SwePub
Sök i SwePub databas

  Utökad sökning

Träfflista för sökning "WFRF:(Muir K) ;mspu:(researchreview)"

Sökning: WFRF:(Muir K) > Forskningsöversikt

  • Resultat 1-4 av 4
Sortera/gruppera träfflistan
   
NumreringReferensOmslagsbildHitta
1.
  • Joffrin, E., et al. (författare)
  • Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
  • 2019
  • Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
  • Forskningsöversikt (refereegranskat)abstract
    • For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
  •  
2.
  • Harrison, J.R., et al. (författare)
  • Overview of new MAST physics in anticipation of first results from MAST Upgrade
  • 2019
  • Ingår i: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
  • Forskningsöversikt (refereegranskat)abstract
    • The mega amp spherical tokamak (MAST) was a low aspect ratio device (R/a = 0.85/0.65 ∼ 1.3) with similar poloidal cross-section to other medium-size tokamaks. The physics programme concentrates on addressing key physics issues for the operation of ITER, design of DEMO and future spherical tokamaks by utilising high resolution diagnostic measurements closely coupled with theory and modelling to significantly advance our understanding. An empirical scaling of the energy confinement time that favours higher power, lower collisionality devices is consistent with gyrokinetic modelling of electron scale turbulence. Measurements of ion scale turbulence with beam emission spectroscopy and gyrokinetic modelling in up-down symmetric plasmas find that the symmetry of the turbulence is broken by flow shear. Near the non-linear stability threshold, flow shear tilts the density fluctuation correlation function and skews the fluctuation amplitude distribution. Results from fast particle physics studies include the observation that sawteeth are found to redistribute passing and trapped fast particles injected from neutral beam injectors in equal measure, suggesting that resonances between the m = 1 perturbation and the fast ion orbits may be playing a dominant role in the fast ion transport. Measured D-D fusion products from a neutron camera and a charged fusion product detector are 40% lower than predictions from TRANSP/NUBEAM, highlighting possible deficiencies in the guiding centre approximation. Modelling of fast ion losses in the presence of resonant magnetic perturbations (RMPs) can reproduce trends observed in experiments when the plasma response and charge-exchange losses are accounted for. Measurements with a neutral particle analyser during merging-compression start-up indicate the acceleration of ions and electrons. Transport at the plasma edge has been improved through reciprocating probe measurements that have characterised a geodesic acoustic mode at the edge of an ohmic L-mode plasma and particle-in-cell modelling has improved the interpretation of plasma potential estimates from ball-pen probes. The application of RMPs leads to a reduction in particle confinement in L-mode and H-mode and an increase in the core ionization source. The ejection of secondary filaments following type-I ELMs correlates with interactions with surfaces near the X-point. Simulations of the interaction between pairs of filaments in the scrape-off layer suggest this results in modest changes to their velocity, and in most cases can be treated as moving independently. A stochastic model of scrape-off layer profile formation based on the superposition of non-interacting filaments is in good agreement with measured time-average profiles. Transport in the divertor has been improved through fast camera imaging, indicating the presence of a quiescent region devoid of filament near the X-point, extending from the separatrix to ψ n ∼ 1.02. Simulations of turbulent transport in the divertor show that the angle between the divertor leg on the curvature vector strongly influences transport into the private flux region via the interchange mechanism. Coherence imaging measurements show counter-streaming flows of impurities due to gas puffing increasing the pressure on field lines where the gas is ionised. MAST Upgrade is based on the original MAST device, with substantially improved capabilities to operate with a Super-X divertor to test extended divertor leg concepts. SOLPS-ITER modelling predicts the detachment threshold will be reduced by more than a factor of 2, in terms of upstream density, in the Super-X compared with a conventional configuration and that the radiation front movement is passively stabilised before it reaches the X-point. 1D fluid modelling reveals the key role of momentum and power loss mechanisms in governing detachment onset and evolution. Analytic modelling indicates that long legs placed at large major radius, or equivalently low at the target compared with the X-point are more amenable to external control. With MAST Upgrade experiments expected in 2019, a thorough characterisation of the sources of the intrinsic error field has been carried out and a mitigation strategy developed.
