). Results from this study showed inter-laboratory variations of 24% for DEHP emission rates, with closer agreement observed among intra-laboratory measurements for most of the participating laboratories. A mechanistic emission model fits well to the measured concentration profiles, demonstrating the feasibility of the proposed reference method to independently assess laboratory performance and validate SVOC emission tests.
|
|
