| 1. |
- Moberg, Christina, et al.
(författare)
-
De unga gör helt rätt när de stämmer staten
- 2022
-
Ingår i: Aftonbladet. - 1103-9000.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- 1 620 forskare och lärare i forskarvärlden: Vi ställer oss bakom Auroras klimatkrav
|
|
| 2. |
- Nilsson, C. L., et al.
(författare)
-
Chromosome 19 Annotations with Disease Speciation: A First Report from the Global Research Consortium
- 2013
-
Ingår i: Journal of Proteome Research. - : American Chemical Society (ACS). - 1535-3893 .- 1535-3907. ; 12:1, s. 134-149
-
Tidskriftsartikel (refereegranskat)abstract
- A first research development progress report of the Chromosome 19 Consortium with members from Sweden, Norway, Spain, United States, China and India, a part of the Chromosome-centric Human Proteome Project (C-HPP) global initiative, is presented (http://www.c-hpp.org). From the chromosome 19 peptide-targeted library constituting 6159 peptides, a pilot study was conducted using a subset with 125 isotope-labeled peptides. We applied an annotation strategy with triple quadrupole, ESI-Qtrap, and MALDI mass spectrometry platforms, comparing the quality of data within and in between these instrumental set-ups. LC–MS conditions were outlined by multiplex assay developments, followed by MRM assay developments. SRM was applied to biobank samples, quantifying kallikrein 3 (prostate specific antigen) in plasma from prostate cancer patients. The antibody production has been initiated for more than 1200 genes from the entire chromosome 19, and the progress developments are presented. We developed a dedicated transcript microarray to serve as the mRNA identifier by screening cancer cell lines. NAPPA protein arrays were built to align with the transcript data with the Chromosome 19 NAPPA chip, dedicated to 90 proteins, as the first development delivery. We have introduced an IT-infrastructure utilizing a LIMS system that serves as the key interface for the research teams to share and explore data generated within the project. The cross-site data repository will form the basis for sample processing, including biological samples as well as patient samples from national Biobanks.
|
|
| 3. |
- Bondesson, Eva, et al.
(författare)
-
Planar gamma scintigraphy - points to consider when quantifying pulmonary dry powder aerosol deposition
- 2003
-
Ingår i: International Journal of Pharmaceutics. - 1873-3476. ; 251:1-2, s. 33-47
-
Tidskriftsartikel (refereegranskat)abstract
- Methodological aspects of planar gamma scintigraphy used to quantify pulmonary aerosol deposition were investigated using an experimental dry powder formulation. Particles of micronized salbutamol sulphate were labelled with technetium-99m and admixed to an ordered mixture of unlabelled micronized salbutamol sulphate and larger carrier particles of lactose. The radioaerosol was administered to 24 healthy subjects, 12 in each of two consecutive, similarly designed studies. Pulmonary deposition was determined using two methods: repeated planar imaging, and pharmacokinetic assessments following charcoal co-administration to prevent gastrointestinal salbutamol absorption. After due consideration had been taken to ensure appropriate radiolabelling, image acquisition and processing procedures, a scintigraphic estimate of 26.2% (24.2-28.4%) was obtained, which did not significantly differ from the pharmacokinetic estimate of 26.4% (24.4-28.7%). In summary, pre-study validation of the radiolabelling technique, quality control of radioaerosols produced during the study, correction for re-distribution of radiolabel from the lungs, selection of regions of interest, assessment of lung contours, correction for tissue attenuation of gamma rays and establishment of the actual recovery of radioactivity in the scintigraphic measurements could potentially affect the accuracy of the scintigraphic estimate of pulmonary deposition and, thus, should be carefully considered in the design or evaluation of any such study.
|
|
| 4. |
- Borowiec, Jan, et al.
(författare)
-
Effects of heparin-coating of cardiopulmonary bypass circuits on leukocytes during simulated extracorporeal circulation
- 1997
-
Ingår i: Cardiovascular surgery. - 0967-2109 .- 1479-0653. ; 5:6, s. 568-573
-
Recension (övrigt vetenskapligt/konstnärligt)abstract
- Heparin-coated circuits used during extracorporeal circulation reduce many postoperative complications occurring after heart surgery. Such complications are partly related to leukocyte activation with subsequent release of active substances, e.g. oxygen free radicals, myeloperoxidase and lactoferrin. This experiment was performed to elucidate a possible influence of heparin-coating on leukocytes. A 2-h-long simulated extracorporeal circulation was performed on two groups of five extracorporeal circulation circuits, primed with heparinized, fresh whole human blood and Ringer's solution. Heparin-coated circuits (HC group) were compared with uncoated circuits (NC group). Oxygen free radical production was estimated by determination of malonyldialdehyde in plasma and erythrocyte suspension. Granulocyte activation was measured in terms of myeloperoxidase and lactoferrin release. Time-related changes in leukocyte subset counts were analysed. Heparin-coating diminished myeloperoxidase and lactoferrin release. There were significant inter-group differences after 90 and 120 min of extracorporeal circulation for myeloperoxidase (101 (12) microg/l and 107(12) microg/l in the HC group versus 154(20) microg/l and 174(23) microg/l in the NC group), and after 120 min of extracorporeal circulation for lactoferrin (78(5) microg/l in the HC group versus 212(49) microg/l in the NC group). No significant changes of MDA concentration were observed in plasma or erythrocytes; however, a tendency towards lower MDA levels was seen after 90 and 120 min of extracorporeal circulation in the NC group. Neutrophil, monocyte and eosinophil numbers decreased significantly in the NC group but were unchanged in the HC group, as were lymphocyte counts. Heparin-coated extracorporeal circulation circuits significantly reduce granulocyte activation and better preserve the number of circulating neutrophils, eosinophils and monocytes, but do not change oxygen free radical production during simulated extracorporeal circulation.
|
|
| 5. |
- Bozdayi, M., et al.
(författare)
-
Effects of heparin coating of cardiopulmonary bypass circuits on in vitro oxygen free radical production during coronary bypass surgery
- 1996
-
Ingår i: Artificial Organs. - 0160-564X .- 1525-1594. ; 20:9, s. 1008-1016
-
Tidskriftsartikel (refereegranskat)abstract
- During cardiopulmonary bypass (CPB) oxygen free radicals (OFR) are formed, which can mediate reactions damaging tissue components. Blood contact with artificial surfaces during CPB leads to an activation of leukocytes, which are one of the sources of the OFR. Heparin coating of the CPB circuit reduces granulocyte activation. In the present study, the heparin-coated circuits with noncoated cardiotomy reservoirs (Group HC) were compared with noncoated, otherwise similar CPB sets (Group C). In each group, 8 patients were operated on for coronary revascularization. The release of granulocyte granule proteins myeloperoxidase (MPO) and lactoferrin (LF) was evaluated. Production of OFR in the whole blood and in the granulocyte suspension were measured by chemiluminescence (CL). In both groups the whole blood CL declined during CPB. The whole blood CL induced by serum-opsonized zymosan, when enhanced by luminol, was significantly lower in Group HC at 45 min after CPB start (68 +/- 6% of initial values in Group HC vs. 87 +/- 6% in Group C, mean +/- SEM) and 30 min after protaminization (54 +/- 6% of initial values in Group HC vs. 72 +/- 6% in Group C, mean +/- SEM), and CL was significantly higher in Group HC at CPB end (83 +/- 5% of initial values in Group HC vs. 67 +/- 5% in Group C, mean +/- SEM) when enhanced by lucigenin. CL of isolated granulocytes showed no significant differences between the groups. Release of MPO at CPB end and of LF 45 min after start of CPB and at CPB end were significantly lower in the heparin-coated CPB circuits.
|
|
| 6. |
- Grenner, Jan, et al.
(författare)
-
Noise-induced threshold elevation as a function of peak sound pressure level
- 1990
-
Ingår i: Hearing Research. - 0378-5955. ; 46:1-2, s. 161-169
-
Tidskriftsartikel (refereegranskat)abstract
- Thirty-three groups of guinea pigs, consisting of five animals in each group, were exposed to a simulated impact noise with peak levels ranging between 119.5 and 134.5 dB SPL. By varying the repetition rate, different equivalent levels could be set at each peak level. The equivalent levels ranged from 96 to 117 dB SPL, and the exposure duration was 1.5 to 24 hours. The compound action potential thresholds were measured in 1/3-octave steps between 1 and 20 kHz, one month after the exposure. Higher peak levels resulted in a peak-shaped threshold elevation with a maximum around 8 kHz. For constant peak levels, the equal energy theory was supported. For exposures of equal energy but different peak levels, significantly higher threshold elevations resulted after exposure to higher peak levels.
|
|
| 7. |
- Kristiansson, Per, et al.
(författare)
-
Back pain in in-vitro fertilized and spontaneous pregnancies.
- 1998
-
Ingår i: Human Reproduction. - : Oxford University Press (OUP). - 0268-1161 .- 1460-2350. ; 13:11, s. 3233-3238
-
Tidskriftsartikel (refereegranskat)abstract
- The influence of ovarian stimulation in in-vitro fertilization (IVF) on the prevalence of back pain with onset during pregnancy was studied in 31 women who became pregnant after IVF treatment and compared with that of 200 spontaneously pregnant women. A two times higher prevalence rate of sacral pain in late pregnancy was reported among IVF pregnant women (P < 0.0001), as well as a significantly higher prevalence rate of positive results of pelvic pain provocation tests performed in late pregnancy (0.0001 < or = P < or = 0.015), as compared with that of the spontaneously pregnant women. Among the IVF pregnant women, there was a significant positive correlation between relaxin concentrations in early pregnancy and the outcome of pelvic pain provocation tests (0.44 < or = r < or = 0.51, P < 0.05). In addition, the serum relaxin concentration was the factor that best explained differences in sacral pain prevalence. When the influence of serum relaxin concentration on back pain prevalence was taken into account, women carrying multiple pregnancies had no more pain than women carrying singletons, and IVF pregnant women had no more pain than spontaneously pregnant women. These results support the hypothesis that relaxin is involved in the generation of pelvic pain in pregnant women.
|
|
| 8. |
- Lundgren, Joakim, et al.
(författare)
-
Methanol production from steel-work off-gases and biomass based synthesis gas
- 2013
-
Ingår i: Applied Energy. - : Elsevier BV. - 0306-2619 .- 1872-9118. ; 112, s. 431-439
-
Tidskriftsartikel (refereegranskat)abstract
- Off-gases generated during steelmaking are to a large extent used as fuels in process units within the plant. The surplus gases are commonly supplied to a plant for combined heat and power production. The main objective of this study has been to techno-economically investigate the feasibility of an innovative way of producing methanol from these off-gases, thereby upgrading the economic value of the gases. Cases analyzed have included both off-gases only and mixes with synthesis gas, based on 300MWth of biomass. The SSAB steel plant in the town of Luleå, Sweden has been used as a basis. The studied biomass gasification technology is based on a fluidized-bed gasification technology, where the production capacity is determined from case to case coupled to the heat production required to satisfy the local district heating demand. Critical factors are the integration of the gases with availability to the synthesis unit, to balance the steam system of the biorefinery and to meet the district heat demand of Luleå. The annual production potential of methanol, the overall energy efficiency, the methanol production cost and the environmental effect have been assessed for each case. Depending on case, in the range of 102,000-287,000ton of methanol can be produced per year at production costs in the range of 0.80-1.1EUR per liter petrol equivalent at assumed conditions. The overall energy efficiency of the plant increases in all the cases, up to nearly 14%-units on an annual average, due to a more effective utilization of the off-gases. The main conclusion is that integrating methanol production in a steel plant can be made economically feasible and may result in environmental benefits as well as energy efficiency improvements. © 2013 Elsevier Ltd.
|
|
| 9. |
- Malm, Johan, et al.
(författare)
-
Developments in biobanking workflow standardization providing sample integrity and stability
- 2013
-
Ingår i: Journal of Proteomics. - : Elsevier BV. - 1874-3919 .- 1876-7737. ; 95:SI, s. 38-45
-
Tidskriftsartikel (refereegranskat)abstract
- Recommendations and outlines for standardization in biobanking processes are presented by a research team with long-term experience in clinical studies. These processes have important bearing on the use of samples in developing assays. These measurements are useful to document states of health and disease that are beneficial for academic research, commercial healthcare, drug development industry and government regulating agencies. There is a need for increasing awareness within proteomic and genomic communities regarding the basic concepts of collecting, storing and utilizing clinical samples. Quality control and sample suitability for analysis need to be documented and validated to ensure data integrity and establish contexts for interpretation of results. Standardized methods in proteomics and genomics are required to be practiced throughout the community allowing datasets to be comparable and shared for analysis. For example, sample processing of thousands of clinical samples, performed in 384 high-density sample tube systems in a fully automated workflow, preserves sample content and is presented showing validation criteria. Large studies will be accompanied by biological and molecular information with corresponding clinical records from patients and healthy donors. These developments position biobanks of human patient samples as an increasingly recognized major asset in disease research, future drug development and within patient care. Biological significance: The current manuscript is of major relevance to the proteomic and genomic fields, as it outlines the standardization aspects of biobanking and the requirements that are needed to run future clinical studies that will benefit the patients where OMICS science will play a major role. A global view of the field is given where best practice and conventional acceptances are presented along with ongoing large-scale biobanking projects. The authors represent broadly stakeholders that cover the academic, pharma, biotech and healthcare fields with extensive experience and deliveries. This contribution will be a milestone paper to the proteomic and genomic scientists to present data in the future that will have impact to the life science area.This article is part of a Special Issue entitled: Standardization and Quality Control in Proteomics.
|
|
| 10. |
- Muhic, Dino, et al.
(författare)
-
Influence of temperature on energy efficiency in double disc chip refining
- 2009
-
Ingår i: Proceedings - 2009 International Mechanical Pulping Conference, IMPC 2009. ; , s. 344-347
-
Konferensbidrag (refereegranskat)abstract
- As part of the investment project at Holmen Paper Braviken, the primary stage refining system of counter-rotating RGP68DD refiners (Metso) has been investigated. It is considered to be one of the most energy efficient refiners when comparing to e.g. tensile index. The aim with this work is to optimize the refining conditions for the RGP68DD in regard to refining temperature. Full-scale trials were made where SEC and temperature were successively increased at the same time. The SEC was mainly controlled with motor load and production rate. Feed- and housing- pressure were used to control temperature. The results show that stable specific energy consumption, and refining conditions regarding temperature, resulted in a pulp with increased quality.
|
|