  •  
3.
  • Harner, Tom, et al. (författare)
  • Air synthesis review : polycyclic aromatic compounds in the oil sands region
  • 2018
  • Ingår i: Environmental Reviews. - : Canadian Science Publishing. - 1181-8700 .- 1208-6053. ; 26:4, s. 430-468
  • Forskningsöversikt (refereegranskat)abstract
    • This air synthesis review presents the current state of knowledge on the sources, fates, and effects for polycyclic aromatic compounds (PACs) and related chemicals released to air in the oil sands region (OSR) in Alberta, Canada. Through the implementation of the Joint Canada-Alberta Oil Sands Monitoring Program in 2012 a vast amount of new information on PACs has been acquired through directed monitoring and research projects and reported to the scientific community and public. This new knowledge addresses questions related to cumulative effects and informs the sustainable management of the oil sands resource while helping to identify gaps in understanding and priorities for future work. As a result of this air synthesis review on PACs, the following topics have been identified as new science priorities: (i) improving emissions reporting to better account for fugitive mining emissions of PACs that includes a broader range of PACs beyond the conventional polycyclic aromatic hydrocarbons (PAHs) including, inter alia, alkylated-PAHs (alk-PAHs), dibenzothiophene (DBT), alk-DBTs, nitro-PAHs, oxy-PAHs including quinones and thia-and aza-arenes; (ii) improving information on the ambient concentrations, long-range transport, and atmospheric deposition of these broader classes of PACs and their release (with co-contaminants) from different types of mining activities; (iii) further optimizing electricity-free and cost-effective approaches for assessing PAC deposition (e.g., snow sampling, lichens, passive ambient sampling) spatially across the OSR and downwind regions; (iv) designing projects that integrate monitoring efforts with source attribution models and ecosystem health studies to improve understanding of sources, receptors, and effects; (v) further optimizing natural deposition archives (e.g., sediment, peat, tree rings) and advanced forensic techniques (e.g., isotope analysis, marker compounds) to provide better understanding of sources of PACs in the OSR over space and time; (vi) conducting process research to improve model capabilities for simulating atmospheric chemistry of PACs and assessing exposure to wildlife and humans; and (vii) developing tools and integrated strategies for assessing cumulative risk to wildlife and humans by accounting for the toxicity of the mixture of chemicals in air rather than on a single compound basis.
  •  
4.
  • Lechner, A., et al. (författare)
  • Outcomes for Pressure Ulcer Trials (OUTPUTs) project : review and classification of outcomes reported in pressure ulcer prevention research
  • 2021
  • Ingår i: British Journal of Dermatology. - : Blackwell Science Ltd.. - 0007-0963 .- 1365-2133. ; 184:4, s. 617-626
  • Forskningsöversikt (refereegranskat)abstract
    • BACKGROUND: In order to overcome inconsistencies in the reporting of outcomes in clinical trials, core outcome sets (COS) have been developed in many clinical areas and the awareness of this concept is growing steadily. The Outcomes for Pressure Ulcer Trials (OUTPUTs) project aims to improve the quality of evidence on pressure ulcer prevention trials by developing a COS.OBJECTIVES: As an initial step in the COS process we aimed to identify and classify outcomes as well as concepts that represent potential outcomes for future trials that have been reported in pressure ulcer prevention research.METHODS: A review was conducted in twelve major databases covering the literature indexed until 2016. Outcomes and relevant concepts reported in primary studies and/or reviews on pressure ulcer prevention in adult patients were extracted as presented in the articles, and afterwards inductively grouped into outcome domains. The domains were then categorized according to the outcome domain taxonomy recently proposed by the Core Outcome Measures in Effectiveness Trials Group.RESULTS: 332 studies were included and 68 outcome domains were identified, covering multiple aspects of pressure ulcer prevention. Pressure ulcer occurrence was reported in 71% of all included studies representing the most frequent outcome, followed by costs (22% of all studies), and acceptability of intervention and comfort (18% of all studies).CONCLUSION: A plethora of different outcomes is applied in pressure ulcer prevention research and substantial variations in definitions and reporting of similar outcomes were observed. A COS for pressure ulcer prevention trials is needed to overcome the non-comparability of outcomes.
  •  
Skapa referenser, mejla, bekava och länka
  • Resultat 1-4 av 4

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy