| 1. |
- Jiao, Xingxing, et al.
(författare)
-
Morphology evolution of electrodeposited lithium on metal substrates
- 2023
-
Ingår i: Energy Storage Materials. - 2405-8297. ; 61
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium (Li) metal is deemed to be the high-energy-density anode material for next generation batteries, but its practical application is impeded by the uneven electrodeposition during charge of battery, which leads to the low Coulombic efficiency and potential safety issue. Here, multiscale modeling is fabricated to understand the morphology evolution of Li during electrodeposition process, from the self-diffusion of Li adatoms on electrode surface, to the nucleation process, and to the formation of Li microstructures, revealing the correlation between final morphology and deposition substrates. Energy batteries and self-diffusion of Li adatom on various substrates (lithium, copper, nickel, magnesium, and silver) result in the different nucleation size, which is calculated by kinetic Monte Carlo simulation based on classical nucleation theory. Formation of Li substructures that are grown from Li nuclei, is revealed by phase field modeling coupled with cellular automaton method. Our results show that larger Li nuclei is obtained under faster self-diffusion of Li adatom, leading to the low aspect ratio of Li substructures and the subsequent morphology evolution of electrodeposited Li. Furthermore, the electrodeposition of Li is strongly regulated by the selection of substrates, giving the practical guideline of anode design in rechargeable Li metal batteries. It is worthy to mention that this method to investigate the electro-crystallization process involving nucleation and growth can be transplanted to the other metallic anode, such as sodium, potassium, zinc, magnesium, calcium and the like.
|
|
| 2. |
- Liu, Qiao, et al.
(författare)
-
Enhanced ionic conductivity and interface stability of hybrid solid-state polymer electrolyte for rechargeable lithium metal batteries
- 2019
-
Ingår i: Energy Storage Materials. - : Elsevier BV. - 2405-8297. ; 23, s. 105-111
-
Tidskriftsartikel (refereegranskat)abstract
- Compared to conventional organic liquid electrolyte, solid-state polymer electrolytes are extensively considered as an alternative candidate for next generation high-energy batteries because of their high safety, non-leakage and electrochemical stability with the metallic lithium (Li) anode. However, solid-state polymer electrolytes generally show low ionic conductivity and high interfacial impedance to electrodes. Here we report a hybrid solid-state electrolyte, presenting an ultra-high ionic conductivity of 3.27 mS cm −1 at room temperature, a wide electrochemical stability window of 4.9 V, and non-flammability. This electrolyte consists of a polymer blend matrix (polyethylene oxide and poly (vinylidene fluoride-co-hexafluoropropylene)), Li + conductive ceramic filler (Li 1.5 Al 0.5 Ge 1.5 (PO 4 ) 3 ) and a solvate ionic liquid (LiFSI in tetra ethylene glycol dimethyl ether, 1:1 in molar ratio) as plasticizer. The introduction of the solvate ionic liquid to the solid-state electrolyte not only improves its ionic conductivity but also remarkably enhances the stability of the interface with Li anode. When applied in Li metal batteries, a Li|Li symmetric cell can operate stably over 800 h with a minimal polarization of 25 mV and a full Li|LiFePO 4 cell delivers a high specific capacity of 158 mAh g −1 after 100 cycles at room temperature.
|
|
| 3. |
- Liu, Yangyang, et al.
(författare)
-
Insight into the Critical Role of Exchange Current Density on Electrodeposition Behavior of Lithium Metal
- 2021
-
Ingår i: Advanced Science. - : Wiley. - 2198-3844 .- 2198-3844. ; 8:5
-
Tidskriftsartikel (refereegranskat)abstract
- Due to an ultrahigh theoretical specific capacity of 3860 mAh g−1, lithium (Li) is regarded as the ultimate anode for high-energy-density batteries. However, the practical application of Li metal anode is hindered by safety concerns and low Coulombic efficiency both of which are resulted fromunavoidable dendrite growth during electrodeposition. This study focuses on a critical parameter for electrodeposition, the exchange current density, which has attracted only little attention in research on Li metal batteries. A phase-field model is presented to show the effect of exchange current density on electrodeposition behavior of Li. The results show that a uniform distribution of cathodic current density, hence uniform electrodeposition, on electrode is obtained with lower exchange current density. Furthermore, it is demonstrated that lower exchange current density contributes to form a larger critical radius of nucleation in the initial electrocrystallization that results in a dense deposition of Li, which is a foundation for improved Coulombic efficiency and dendrite-free morphology. The findings not only pave the way to practical rechargeable Li metal batteries but can also be translated to the design of stable metal anodes, e.g., for sodium (Na), magnesium (Mg), and zinc (Zn) batteries.
|
|
| 4. |
- Liu, Yangyang, et al.
(författare)
-
Promoted rate and cycling capability of Li–S batteries enabled by targeted selection of co-solvent for the electrolyte
- 2020
-
Ingår i: Energy Storage Materials. - : Elsevier BV. - 2405-8297. ; 25, s. 131-136
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium sulfur (Li–S) batteries are considered as promising candidates for high-energy-density battery systems owing to the high theoretical capacity of sulfur (1675 mAh g−1) and low cost of raw materials. However, their practical application is hampered by low rate capability and rapid degradation of capacity, arising from the passivation of the cathode by lithium sulfides (Li2S2/Li2S) deposited during discharge and low interfacial stability of the Li anode. Herein, we report on a comprehensive strategy to select co-solvent to the electrolyte to regulate the deposition of lithium sulfides during charge-discharge process. We show that addition of a co-solvent with high solubility, and strong interaction with Li2S to a conventional electrolyte effectively mitigates the formation of a passivating layer on the sulfur cathode and dramatically improves the interfacial stability of the Li anode. We demonstrate that Sulfolane (SL) has these properties and that a Li–S cell with an electrolyte containing 6 vol% SL exhibits outstanding cyclic performance (0.083% decay per cycle) and rate capability (capacity density of 765 mAh g−1 at rate of 1.0C). Thus, we provide a facile strategy for the selection of co-solvent for improved performance of Li–S batteries, realizing their practical application for high-energy-density battery systems.
|
|
| 5. |
- Liu, Yangyang, et al.
(författare)
-
Stable Li metal anode by crystallographically oriented plating through in-situ surface doping
- 2020
-
Ingår i: Science China Materials. - : Springer Science and Business Media LLC. - 2199-4501 .- 2095-8226. ; 63:6, s. 1036-1045
-
Tidskriftsartikel (refereegranskat)abstract
- Lithium (Li) metal is regarded as the holy grail anode material for high-energy-density batteries owing to its ultrahigh theoretical specific capacity. However, its practical application is severely hindered by the high reactivity of metallic Li against the commonly used electrolytes and uncontrolled growth of mossy/dendritic Li. Different from widely-used approaches of optimization of the electrolyte and/or interfacial engineering, here, we report a strategy of in-situ cerium (Ce) doping of Li metal to promote the preferential plating along the [200] direction and remarkably decreased surface energy of metallic Li. The in-situ Ce-doped Li shows a significantly reduced reactivity towards a standard electrolyte and, uniform and dendrite-free morphology after plating/stripping, as demonstrated by spectroscopic, morphological and electrochemical characterizations. In symmetric half cells, the in-situ Ce-doped Li shows a low corrosion current density against the electrolyte and drastically improved cycling even at a lean electrolyte condition. Furthermore, we show that the stable Li LiCoO2 full cells with improved coulombic efficiency and cycle life are also achieved using the Ce-doped Li metal anode. This work provides an inspiring approach to bring Li metal towards practical application in high energy-density batteries.
|
|
